Browsing by Author "Abiade, Jeremiah T."
Now showing 1 - 10 of 10
Results Per Page
Sort Options
- Barium Titanate-Based Magnetoelectric NanocompositesYang, Yaodong (Virginia Tech, 2011-06-21)Barium Titanate (BaTiO3 or BTO) has attracted an ever increasing research interest because of its wide range of potential applications. Nano-sized or nanostructured BTO has found applications in new, useful smart devices, such as sensors and piezoelectric devices. Not only limited to one material, multi-layers or multi-phases can lead to multifunctional applications; for example, nanocomposites can be fabricated with ferrite or metal phase with BTO. In this study, I synthesized various BTO-ferrites, ranging from nanoparticles, nanowires to thin films. BTO-ferrite coaxial nanotubes, BTO-ferrite self-assemble thin films, and BTO single phase films were prepared by pulsed laser deposition (PLD) and sol-gel process. BTO-ferrite nanocomposites were grown by solid state reaction. Furthermore, BTO-metal nanostructures were also synthesized by solid state reaction under hydrogen gas which gave us a great inspiration to fabricate metal-ceramic composites. To understand the relationship between metal and BTO ceramic phase, I also deposited BTO film on Au buffered substrates. A metal layer can affect the grain size and orientation in BTO film which can further help us to control the distribution of dielectric properties of BTO films. After obtaining different nanomaterials, I am interested in the applications of these materials. Recently, many interesting electric devices are developed based on nanotechnology, e.g.: memristor. Memristor is a resistor with memory, which is very important in the computer memory. I believe these newly-synthesized BTO based nanostructures are useful for development of memristor, sensors and other devices to fit increasing needs.
- The effect of matrix and substrate on the coercivity and blocking temperature of self-assembled Ni nanoparticlesAbiade, Jeremiah T.; Oh, Sang Ho; Kumar, Dhananjay; Varela, Maria; Pennycook, Stephen J.; Guo, Haizhong; Gupta, Arunava; Sankar, Jagannathan (American Institute of Physics, 2008-10-01)We have shown that the magnetic properties of nanoparticles may be tuned from superparamagnetic to ferromagnetic by changing the substrate or thin film matrix in which they are embedded. Nickel nanoparticles were embedded into alumina, titanium nitride, and cerium oxide matrices on both silicon and sapphire substrates via pulsed laser deposition. The laser ablation time on the nickel target was kept constant. Only nickel nanoparticles in cerium oxide showed characteristics of ferromagnetism (room temperature coercivity and remanence). Ni nanoparticles, in either alumina or titanium nitride, possessed blocking temperatures below 200 K. Detailed scanning transmission electron microscopy analysis has been conducted on the samples embedded into cerium oxide on both substrates and related to the magnetic data. (c) 2008 American Institute of Physics.
- Effect of spacer layer thickness on magnetic interactions in self-assembled single domain iron nanoparticlesHerndon, Nichole B.; Oh, Sang Ho; Abiade, Jeremiah T.; Pai, Devdas; Sankar, Jag; Pennycook, Stephen J.; Kumar, Dhananjay (American Institute of Physics, 2008-04-01)The magnetic characteristics of iron nanoparticles embedded in an alumina thin film matrix have been studied as a function of spacer layer thickness. Alumina as well as iron nanoparticles were deposited in a multilayered geometry using sequential pulsed laser deposition. The role of spacer layer thickness was investigated by making layered thin film composites with three different spacer layer thicknesses (6, 12, and 18 nm) with fixed iron particle size of similar to 13 nm. Intralayer magnetic interactions being the same in each sample, the variation in coercivity and saturation magnetization is attributed to thickness dependent interlayer magnetic interactions of three types: exchange, strong dipolar, and weak dipolar. A thin film composite multilayer structure offers a continuously tunable strength of interparticle dipole-dipole interaction and is thus well suited for studies of the influence of interaction on the magnetic properties of small magnetic particle systems.
