Browsing by Author "Tavakol, Behrouz"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Buckling at the Fluid - Soft Solid Interface; A Means for Advanced Functionality within Soft Materials
    Tavakol, Behrouz (Virginia Tech, 2015-09-02)
    Soft materials and compliant structures often undergo significant deformation without failure, a unique feature making them distinct from classical rigid materials. These substantial deformations provide a means for faster or more energy efficient deformations, which can be achieved by taking advantage of elastic instabilities. We intend to utilize structural instabilities to generate advanced functionality within soft materials. In particular, we use the buckling of thin, flexible plates to control or enhance the flow of fluid in a micro channel. The buckling deformation is created or altered via two different stimuli, first a mechanical strain and then an electrical signal. We investigate the behavior of each system under different conditions experimentally, numerically, or theoretically. We also show that the coupled interaction between fluid and the soft film plays a critical role in the shape of deformation and consequently in the functionality of the mechanism. We first embed a buckled thin film in a fluid channel within a soft device. By applying a mechanical strain to the device, we show both experimentally and numerically that the height of the buckled film changes accordingly as does the flow rate. We then offer an analytical solution by extending the classical lubrication theory to higher-order terms as a means to more accurately describe the flow in a channel with a buckled thin film, and in general, the flow in channels with any constrictions provided the Reynolds number is low. Next, we use an electrical signal to make a confined dielectric film undergo out-of-plane buckling deformation. The thin film is sandwiched between two flexible electrodes and the mechanism is implemented in a microfluidic device to pump the fluid into a micro channel. We show that the critical buckling voltage at which the thin film buckles out of the plane is mainly a function of voltage while the shape of deformation and so the functionality of this mechanism depend considerably on the applied boundary conditions. Finally, we enhance the fluid-soft structure response of the actuating mechanism by substituting flexible electrodes with fluid electrodes, resulting in a significant increase in the actuation frequency as well as a reduction in the critical buckling voltage.
  • Thumbnail Image
    Buckling of Dielectric Elastomeric Plates for Soft, Electrically Active Microfluidic Pumps
    Tavakol, Behrouz; Bozlar, Michael; Punckt, Christian; Froehlicher, Guillaume; Stone, Howard A.; Aksay, Ilhan A.; Holmes, Douglas P. (The Royal Society of Chemistry, 2014-05-15)
    Elastic instabilities, when properly implemented within soft, mechanical structures, can generate advanced functionality. In this work, we use the voltage-induced buckling of thin, flexible plates to pump fluids within a microfluidic channel. The soft electrodes that enable electrical actuation are compatible with fluids, and undergo large, reversible deformations. We quantified the onset of voltage-induced buckling, and measured the flow rate within the microchannel. This embeddable, flexible microfluidic pump will aid in the generation of new stand-alone microfluidic devices that require a tunable flow rate.
  • Thumbnail Image
    Control and Manipulation of Microfluidic Flow via Elastic Deformations
    Holmes, Douglas P.; Tavakol, Behrouz; Froehlicher, Guillaume; Stone, Howard A. (The Royal Society of Chemistry, 2013-05-08)
    We utilize elastic deformations via mechanical actuation to control and direct fluid flow within a flexible microfluidic device. The device consists of a microchannel with a flexible arch prepared by the buckling of a thin elastic film. The deflection of the arch can be predicted and controlled using the classical theory of Euler buckling. The fluid flow rate is then controlled by coupling the elastic deformation of the arch to the gap within the microchannel, and the results compared well with analytical predictions from a perturbation calculation and numerical simulations. We demonstrate that placement of these flexible valves in series enables directed flow towards regions of externally applied mechanical stress. The simplicity of the experimental approach provides a general design for advanced functionality in portable microfluidics, self-healing devices, and in situ diagnostics.