Browsing by Author "Prussin, Aaron J. II"

Now showing 1 - 10 of 10
  • Thumbnail Image
    Building Interdisciplinary Partnerships for Community-Engaged Environmental Health Research in Appalachian Virginia
    Satterwhite, Emily M.; Bell, Shannon E.; Marr, Linsey C.; Thompson, Christopher K.; Prussin, Aaron J. II; Buttling, Lauren G.; Pan, Jin; Gohlke, Julia M. (MDPI, 2020-03-05)
    This article describes a collaboration among a group of university faculty, undergraduate students, local governments, local residents, and U.S. Army staff to address long-standing concerns about the environmental health effects of an Army ammunition plant. The authors describe community-responsive scientific pilot studies that examined potential environmental contamination and a related undergraduate research course that documented residents’ concerns, contextualized those concerns, and developed recommendations. We make a case for the value of resource-intensive university–community partnerships that promote the production of knowledge through collaborations across disciplinary paradigms (natural/physical sciences, social sciences, health sciences, and humanities) in response to questions raised by local residents. Our experience also suggests that enacting this type of research through a university class may help promote researchers’ adoption of “epistemological pluralism”, and thereby facilitate the movement of a study from being “multidisciplinary” to “transdisciplinary”.
  • Thumbnail Image
    Coordinated Sampling of Microorganisms Over Freshwater and Saltwater Environments Using an Unmanned Surface Vehicle (USV) and a Small Unmanned Aircraft System (sUAS)
    Powers, Craig W.; Hanlon, Regina; Grothe, Hinrich; Prussin, Aaron J. II; Marr, Linsey C.; Schmale, David G. III (Frontiers, 2018-08-15)
    Biological aerosols (bioaerosols) are ubiquitous in terrestrial and aquatic environments and may influence cloud formation and precipitation processes. Little is known about the aerosolization and transport of bioaerosols from aquatic environments. We designed and deployed a bioaerosol-sampling system onboard an unmanned surface vehicle (USV; a remotely operated boat) to collect microbes and monitor particle sizes in the atmosphere above a salt pond in Falmouth, MA, United States and a freshwater lake in Dublin, VA, United States. The bioaerosol-sampling system included a series of 3D-printed impingers, two different optical particle counters, and a weather station. A small unmanned aircraft system (sUAS; a remotely operated airplane) was used in a coordinated effort with the USV to collect microorganisms on agar media 50 m above the surface of the water. Samples from the USV and sUAS were cultured on selective media to estimate concentrations of culturable microorganisms (bacteria and fungi). Concentrations of microbes from the sUAS ranged from 6 to 9 CFU/m3 over saltwater, and 12 to 16 CFU/m3 over freshwater (over 10-min sampling intervals) at 50 m above ground level (AGL). Concentrations from the USV ranged from 0 (LOD) to 42,411 CFU/m3 over saltwater, and 0 (LOD) to 56,809 CFU/m3 over freshwater (over 30-min sampling intervals) in air near the water surface. Particle concentrations recorded onboard the USV ranged from 0 (LOD) to 288 μg/m3 for PM1, 1 to 290 μg/m3 for PM2.5, and 1 to 290 μg/m3 for PM10. A general trend of increasing concentration with an increase in particle size was recorded by each sensor. Through laboratory testing, the collection efficiency of the 3D-printed impingers was determined to be 75% for 1 μm beads and 99% for 3 μm beads. Additional laboratory tests were conducted to determine the accuracy of the miniaturized optical particle counters used onboard the USV. Future work aims to understand the distribution of bioaerosols above aquatic environments and their potential association with cloud formation and precipitation processes.
  • Thumbnail Image
    Infectious SARS-CoV-2 Is Emitted in Aerosol Particles
    Hawks, Seth A.; Prussin, Aaron J. II; Kuchinsky, Sarah C.; Pan, Jin; Marr, Linsey C.; Duggal, Nisha K. (American Society for Microbiology, 2021-10-19)
    Respiratory viruses such as SARS-CoV-2 are transmitted in respiratory droplets and aerosol particles, which are released during talking, breathing, coughing, and sneezing. Noncontact transmission of SARS-CoV-2 has been demonstrated, suggesting transmission via virus carried through the air. Here, we demonstrate that golden Syrian hamsters produce infectious SARS-CoV-2 in aerosol particles prior to and concurrent with the onset of mild clinical signs of disease. The average emission rate in this study was 25 infectious virions/hour on days 1 and 2 postinoculation, with average viral RNA levels 200-fold higher than infectious virus in aerosol particles. The majority of virus was contained within particles <5 μm in size. Thus, we provide direct evidence that, in hamsters, SARS-CoV-2 is an airborne virus.