- Investigation of the Magnetic Properties of Non-Thiolated Au Nano-Structures Grown by Laser AblationZhao, Chenlin (Virginia Tech, 2014-09-09)Although it is known that gold (Au) is diamagnetic in bulk form, it has been reported that Au displays magnetic properties when reduced to the nano-scale. Researchers found magnetism in Au nanoparticles (NPs) in a size range from 2 to 10 nanometers. Moreover, the Au nanoparticles are usually coated by thiol-containing organic caps, which are believed to be responsible for the magnetism. However, others suggest that organic capping is not necessary to observe magnetism in Au NPs, and magnetism may be an intrinsic property for nano-structured gold. For this investigation, we used pulsed laser deposition to prepare nano-structured gold of different sizes and concentrations to investigate the magnetic properties. Our experiment results confirmed that for the samples in which Au is in the metallic state as nanoparticles with ~5 nm diameter, as well as inthe alloy form, bonded with indium, the samples show ferromagnetism when embedded in an Al2O3 matrix without any thiol-containing organic capping. Our results suggest that ferromagnetism is an intrinsic property of Au nano-structures, which means that it is not necessary to incorporate Au-S bonds with organic coatings in order to observe this phenomenon. We believe due to the significant broken symmetry at the surface of the nanoparticles, holes are generated in d bands of the surface Au atoms. These holes are most possibly responsible for ferromagnetism in Au nanoparticles. The realization of magnetism in Au coupled with the lack of clear understanding of its origin makes the investigation of magnetism of diamagnetic metals ripe for further inquiry.
- A Nanoengineering Approach to Oxide Thermoelectrics For Energy Harvesting ApplicationsOsborne, Daniel Josiah (Virginia Tech, 2010-12-03)The ability of uniquely functional thermoelectric materials to convert waste heat directly into electricity is critical considering the global energy economy. Profitable, energy-efficient thermoelectrics possess thermoelectric figures of merit ZT ≥ 1. We examined the effect of metal nanoparticle – oxide film interfaces on the thermal conductivity κ and Seebeck coefficient α in bilayer and multilayer thin film oxide thermoelectrics in an effort to improve the dimensionless figure of merit ZT. Since a thermoelectric's figure of merit ZT is inversely proportional to κ and directly proportional to α, reducing κ and increasing α are key strategies to optimize ZT. We aim to reduce κ by phonon scattering due to the inclusion of metal nanoparticles in the bulk of thermoelectric thin films deposited by Pulsed Laser Deposition. XRD, AFM, XPS, and TEM analyses were carried out for structural and compositional characterization. The electrical conductivities of the samples were measured by a four-point probe apparatus. The Seebeck coefficients were measured in-plane, varying the temperature from 100K to 310K. The thermal conductivities were measured at room temperature using Time Domain Thermoreflectance.
- Smart material composites for magnetic field and force sensorsKarmarkar, Makarand Anand (Virginia Tech, 2008-07-25)Piezoelectric material based sensors are widely used in applications such as automobiles, aircraft, and industrial systems. In past decade, attention has been focused on synthesizing composites that can provide multifunctional properties, i.e., same material exhibits two or more properties. In this group of composites, magnetoelectric materials are particularly interesting as they provide the opportunity of coupling magnetic and electric field. Another class of composite materials that are being actively pursued is piezoresistive materials. Piezoresistivity refers to change in resistance with applied stress and these materials are promising for enhancing the sensitivity of current generation pressure sensors based on silicon. In this study, we focus on two composites systems: ferrite / Terfenol-D / nickel — lead zirconate titanate (magnetoelectric); and lanthanum strontium manganate (LSMO) — carbon nanotube (CNT) – silicon carbonitride (SiCN) (piezoresistive). Recently, Islam et al. have reported a magnetic field sensor based on a piezoelectric transformer with a ring- dot electrode pattern. In this thesis, this design was further investigated by synthesizing Terfenol-D / PZT laminate. The fabricated sensor design consists of a ring-dot piezoelectric transformer laminated to a magnetostrictive disc and its working principle is as follows: When a constant voltage is applied to the ring section of the piezoelectric layer at resonance, a stress is induced in the dot section. Then, if an external magnetic object is introduced in the vicinity of the dot section, the effective elastic stiffness is increased, altering the resonance frequency (fr). The variation of resonance frequency and magnitude of output voltage with applied magnetic field was characterized and analyzed to determine the sensitivity. The sensor showed a shift of ~1.36Hz/Oe over the frequency range of 137.4
