Browsing by Author "Yang, Shuo"

Now showing 1 - 5 of 5
  • Thumbnail Image
    Application of Sapphire-Fiber-Bragg-Grating-Based Multi-Point Temperature Sensor in Boilers at a Commercial Power Plant
    Yang, Shuo; Homa, Daniel S.; Heyl, Hanna; Theis, Logan; Beach, John; Dudding, Billy; Acord, Glen; Taylor, Dwyn; Pickrell, Gary R.; Wang, Anbo (MDPI, 2019-07-21)
    Readily available temperature sensing in boilers is necessary to improve efficiencies, minimize downtime, and reduce toxic emissions for a power plant. The current techniques are typically deployed as a single-point measurement and are primarily used for detection and prevention of catastrophic events due to the harsh environment. In this work, a multi-point temperature sensor based on wavelength-multiplexed sapphire fiber Bragg gratings (SFBGs) were fabricated via the point-by-point method with a femtosecond laser. The sensor was packaged and calibrated in the lab, including thermally equilibrating at 1200 °C, followed by a 110-h, 1000 °C stability test. After laboratory testing, the sensor system was deployed in both a commercial coal-fired and a gas-fired boiler for 42 days and 48 days, respectively. The performance of the sensor was consistent during the entire test duration, over the course of which it measured temperatures up to 950 °C (with some excursions over 1000 °C), showing the survivability of the sensor in a field environment. The sensor has a demonstrated measurement range from room temperature to 1200 °C, but the maximum temperature limit is expected to be up to 1900 °C, based on previous work with other sapphire based temperature sensors.
  • Thumbnail Image
    Dissolution and Diffusion-Based Reactions within YBa2Cu3O7-x Glass Fibers
    Heyl, Hanna; Yang, Shuo; Homa, Daniel S.; Slebodnick, Carla; Wang, Anbo; Pickrell, Gary R. (MDPI, 2019-12-20)
    This work presents a thorough identification and analysis of the dissolution and diffusion-based reaction processes that occur during the drawing of YBa2Cu3O7-x (YBCO) glass-clad fibers, using the molten-core approach, on a fiber draw tower in vacuum and in oxygen atmospheres. The results identify the dissolution of the fused silica cladding and the subsequent diffusion of silicon and oxygen into the molten YBCO core. This leads to a phase separation due to a miscibility gap which occurs in the YBCO–SiO2 system. Due to this phase separation, silica-rich precipitations form upon quenching. XRD analyses reveal that the core of the vacuum as-drawn YBCO fiber is amorphous. Heat-treatments of the vacuum as-drawn fibers in the 800–1200 °C range show that cuprite crystallizes out of the amorphous matrix by 800 °C, followed by cristobalite by 900 °C. Heat-treatments at 1100 °C and 1200 °C lead to the formation of barium copper and yttrium barium silicates. These results provide a fundamental understanding of phase relations in the YBCO–SiO2 glass-clad system as well as indispensable insights covering general glass-clad fibers drawn using the molten-core approach.
  • Thumbnail Image
    Femtosecond-Laser-Enabled Fiber-Optic Interferometric Devices
    Yang, Shuo (Virginia Tech, 2020-11-11)
    During the past decades, femtosecond laser micro-fabrication has gained growing interests owing to its several unique features including direct and maskless fabrication, flexible choice of materials and geometries, and truly three-dimensional fabrication. Moreover, fiber-optic sensors have demonstrated distinct advantages over traditional electrical sensors such as the immunity to electromagnetic interference, miniature footprint, robust performance, and high sensitivity. Therefore, the marriage between femtosecond laser micro-fabrication and optical fibers have enabled and will continue to offer vast opportunities to create novel structures for sensing applications. This dissertation focuses on design, fabrication and characterization of optical-fiber based interferometric devices for sensing applications. Three novel devices have been proposed and realized, including point-damage-based Fiber Bragg gratings in single-crystal sapphire fibers, all-sapphire fiber-tip Fabry-Pérot cavity, and in-fiber Whispering-Gallery mode resonator
  • Thumbnail Image
    Powder-in-Tube Reactive Molten-Core Fabrication of Glass-Clad BaO-TiO2-SiO2 Glass–Ceramic Fibers
    Yang, Shuo; Heyl, Hanna; Homa, Daniel S.; Pickrell, Gary R.; Wang, Anbo (MDPI, 2020-01-15)
    In this paper we report the fabrication of glass-clad BaO-TiO2-SiO2 (BTS) glass–ceramic fibers by powder-in-tube reactive molten-core drawing and successive isothermal heat treatment. Upon drawing, the inserted raw powder materials in the fused silica tubing melt and react with the fused silica tubing (housing tubing) via dissolution and diffusion interactions. During the drawing process, the fused silica tubing not only serves as a reactive crucible, but also as a fiber cladding layer. The formation of the BTS glass–ceramic structure in the core was verified by micro-Raman spectroscopy after the successive isothermal heat treatment. Second-harmonic generation and blue-white photoluminescence were observed in the fiber using 1064 nm and 266 nm picosecond laser irradiation, respectively. Therefore, the BTS glass–ceramic fiber is a promising candidate for all fiber based second-order nonlinear and photoluminescence applications. Moreover, the powder-in-tube reactive molten core method offers a more efficient and intrinsic contamination-free approach to fabricate glass–ceramic fibers.
  • Thumbnail Image
    Spatially expandable fiber-based probes as a multifunctional deep brain interface
    Jiang, Shan; Patel, Dipan C.; Kim, Jongwoon; Yang, Shuo; Mills, William A. II; Zhang, Yujing; Wang, Kaiwen; Feng, Ziang; Vijayan, Sujith; Cai, Wenjun; Wang, Anbo; Guo, Yuanyuan; Kimbrough, Ian F.; Sontheimer, Harald; Jia, Xiaoting (Nature Research, 2020)
    Understanding the cytoarchitecture and wiring of the brain requires improved methods to record and stimulate large groups of neurons with cellular specificity. This requires miniaturized neural interfaces that integrate into brain tissue without altering its properties. Existing neural interface technologies have been shown to provide high-resolution electrophysiological recording with high signal-to-noise ratio. However, with single implantation, the physical properties of these devices limit their access to one, small brain region. To overcome this limitation, we developed a platform that provides three-dimensional coverage of brain tissue through multisite multifunctional fiber-based neural probes guided in a helical scaffold. Chronic recordings from the spatially expandable fiber probes demonstrate the ability of these fiber probes capturing brain activities with a single-unit resolution for long observation times. Furthermore, using Thy1-ChR2-YFP mice we demonstrate the application of our probes in simultaneous recording and optical/chemical modulation of brain activities across distant regions. Similarly, varying electrographic brain activities from different brain regions were detected by our customizable probes in a mouse model of epilepsy, suggesting the potential of using these probes for the investigation of brain disorders such as epilepsy. Ultimately, this technique enables three-dimensional manipulation and mapping of brain activities across distant regions in the deep brain with minimal tissue damage, which can bring new insights for deciphering complex brain functions and dynamics in the near future.