  • Thumbnail Image
    Influenza Virus Infectivity Is Retained in Aerosols and Droplets Independent of Relative Humidity
    Kormuth, Karen A.; Lin, Kaisen; Prussin, Aaron J. II; Vejerano, Eric P.; Tiwari, Andrea J.; Cox, Steve S.; Myerburg, Michael M.; Lakdawala, Seema S.; Marr, Linsey C. (Oxford University Press, 2018-06-07)
    Pandemic and seasonal influenza viruses can be transmitted through aerosols and droplets, in which viruses must remain stable and infectious across a wide range of environmental conditions. Using humidity-controlled chambers, we studied the impact of relative humidity on the stability of 2009 pandemic influenza A(H1N1) virus in suspended aerosols and stationary droplets. Contrary to the prevailing paradigm that humidity modulates the stability of respiratory viruses in aerosols, we found that viruses supplemented with material from the apical surface of differentiated primary human airway epithelial cells remained equally infectious for 1 hour at all relative humidities tested. This sustained infectivity was observed in both fine aerosols and stationary droplets. Our data suggest, for the first time, that influenza viruses remain highly stable and infectious in aerosols across a wide range of relative humidities. These results have significant implications for understanding the mechanisms of transmission of influenza and its seasonality.
  • Thumbnail Image
    Seasonal dynamics of DNA and RNA viral bioaerosol communities in a daycare center
    Prussin, Aaron J. II; Torres, Pedro J.; Shimashita, John; Head, Steven R.; Bibby, Kyle J.; Kelley, Scott T.; Marr, Linsey C. (2019-04-01)
    Background Viruses play an important role in ecosystems, including the built environment (BE). While numerous studies have characterized bacterial and fungal microbiomes in the BE, few have focused on the viral microbiome (virome). Longitudinal microbiome studies provide insight into the stability and dynamics of microbial communities; however, few such studies exist for the microbiome of the BE, and most have focused on bacteria. Here, we present a longitudinal, metagenomic-based analysis of the airborne DNA and RNA virome of a children’s daycare center. Specifically, we investigate how the airborne virome varies as a function of season and human occupancy, and we identify possible sources of the viruses and their hosts, mainly humans, animals, plants, and insects. Results Season strongly influenced the airborne viral community composition, and a single sample collected when the daycare center was unoccupied suggested that occupancy also influenced the community. The pattern of influence differed between DNA and RNA viromes. Human-associated viruses were much more diverse and dominant in the winter, while the summertime virome contained a high relative proportion and diversity of plant-associated viruses. Conclusions This airborne microbiome in this building exhibited seasonality in its viral community but not its bacterial community. Human occupancy influenced both types of communities. By adding new data about the viral microbiome to complement burgeoning information about the bacterial and fungal microbiomes, this study contributes to a more complete understanding of the airborne microbiome.
  • Thumbnail Image
    Seasonal Dynamics of the Airborne Bacterial Community and Selected Viruses in a Children's Daycare Center
    Prussin, Aaron J. II; Vikram, Amit; Bibby, Kyle J.; Marr, Linsey C. (PLOS, 2016-03-04)
    Children’s daycare centers appear to be hubs of respiratory infectious disease transmission, yet there is only limited information about the airborne microbial communities that are present in daycare centers. We have investigated the microbial community of the air in a daycare center, including seasonal dynamics in the bacterial community and the presence of specific viral pathogens. We collected filters from the heating, ventilation, and air conditioning (HVAC) system of a daycare center every two weeks over the course of a year. Amplifying and sequencing the 16S rRNA gene revealed that the air was dominated by Proteobacteria, Firmicutes, Actinobacteria, and Bacteroidetes that are commonly associated with the human skin flora. Clear seasonal differences in the microbial community were not evident; however, the community structure differed when the daycare center was closed and unoccupied for a 13-day period. These results suggest that human occupancy, rather than the environment, is the major driver in shaping the microbial community structure in the air of the daycare center. Using PCR for targeted viruses, we detected a seasonal pattern in the presence of respiratory syncytial virus that included the period of typical occurrence of the disease related to the virus; however, we did not detect the presence of adenovirus or rotavirus at any time.
  • Thumbnail Image
    Sources of airborne microorganisms in the built environment
    Prussin, Aaron J. II; Marr, Linsey C. (Biomed Central, 2015-12-22)
    Each day people are exposed to millions of bioaerosols, including whole microorganisms, which can have both beneficial and detrimental effects. The next chapter in understanding the airborne microbiome of the built environment is characterizing the various sources of airborne microorganisms and the relative contribution of each. We have identified the following eight major categories of sources of airborne bacteria, viruses, and fungi in the built environment: humans; pets; plants; plumbing systems; heating, ventilation, and air-conditioning systems; mold; dust resuspension; and the outdoor environment. Certain species are associated with certain sources, but the full potential of source characterization and source apportionment has not yet been realized. Ideally, future studies will quantify detailed emission rates of microorganisms from each source and will identify the relative contribution of each source to the indoor air microbiome. This information could then be used to probe fundamental relationships between specific sources and human health, to design interventions to improve building health and human health, or even to provide evidence for forensic investigations.
