Browsing by Author "Mondal, Santanu"
Now showing 1 - 1 of 1
Results Per Page
Sort Options
- Advanced Synthesis of Ultra-High Temperature Ceramics (UHTCs) and High Temperature Electron Emitting MaterialsMondal, Santanu (Virginia Tech, 2024-02-06)From space exploration and advanced aircraft to next generation weapons, achieving hypersonic speed is becoming increasingly important across a range of research domains. The immense challenge associated with this goal involves the development of suitable materials and systems for the different components of a hypersonic vehicle, each of which must have the inherent capability to resist extreme temperatures, high thermal shock due to high heat flux, and high oxidation and ablation. First, the ultra-high temperature ceramic (UHTC) zirconium diboride or ZrB2 was sintered by ultra-fast high temperature sintering (UHS). The UHS process was optimized and the sintering parameters for ZrB2 and other UHTCs were studied. ZrB2 is an ultra-high temperature ceramic (UHTC) with a very high melting point; thus, its densification is difficult, energy intensive, and time-consuming. Commercial ZrB2 powders were rapidly densified via UHS to >90% relative density within 60 second in vacuum without pressure. The effect of sintering time on densification and final grain size were studied. An innovative process for manufacturing bulk UHTC materials was studied and is detailed herein. Second, the work function (W_f) of electron emitting materials was reduced to improved performance. A reduction of W_f in multicomponent hexaborides was achieved by doping with highly electropositive Ba, which enhances electron emission. Single-phase bulk multicomponent polycrystalline hexaborides of La0.5Ba0.5B6, Ce0.5Ba0.5B6, and BaB6 powders were first synthesized and then densified by UHS sintering. W_f measurements were obtained by Kelvin probe force microscopy. Ba-substitution was found to lower W_f (~25%) in synthesized multicomponent hexaborides. The specific techniques required to engineer the W_f of these materials are also provided herein. Finally, combining low W_f materials with UHTCs was explored for thin film systems for the exterior surface of hypersonic vehicles. The thin films of CeB6, a low W_f material, was deposited on sintered ZrB2 by RF-sputtering and single crystalline SrTiO3 (STO) substrates. Epitaxial thin films of SrHfO3 (SHO) were also deposited on (100), (110) and (111) STO substrates at 600°C. X-ray diffraction (XRD) results confirmed the formation of epitaxial layer, and reciprocal space mapping (RSM) was used to characterize film's mosaicity / texture on different substrates. XRD and RSM data demonstrated that the most favorable film growth direction was (110). As detailed herein, an inexpensive thin film production process, RF-sputtering, was exploited to manufacture various epitaxial and non-epitaxial layers of low W_f materials on UHTC and single-crystal substrates for hypersonic vehicles. To summarize, a range of bulk UHTCs and low W_f materials were prepared by UHS, and various thin films of low W_f material were produced on UHTC. Thereafter, the properties of synthesized materials were studied to develop new material systems for hypersonic applications. The findings from this research shed light on the development of suitable materials for implementation of electron transpiration cooling for hypersonic vehicle development.