Browsing by Author "Yilmaz, Deniz"

Now showing 1 - 4 of 4
  • Thumbnail Image
    BEST-WR: An adapted algorithm for the hydraulic characterization of hydrophilic and water-repellent soils
    Di Prima, Simone; Stewart, Ryan D.; Abou Najm, Majdi R.; Ribeiro Roder, Ludmila; Giadrossich, Filippo; Campus, Sergio; Angulo-Jaramillo, Rafael; Yilmaz, Deniz; Roggero, Pier Paolo; Pirastru, Mario; Lassabatere, Laurent (Elsevier, 2021-12-01)
    Water-repellent soils usually experience water flow impedance during the early stage of a wetting process followed by progressive increase of infiltration rate. Current infiltration models are not formulated to describe this peculiar process. Similarly, simplified methods of soil hydraulic characterization (e.g., BEST) are not equipped to handle water-repellent soils. Here, we present an adaptation of the BEST method, named BEST-WR, for the hydraulic characterization of soils at any stage of water-repellency. We modified the Haverkamp explicit transient infiltration model, included in BEST for modeling infiltration data, by embedding a scaling factor describing the rate of attenuation of infiltration rate due to water repellency. The new model was validated using analytically generated data, involving soils with different texture and a dataset that included data from 60 single-ring infiltration tests. The scaling factor was used as a new index to assess soil water repellency in a Mediterranean wooded grassland, where the scattered evergreen oak trees induced more noticeable water repellency under the canopies as compared to the open spaces. The new index produced results in line with those obtained using the water drop penetration time test, which is one of the most widely test applied for quantifying soil water repellency persistence. Finally, we used BEST-WR to determine the hydraulic characteristic curves under both hydrophilic and hydrophobic conditions.
  • Thumbnail Image
    Mixed formulation for an easy and robust numerical computation of sorptivity
    Lassabatere, Laurent; Peyneau, Pierre-Emmanuel; Yilmaz, Deniz; Pollacco, Joseph; Fernandez-Galvez, Jesus; Latorre, Borja; Moret-Fernandez, David; Di Prima, Simone; Rahmati, Mehdi; Stewart, Ryan D.; Abou Najm, Majdi; Hammecker, Claude; Angulo-Jaramillo, Rafael (Copernicus, 2023-02-24)
    Sorptivity is one of the most important parameters for the quantification of water infiltration into soils. proposed a specific formulation to derive sorptivity as a function of the soil water retention and hydraulic conductivity functions, as well as initial and final soil water contents. However, this formulation requires the integration of a function involving hydraulic diffusivity, which may be undefined or present numerical difficulties that cause numerical misestimations. In this study, we propose a mixed formulation that scales sorptivity and splits the integrals into two parts: the first term involves the scaled degree of saturation, while the second involves the scaled water pressure head. The new mixed formulation is shown to be robust and well-suited to any type of hydraulic function - even with infinite hydraulic diffusivity or positive air-entry water pressure heads - and any boundary condition, including infinite initial water pressure head, h -> -infinity. Lastly, we show the benefits of using the proposed formulation for modeling water into soil with analytical models that use sorptivity.
  • Thumbnail Image
    A scaling procedure for straightforward computation of sorptivity
    Lassabatere, Laurent; Peyneau, Pierre-Emmanuel; Yilmaz, Deniz; Pollacco, Joseph; Fernández-Gálvez, Jesús; Latorre, Borja; Moret-Fernández, David; Di Prima, Simone; Rahmati, Mehdi; Stewart, Ryan D.; Abou Najm, Majdi R.; Hammecker, Claude; Angulo-Jaramillo, Rafael (Copernicus, 2021-09-22)
    Sorptivity is a parameter of primary importance in the study of unsaturated flow in soils. This hydraulic parameter is required to model water infiltration into vertical soil profiles. Sorptivity can be directly estimated from the soil hydraulic functions (water retention and hydraulic conductivity curves), using the integral formulation of . However, calculating sorptivity in this manner requires the prior determination of the soil hydraulic diffusivity and its numerical integration between initial and final saturation degrees, which may be difficult in some situations (e.g., coarse soil with diffusivity functions that are quasi-infinite close to saturation). In this paper, we present a procedure to compute sorptivity using a scaling parameter, cp, that corresponds to the sorptivity of a unit soil (i.e., unit values for all parameters and zero residual water content) that is utterly dry at the initial state and saturated at the final state. The cp parameter was computed numerically and analytically for five hydraulic models: Delta (i.e., Green and Ampt), Brooks and Corey, van Genuchten-Mualem, van Genuchten-Burdine, and Kosugi. Based on the results, we proposed brand new analytical expressions for some of the models and validated previous formulations for the other models. We also tabulated the output values so that they can easily be used to determine the actual sorptivity value for any case. At the same time, our numerical results showed that the relation between cp and the hydraulic shape parameters strongly depends on the chosen model. These results highlight the need for careful selection of the proper model for the description of the water retention and hydraulic conductivity functions when estimating sorptivity.
  • Three-term formulation to describe infiltration in water-repellent soils
    Yilmaz, Deniz; Di Prima, Simone; Stewart, Ryan D.; Abou Najm, Majdi R.; Fernandez-Moret, David; Latorre, Borja; Lassabatere, Laurent (Elsevier, 2022-12-01)
    Modeling infiltration in water-repellent soils is difficult, as the underlying processes remain poorly quantified. However, recent work has adapted the Beerkan Soil Transfer Parameter (BEST) algorithm to include an exponential correction term for characterizing these types of soils. The original BEST-WR (WR = Water Repellent) method used a two-term approximate expansion of the Haverkamp quasi-exact implicit model. However, the BEST-WR method can have considerable inaccuracy, particularly as the time of infiltration and the soil water repellency increase. Here, we extended the BEST-WR model by adapting a three-term approximation of the Haverkamp quasi-exact implicit model to water-repellent soils. We then tested the new method using analytical data. For highly water-repellent soils, the proposed method had better performance when estimating soil sorptivity (S) and soil saturated conductivity (Ks), with respective errors of less than 1.5 % and 8 %, compared to relative errors of more than 10 % and 30 % with the two-term BEST-WR method. We also tested both approaches with experimental data. The two methods provided similar estimates for hydraulic parameters, with linear correlations between methods of R2 = 0.84 for S and R2 = 0.88 for Ks. Initial infiltration was not well modeled by either the two-term or three-term model for 33 tests, thus revealing limitations in the applied exponential model that we used to account for soil repellency. Nonetheless, the proposed three-term expression provided better fits than the two-term model for most of the infiltration runs, meaning that this new approach is more robust when modeling infiltration processes in water-repellent soils.