VTechWorks staff will be away for the Thanksgiving holiday beginning at noon on Wednesday, November 27, through Friday, November 29. We will resume normal operations on Monday, December 2. Thank you for your patience.

Browsing by Author "Vijayaraghavan, S."

Now showing 1 - 2 of 2
  • Thumbnail Image
    Defect assistant band alignment transition from staggered to broken gap in mixed As/Sb tunnel field effect transistor heterostructure
    Zhu, Yizheng; Jain, Nikhil; Vijayaraghavan, S.; Mohata, Dheeraj K.; Datta, Suman; Lubyshev, Dmitri; Fastenau, Joel M.; Liu, Amy K.; Monsegue, Niven; Hudait, Mantu K. (American Institute of Physics, 2012-11-01)
    The compositional dependence of effective tunneling barrier height (E-beff) and defect assisted band alignment transition from staggered gap to broken gap in GaAsSb/InGaAs n-channel tunnel field effect transistor (TFET) structures were demonstrated by x-ray photoelectron spectroscopy (XPS). High-resolution x-ray diffraction measurements revealed that the active layers are internally lattice matched. The evolution of defect properties was evaluated using cross-sectional transmission electron microscopy. The defect density at the source/channel heterointerface was controlled by changing the interface properties during growth. By increasing indium (In) and antimony (Sb) alloy compositions from 65% to 70% in InxGa1-xAs and 60% to 65% in GaAs1-ySby layers, the E-beff was reduced from 0.30 eV to 0.21 eV, respectively, with the low defect density at the source/channel heterointerface. The transfer characteristics of the fabricated TFET device with an E-beff of 0.21eV show 2x improvement in ON-state current compared to the device with E-beff of 0.30 eV. On contrary, the value of E-beff was decreased from 0.21 eV to -0.03 eV due to the presence of high defect density at the GaAs0.35Sb0.65/In0.7Ga0.3As heterointerface. As a result, the band alignment was converted from staggered gap to broken gap, which leads to 4 orders of magnitude increase in OFF-state leakage current. Therefore, a high quality source/channel interface with a properly selected E-beff and well maintained low defect density is necessary to obtain both high ON-state current and low OFF-state leakage in a mixed As/Sb TFET structure for high-performance and lower-power logic applications. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4764880]
  • Thumbnail Image
    Role of InAs and GaAs terminated heterointerfaces at source/channel on the mixed As-Sb staggered gap tunnel field effect transistor structures grown by molecular beam epitaxy
    Zhu, Yizheng; Jain, Nikhil; Vijayaraghavan, S.; Mohata, Dheeraj K.; Datta, Suman; Lubyshev, Dmitri; Fastenau, Joel M.; Liu, W. K.; Monsegue, Niven; Hudait, Mantu K. (American Institute of Physics, 2012-07-15)
    The structural, morphological, defect properties, and OFF state leakage current mechanism of mixed As-Sb type-II staggered gap GaAs-like and InAs-like interface heterostructure tunnel field effect transistors (TFETs) grown on InP substrates using linearly graded InxAl1-xAs buffer by molecular beam epitaxy are investigated and compared. Symmetric relaxation of >90% and >75% in the two orthogonal < 110 > directions with minimal lattice tilt was observed for the terminal GaAs0.35Sb0.65 and In0.7Ga0.3As active layers of GaAs-like and InAs-like interface TFET structures, respectively, indicating that nearly equal numbers of alpha and beta dislocations were formed during the relaxation process. Atomic force microscopy reveals extremely ordered crosshatch morphology and low root mean square roughness of similar to 3.17 nm for the InAs-like interface TFET structure compared to the GaAs-like interface TFET structure of similar to 4.46 nm at the same degree of lattice mismatch with respect to the InP substrates. The GaAs-like interface exhibited higher dislocation density, as observed by cross-sectional transmission electron microscopy, resulting in the elongation of reciprocal lattice point of In0.7Ga0.3As channel and drain layers in the reciprocal space maps, while the InAs-like interface creates a defect-free interface for the pseudomorphic growth of the In0.7Ga0.3As channel and drain layers with minimal elongation along the Delta omega direction. The impact of the structural differences between the two interface types on metamorphic TFET devices was demonstrated by comparing p(+)-i-n(+) leakage current of identical TFET devices that were fabricated using GaAs-like and InAs-like interface TFET structures. Higher OFF state leakage current dominated by band-to-band tunneling process due to higher degree of defects and dislocations was observed in GaAs-like interface compared to InAs-like interface where type-II staggered band alignment was well maintained. Significantly lower OFF state leakage current dominated by the field enhanced Shockley-Read-Hall generation-recombination process at different temperatures was observed in InAs-like TFET structure. The fixed positive charge at the source/channel heterointerface influences the band lineup substantially with charge density greater than 1 x 10(12)/cm(2) and the band alignment is converted from staggered gap to broken gap at similar to 6 x 10(12)/cm(2). Clearly, InAs-like interface TFET structure exhibited 4x lower OFF state leakage current, which is attributed primarily to the impact of the layer roughness, defect properties on the carrier recombination rate, suggesting great promise for metamorphic TFET devices for high-performance, and ultra-low power applications. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4737462]