VTechWorks staff will be away for the winter holidays starting Tuesday, December 24, 2024, through Wednesday, January 1, 2025, and will not be replying to requests during this time. Thank you for your patience, and happy holidays!

College of Architecture, Arts, and Design (CAAD)

Permanent URI for this community

https://hdl.handle.net/10919/5538
Note that the School of Public and International Affairs (SPIA) is now located in the College of Liberal Arts and Human Sciences.

Browse

Browsing College of Architecture, Arts, and Design (CAAD) by Author "Al-Radaideh, Tamer"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Quantifying CO2 Emissions and Energy Production from Power Plants to Run HVAC Systems in ASHRAE-Based Buildings
    Alrebei, Odi Fawwaz; Obeidat, Bushra; Al-Radaideh, Tamer; Le Page, Laurent M.; Hewlett, Sally; Al Assaf, Anwar H.; Amhamed, Abdulkarem I. (MDPI, 2022-11-22)
    Recent evidence available in the literature has highlighted that the high-energy consumption rate associated with air conditioning leads to the undesired “overcooling” condition in arid-climate regions. To this end, this study quantified the effects of increasing the cooling setpoint temperature on reducing energy consumption and CO2 emissions to mitigate overcooling. DesignBuilder software was used to simulate the performance of a generic building operating under the currently adopted ASHRAE HVAC criteria. It was found that increasing the cooling setpoint temperature by 1 °C will increase the operative temperature by approximately 0.25 °C and reduce the annual cooling electricity consumption required for each 1 m2 of an occupied area by approximately 8 kWh/year. This accounts for a reduction of 8% in cooling energy consumption compared to the ASHRAE cooling setpoint (i.e., t_s = 26 °C) and a reduction in the annual CO2 emission rate to roughly 4.8 kg/m2 °C. The largest reduction in cooling energy consumption and CO2 emissions was found to occur in October, with reduced rates of approximately–1.3 kWh/m2 °C and −0.8 kg/m2 °C, respectively.
  • Thumbnail Image
    Quantifying Energy Reduction and Thermal Comfort for a Residential Building Ventilated with a Window-Windcatcher: A Case Study
    Nouh Ma’bdeh, Shouib; Fawwaz Alrebei, Odi; Obeidat, Laith M.; Al-Radaideh, Tamer; Kaouri, Katerina; Amhamed, Abdulkarem I. (MDPI, 2022-12-29)
    Previous studies on window-windcatchers have shown their effectiveness in capturing the prevailing wind and redirecting it into a building, increasing the actual-to-required ventilation ratio by 9%, above what is required by the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). However, the effect of implementing the proposed system on energy performance, energy costs, and thermal comfort has not been studied. Therefore, here, we investigate and test the implementation of the window-windcatcher on a typical residential building, using a validated DesignBuilder model. Compared to the base case (no window-windcatcher), the total annual energy consumption of the entire building (Etot,b), and consequently the cost, is reduced by approximately 23.3% (i.e., from 18,143 kWh/year to 13,911 kWh/year) when using the window-windcatcher. The total annual reduction in thermal discomfort hours is estimated to be 290 h, which corresponds to an average monthly reduction of approximately 24 h.