VTechWorks staff will be away for the winter holidays starting Tuesday, December 24, 2024, through Wednesday, January 1, 2025, and will not be replying to requests during this time. Thank you for your patience, and happy holidays!

Browsing by Author "Sullivan, Kelly Marie"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Rotating Disk Electrode Design for Concentration Measurements in Flowing Molten Chloride Salts
    Sullivan, Kelly Marie (Virginia Tech, 2022-07-25)
    Over the past several years as interest in cleaner energy sources has grown nuclear power has come to the forefront. However, as interest in nuclear power grows so does the concern over the amount of high-level radioactive waste produced. Currently, the most popular way to deal with spent nuclear fuel is interim storage until a viable treatment option becomes available. Simply waiting for spent fuel to become safe to handle will take thousands of years and is not a reasonable long-term solution. We will soon run out of space in our spent fuel pools and while more dry storage space can be found it is not an ideal solution. One answer to this problem is the reprocessing of spent nuclear fuel. This could be done with either the plutonium uranium reduction extraction (PUREX) method or the pyroprocessing method. Since PUREX does not have the same level of built-in proliferation resistance as pyroprocessing, pyroprocessing is starting to be seen as a good alternative method. Pyroprocessing would take the spent nuclear fuel from a light water reactor and make it into a metal-based fuel that could be used in certain advanced reactors. Molten salt reactors are of particular interest when it comes to reprocessing spent nuclear fuel because of their unique property of using a liquid fuel. Molten salt reactors and spent fuel reprocessors could be directly connected which would save both time and money as little storage and transportation would need to be considered. Regardless of how and where the used nuclear fuel is being recycled it is important to be able to keep track of the major actinides and fission products in the fuel as it moves through the process. Electrochemical concentration measurements are straightforward and well understood in static cases when there is only a single element to consider. When additional elements are added, or the system is flowing rather than static, things get slightly more complicated but are still decently well understood. However, in the case of spent fuel reprocessing the system is both be flowing and contains much more than a single element. This case is not well understood and is what this study attempts to understand. Two different rotating electrodes were designed to simulate flowing conditions in an electrochemical cell. The first was a tungsten rotating disk electrode (RDE) and the second was a graphite RDE. We were not able to fully insulate the tungsten RDE and were therefore unable to achieve reliable results. Because of this the tungsten design was put aside in favor of the graphite design, which did prove to be sufficiently insulated. The graphite RDE was tested in two different salt systems: LiCl-KCl-NiCl2-CrCl2 and LiCl-KCl-EuCl3-SmCl3. In the nickel-chromium system the graphite RDE produced the expected results. The calculated nickel concentration was found to be within 10% of the measured concentration. Calculations of the chromium concentration, however, were not possible due to the deposition of nickel on the graphite surface, which increased the surface area of the working electrode. When the graphite RDE was tested in the second system it was first tested in the ternary salt LiCl-KCl-EuCl3 and was able to produce decent results. The concentration of europium calculated from the scan was within 10% of the measured value. When the RDE was tested in the LiCl-KCl-EuCl3-SmCl3 salt the results did not come out as expected. Several rather noisy CV curves were obtained and no alterations to the cell seemed to affect them. At this point it was determined that the reason for the confused scans was a connection problem that could not be remedied within the time frame of this study. While this study does not accomplish the task it set out to do, it is a good step in the direction toward understanding flowing systems containing more than a single element of interest and has successfully designed a reliable graphite RDE.