VTechWorks staff will be away for the Thanksgiving holiday beginning at noon on Wednesday, November 27, through Friday, November 29. We will resume normal operations on Monday, December 2. Thank you for your patience.
 

Theoretical analysis of the intrinsic magnetic noise spectral density of magnetostrictive-piezoelectric laminated composites

Abstract

The equivalent magnetic noise spectral density level for long type magnetostrictive-piezoelectric laminated composites has been investigated by using a 1D equivalent circuit model, and exemplified for a longitudinal-transverse mode. The theoretical developments explain well our experimental results. The findings show that similar ultimate magnetic noise spectral noise density can be expected whether using either charge or voltage amplifier detection methods. The findings show that a volume effect and the dielectric loss factor of the piezoelectric layer are the dominant sources of the noise floor. Our findings show that the noise scales as 1/root f. The lowest equivalent noise floor value that has been observed is 10/root f pT/root Hz for f << 10 kHz, with a white noise level of 100 fT/root Hz above 10 kHz. (C) 2011 American Institute of Physics. [doi:10.1063/1.3594714]

Description

Keywords

Amplifiers, Magnetic sensors, 1/f noise, Laminates, Piezoelectric films

Citation

Zhuang, X., Cordier, C., Saez, S., Sing, M. Lam Chok, Dolabdjian, C., Gao, J., Li, J. F., Viehland, D. (2011). Theoretical analysis of the intrinsic magnetic noise spectral density of magnetostrictive-piezoelectric laminated composites. Journal of Applied Physics, 109(12). doi: 10.1063/1.3594714