VTechWorks staff will be away for the Thanksgiving holiday beginning at noon on Wednesday, November 27, through Friday, November 29. We will resume normal operations on Monday, December 2. Thank you for your patience.

Browsing by Author "Plante, Angela J."

Now showing 1 - 3 of 3
  • Thumbnail Image
    Controlled dopant diffusion for fiber optic coupler
    (United States Patent and Trademark Office, 1998-09-15)
    Uniformity of optical coupling of optical elements such as couplers and splitters is improved by heat treatment which causes dopants in the core of an optical fiber to diffuse into material from the cladding layer of the optical fibers from which the optical element is formed, resulting in a substantially homogeneous interior region of the star coupler or splitter. Increased lossiness of the optical element thus formed may be limited by termination of the heat treatment before dopant diffusion reaches equilibrium throughout the fibers so that a portion of the cladding layer of the fibers remains surrounding the substantially homogeneous region where the fibers have been fused together. Dopant diffusion is constrained to a substantially radial direction in each fiber by uniformity of heating over a region where at least two fibers are twisted together. Thus dopant diffusion is highly repeatable and can be readily regulated to provide highly selective, wavelength-dependent coupling between fibers, particularly for multiplexing and demultiplexing applications.
  • Thumbnail Image
    Photoinduced Fresnel reflectors in germanium-doped optical fibers
    Plante, Angela J. (Virginia Tech, 1994)
    A novel method of fabricating low reflectance mirrors has been developed based on the photosensitivity of hydrogen-loaded, germanium-doped optical fibers. Using a side-writing technique, point-wise refractive index changes have been induced in the core of Ge-doped optical fibers via ultraviolet light from a high power excimer laser. These refractive index changes cause Fresnel reflections at the boundary of the higher photoinduced index change and the lower index in the unexposed core. The boundary of the two refractive indices may be considered a low reflectance mirror. Several techniques have been explored to characterize the Fresnel reflectors including optical time domain reflectometry (OTDR) and spectral analysis. In-line, optical fiber Fresnel reflectors have applications as internal mirrors in intrinsic Fabry-Perot interferometric (IFPI) sensors and OTDR distributed strain sensors. Photoinduced IFPI sensors have performed well as temperature sensors, strain sensors, and vibration sensors. Improved manufacturing techniques are also discussed for future developments. The photoinduced IFPI sensor is inexpensive to manufacture and involves little skill, in contrast to the labor-intensive fabrication techniques of conventional IFPI sensors. The IFPI sensor has commercial applications in embedded structures, high temperature environments, and situations with large EMI conditions.
  • Thumbnail Image
    Split-Spectrum Intensity-Based Optical Fiber Sensors For Measurement Of Microdisplacement, Strain, And Pressure
    Wang, Anbo; Miller, Mark S.; Plante, Angela J.; Gunther, Michael F.; Murphy, Kent A.; Claus, Richard O. (Optical Society of America, 1996-08-01)
    A self-referencing technique compensating for fiber losses and source fluctuations in reflective air-gap intensity-based optical fiber sensors is described. A dielectric multilayer short-wave-pass filter is fabricated onto or attached to the output end face of the lead-in-lead-out multimode fiber. The incoming broadband light from a white light or a light-emitting diode is partially reflected at the filter. The transmitted light through the filter projects onto a mirror The light returning from the reflecting mirror is recoupled into the lead-in-lead-out fiber. These two reflections from the filter and the reflecting mirror are spectrally separated at the detector end. The power ratio of these two reflections is insensitive to source fluctuations and fiber-bending loss. However, because the second optical signal depends on the air-gap separation between the end face of the lead-in-lead-out fiber and the reflecting mirror, the ratio provides the information on the air-gap length. A resolution of 0.13 mu m has been obtained over a microdisplacement measurement range of 0-254 mu m. The sensor is shown to be insensitive to both fiber-bending losses and variations in source power. Based on this approach, a fiber-strain sensor was fabricated with a multilayer interference filter directly fabricated on the end face of the fiber. A resolution of 13.4 microstrain was obtained over a measurement range of 0-20,000 microstrain with a gauge length of 10 mm. The split-spectrum method is also incorporated into a diaphragm displacement-based pressure sensor with a demonstrated resolution of 450 Pa over a measurement range of 0-0.8 MPa. (C) 1996 Optical-Society of America