  • Thumbnail Image
    Survival of the Enveloped Virus Phi6 in Droplets as a Function of Relative Humidity, Absolute Humidity, and Temperature
    Prussin, Aaron J. II; Schwake, David Otto; Lin, Kaisen; Gallagher, Daniel L.; Buttling, Lauren G.; Marr, Linsey C. (American Society for Microbiology, 2018-04-06)
    Infectious diseases caused by enveloped viruses, such as influenza, severe acute respiratory syndrome (SARS), and Middle East respiratory syndrome (MERS), cause thousands of deaths and billions of dollars of economic losses per year. Studies have found a relationship among temperature, humidity, and influenza virus incidence, transmission, or survival; however, there are contradictory claims about whether absolute humidity (AH) or relative humidity (RH) is most important in mediating virus infectivity. Using the enveloped bacteriophage Phi6, which has been suggested as a surrogate for influenza viruses and coronaviruses, we designed a study to discern whether AH, RH, or temperature is a better predictor of virus survival in droplets. Our results show that Phi6 survived best at high (>85%) and low (<60%) RHs, with a significant decrease in infectivity at mid-range RHs (~60 to 85%). At an AH of less than 22 g · m⁻³, the loss in infectivity was less than 2 orders of magnitude; however, when the AH was greater than 22 g · m⁻³, the loss in infectivity was typically greater than 6 orders of magnitude. At a fixed RH of 75%, infectivity was very sensitive to temperature, decreasing two orders of magnitude between 19°C and 25°C. We used random forest modeling to identify the best environmental predictors for modulating virus infectivity. The model explained 83% of variation in Phi6 infectivity and suggested that RH is the most important factor in controlling virus infectivity in droplets. This research provides novel information about the complex interplay between temperature, humidity, and the survival of viruses in droplets.
  • Thumbnail Image
    Ten questions concerning the aerosolization and transmission of Legionella in the built environment
    Prussin, Aaron J. II; Schwake, David Otto; Marr, Linsey C. (2017-10)
    Legionella is a genus of pathogenic Gram-negative bacteria responsible for a serious disease known as legionellosis, which is transmitted via inhalation of this pathogen in aerosol form. There are two forms of legionellosis: Legionnaires' disease, which causes pneumonia-like symptoms, and Pontiac fever, which causes influenza-like symptoms. Legionella can be aerosolized from various water sources in the built environment including showers, faucets, hot tubs/swimming pools, cooling towers, and fountains. Incidence of the disease is higher in the summertime, possibly because of increased use of cooling towers for air conditioning systems and differences in water chemistry when outdoor temperatures are higher. Although there have been decades of research related to Legionella transmission, many knowledge gaps remain. While conventional wisdom suggests that showering is an important source of exposure in buildings, existing measurements do not provide strong support for this idea. There has been limited research on the potential for Legionella transmission through heating, ventilation, and air conditioning (HVAC) systems. Epidemiological data suggest a large proportion of legionellosis cases go unreported, as most people who are infected do not seek medical attention. Additionally, controlled laboratory studies examining water-to-air transfer and source tracking are still needed. Herein, we discuss ten questions that spotlight current knowledge about Legionella transmission in the built environment, engineering controls that might prevent future disease outbreaks, and future research that is needed to advance understanding of transmission and control of legionellosis. (C) 2017 The Authors. Published by Elsevier Ltd.
  • Thumbnail Image
    Viruses in the Built Environment (VIBE) meeting report
    Prussin, Aaron J. II; Belser, Jessica A.; Bischoff, Werner; Kelley, Scott T.; Lin, Kaisen; Lindsley, William G.; Nshimyimana, Jean P.; Schuit, Michael; Wu, Zhenyu; Bibby, Kyle J.; Marr, Linsey C. (2020-01-04)
    Background During a period of rapid growth in our understanding of the microbiology of the built environment in recent years, the majority of research has focused on bacteria and fungi. Viruses, while probably as numerous, have received less attention. In response, the Alfred P. Sloan Foundation supported a workshop entitled “Viruses in the Built Environment (VIBE),” at which experts in environmental engineering, environmental microbiology, epidemiology, infection prevention, fluid dynamics, occupational health, metagenomics, and virology convened to synthesize recent advances and identify key research questions and knowledge gaps regarding viruses in the built environment. Results Four primary research areas and funding priorities were identified. First, a better understanding of viral communities in the built environment is needed, specifically which viruses are present and their sources, spatial and temporal dynamics, and interactions with bacteria. Second, more information is needed about viruses and health, including viral transmission in the built environment, the relationship between virus detection and exposure, and the definition of a healthy virome. The third research priority is to identify and evaluate interventions for controlling viruses and the virome in the built environment. This encompasses interactions among viruses, buildings, and occupants. Finally, to overcome the challenge of working with viruses, workshop participants emphasized that improved sampling methods, laboratory techniques, and bioinformatics approaches are needed to advance understanding of viruses in the built environment. Conclusions We hope that identifying these key questions and knowledge gaps will engage other investigators and funding agencies to spur future research on the highly interdisciplinary topic of viruses in the built environment. There are numerous opportunities to advance knowledge, as many topics remain underexplored compared to our understanding of bacteria and fungi. Video abstract.