Browsing by Author "Rahman, Aevelina"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Characterization of Heat Transfer Enhancement for an Oscillating Flat Plate-Fin
    Rahman, Aevelina (Virginia Tech, 2020-03)
    Heat transfer augmentation is of paramount importance in energy transfer and storage systems and the idea of using the inherent vibrations in a system to enhance heat transfer needs to be thoroughly researched upon. The current study numerically investigates an infinitesimally thin plate-fin undergoing forced oscillations over a range of amplitudes and frequencies in the presence of an approach flow. Reduced frequencies of 0.25 ≤ k ≤16 and plunge amplitudes of 0.03125 ≤ h ≤ 8 are investigated at Re=100 and Pr = 0.71. It is shown that the combined effect of frequency and amplitude on heat transfer enhancement can be accounted for as a single parameter “plunge velocity” (0.25 ≤ kh ≤ 4) instead of the individual frequency and amplitude values. For kh > 0.5 a significant increase in Nusselt number ( is observed compared to a stationary plate. With increasing kh or more vigorous oscillations, the increase in becomes more prominent and similar trends and comparable magnitudes were observed for a constant value. Unlike the hydrodynamic counterpart of the study, both Leading Edge Vortices (LEVs) and Trailing Edge Vortices (TEVs) are found to act positively to induce enhanced heat transfer on the plate. Finally, the dependence of heat transfer augmentation on the frequency and amplitude of vibration is quantified with a simple parameterization for a plate-fin in a fluid medium.
  • Thumbnail Image
    From Oscillating Flat Plate to Maneuvering Bat Flight – Role of Kinematics, Aerodynamics, and Inertia
    Rahman, Aevelina (Virginia Tech, 2022-02-01)
    With the aim to understand the synergistic roles played by kinematics, aerodynamics, and inertia in flapping wing maneuvers, this thesis first investigates the plunging motion of a simple flat plate as it is a fundamental motion in the kinematics of many flying animals. A wide range of frequency (k) and amplitude (h) is investigated to account for a robust kinematic characterization in the form of plunge velocity (kh). Leading Edge Vortices (LEVs) are found to be responsible for producing thrust while Trailing Edge Vortices (TEVs) produce drag. The vortex dynamics becomes nonlinear for higher kh and three main vortex-vortex interactions (VVI) are identified in the flow-field. To estimate the sole effect of LEVs on thrust coefficient, TEVs are eliminated by introducing a splitter plate. This resulted in reduced non-linearity in VVI and facilitated a parametrization of aerodynamic thrust coefficient with key kinematic features, frequency (k) and amplitude (h) [C_T= A.k^1.4 h-B where A and B are constants]. This is followed by investigating the more direct problem of bio-inspired MAV research – the interplay of kinematics, aerodynamics, and inertia on maneuvering bat flights. At first, an ascending right turn of a H. pratti bat is investigated to elucidate on the kinematic features and aerodynamic mechanisms used to effectuate the maneuver. Deceleration in flight speed, an increase in flapping frequency, shortening of the upstroke, and thrust generation at the end of the upstroke is observed during this maneuver. The turn is initiated by the synergisytic implementation of roll and yaw rotation where the turning moments are generated by drawing the inside wing closer to the body, by introducing phase lags in force generation between the two wings and by redirecting force production to the outer part of the wing outside of the turn. Upon comparison with a similar maneuver by a H. armiger bat, some commonalities as well as differences were observed. This analysis was followed by a comparative study among different maneuvering flights (a straight flight, two ascending right turns, and a U-turn) in order to establish the complete motion dynamics of a maneuver in action. The individual effects of aerodynamics and wing inertia for maneuvering flights of a H. armiger and H. pratti are investigated. It is found that for both, translation and rotation the overall trajectory trend is mostly driven by the aerodynamic forces and moments, whereas inertial effects drive the intricate intra-cycle fluctuations as well as the vertical velocity and altitude gain during ascent. Additionally, inertial moments play a dominant role for effecting yaw rotations where the importance of the Coriolis and centrifugal moments increase with increasing acuteness of the maneuver, with the largest effect of centrifugal moments being evidenced in the U-turn.
  • Thumbnail Image
    Turning-ascending flight of a Hipposideros pratti bat
    Rahman, Aevelina; Windes, Peter; Tafti, Danesh (Royal Society, 2022-06-08)
    Bats exhibit a high degree of agility and provide an excellent model system for bioinspired flight. The current study investigates an ascending right turn of a Hipposideros pratti bat and elucidates on the kinematic features and aerodynamic mechanisms used to effectuate the manoeuvre. The wing kinematics captured by a three-dimensional motion capture system is used as the boundary condition for the aerodynamic simulations featuring immersed boundary method. Results indicate that the bat uses roll and yaw rotations of the body to different extents synergistically to generate the centripetal force to initiate and sustain the turn. The turning moments are generated by drawing the wing inside the turn closer to the body, by introducing phase lags in force generation between the wings and redirecting force production to the outer part of the wing outside of the turn. Deceleration in flight speed, an increase in flapping frequency, shortening of the upstroke and thrust generation at the end of the upstroke were observed during the ascending manoeuvre. The bat consumes about 0.67 W power to execute the turning-ascending manoeuvre, which is approximately two times the power consumed by similar bats during level flight. Upon comparison with a similar manoeuvre by a Hipposideros armiger bat (Windes et al. 2020 Bioinspir. Biomim. 16, abb78d. (doi:10.1088/1748-3190/ abb78d)), some commonalities, as well as differences, were observed in the detailed wing kinematics and aerodynamics.