Search
Now showing items 1-10 of 12
The mechanism of corrosion of cadmium-silver-copper bearing alloys
(Virginia Agricultural and Mechanical College and Polytechnic Institute, 1937)
Tests were made at the Lubrication Laboratory at Virginia Polytechnic Institute to determine the mechanism of corrosion of Cadmium-Silver-Copper bearing metals, and if possible to develop a procedure to quantitatively rate ...
Cellulose xanthate: chemistry, manufacture, and possibilities for use in ore flotation
(Virginia Tech, 1934-06-01)
see document
Corrosion of alloys by crude fatty acids at high temperatures
(Virginia Tech, 1939-06-05)
<p>This investigation was undertaken in order to determine the
effect of alloying on the corrodibility of various alloys to hot
crude tallol.</p>
The effect of time and temperature of burning upon the properties of hydromagnesite
(Virginia Agricultural and Mechanical College and Polytechnic Institute, 1934)
Effect of service on automobile crankcase oils
(Virginia Agricultural and Mechanical College and Polytechnic Institute, 1935)
Design characteristics for byproduct fatty acid recovery
(Virginia Agricultural and Mechanical College and Polytechnic Institute, 1937)
This investigation was undertaken in order to determine the characteristics of crude fatty acids, recovered from the resin soap wastes of kraft pulp manufacture, so that efficient distillation units may be designed for ...
Beryllium analysis
(Virginia Agricultural and Mechanical College and Polytechnic Institute, 1934)
The two Topaz samples do not contain Be, as was shown by the absence of characteristic beryllium lines in the ultraviolet spectrum of these minerals,
The sample of Beryl probably containers 10% or less BeO, instead of ...
The drying and curing of yellow leaf tobacco by air conditioning methods
(Virginia Agricultural and Mechanical College and Polytechnic Institute, 1939)
The flue curing process for tobacco is practiced today in nearly the same manner as when tobacco first became of commercial importance, with no definite procedure being followed. A scientific study has proved that the ...
Drying and ripening of soybeans for benefication of soybean products
(Virginia Agricultural and Mechanical College and Polytechnic Institute, 1938)
The object of this investigation was to ripen and dry soybeans in such a way as to prevent the formation of bad taste and odor in the oil.
Field run soybeans were treated in specially constructed gas-tight silos through ...
Size reduction characteristics of an experimental swing hammermill
(Virginia Agricultural and Mechanical College and Polytechnic Institute, 1939)
Size-reduction of materials is an important operation in many chemical industries. The purpose of size-reduction are: (a) for specific mesh size product; (b) grinding for release, or unlocking grinding for purposes of ...