- Study of Seal Glass for Solid Oxide Fuel/Electrolyzer CellsMahapatra, Manoj Kumar (Virginia Tech, 2009-12-02)Seal glass is essential and plays a crucial role in solid oxide fuel/electrolyzer cell performance and durability. A seal glass should have a combination of thermal, chemical, mechanical, and electrical properties in order to seal different cell components and stacks and prevent gas leakage. All the desired properties can simultaneously be obtained in a seal glass by suitable compositional design. In this dissertation, SrO-La₂O₃-A₂O₃-B₂O₃3-SiO₂ based seal glasses have been developed and composition-structure-property relationships have been investigated. B₂O₃ free SrO-La₂O₃-Al₂O₃-SiO₂ based seal glass is the most suitable and its compatibility with the metallic interconnects and sealing performances have been evaluated. A seal glass should be stable for 5,000-40,000 hrs in the oxidizing and reducing atmospheres at 600-900°C but both the thermal and chemical stability is a persistent problem. The effect of Al₂O₃ on a SrO-La₂O₃-Al₂O₃-B₂O₃-SiO₂ based seal glass has been studied to improve the thermal properties, such as glass transition temperature, softening temperature and thermal expansion coefficient, and the thermal stability. Al₂O₃ improves the thermal stability but does not significantly affect the thermal properties of the seal glass. Comprehensive understanding of composition-structure-property relationships is needed to design a suitable seal glass. The thermal properties and stability of a borosilicate seal glass depend on the B2O3:SiO2 ratio in the composition. The role of B₂O₃:SiO₂ ratio on the glass network structure of the SrO-La₂O₃-Al₂O₃-B₂O₃-SiO₂ based seal glasses has been studied using Raman spectroscopy and nuclear magneto resonance spectroscopy. The thermal properties and thermal stability were correlated with the glass network structure and the calculated network connectivity. This study shows that the thermal properties degrade with increasing B₂O₃:SiO₂ ratio due to increase in the non-bridging oxygen and decrease in the network connectivity. High B₂O₃:SiO₂ ratio induces BO4 and SiO4 structural unit ordering, increases micro-heterogeneity, and subsequently degrades thermal stability. B₂O₃ free SrO-La₂O₃-Al₂O₃-SiO₂ seal glass shows the best combination of the thermal properties and thermal stability among the studied glasses. Nickel or nickel oxide is added into a seal glass to modify the thermal properties depending on the specific composition. The role of nickel as a network former or modifier and its effect on the thermal properties and thermal stability of the SrO-La₂O₃-Al₂O₃-SiO₂ based seal glasses have been investigated. Nickel is a modifier in this glass system and does not improve the thermal properties but degrades thermal stability by decreasing network connectivity and inducing micro-heterogeneity. The interconnect-seal glass interface stability is the most crucial for solid oxide fuel/electrolyzer cell. Crofer 22 APU and AISI 441 alloys are the preferred interconnects. The interfacial stability of the SrO-La₂O₃-Al₂O₃-SiO₂ based seal glass with these alloys have been studied as a function of time (0-1000 hrs), temperature (700-850°C), atmospheres (air, argon, and H₂O/H₂) using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction analysis (XRD). Complementary analytical techniques such as wave length dispersive spectroscopy (WDS) and SEM of thin samples were also carried out for selected samples. This study shows good interfacial stability of the SrO-La₂O₃-Al₂O₃-SiO₂ based seal glass with these alloys for the studied conditions. A suitable seal glass should be hermetic and withstand 100-1000 thermal cycles for practical application. Sealing performances of the SrO-La2O3-Al2O3-SiO2 based seal glass have been evaluated by pressure-leakage method. The seal glass is hermetic for at least 2000 hrs and withstands 100 thermal cycles. Overall, present work shows that the SrO-La₂O₃-Al₂O₃-SiO₂ based glass has all the desired properties and suitable for solid oxide fuel/electrolyzer cell seal.
- Template Directed Growth of Nb doped SrTiO₃ using Pulsed Laser DepositionWaller, Gordon Henry (Virginia Tech, 2011-04-29)Oxide materials display a wide range of physical properties. Recently, doped complex oxides have drawn considerable attention for various applications including thermoelectrics. Doped complex oxide materials have high Seebeck coefficients (S) and electrical conductivities (o) comparable to other doped semiconductors but low thermoelectric figure of merit ZT values due to their poor thermal conductivities. For example, niobium doped strontium titanate (SrNbxTi1-xO₃ or simply Nb:STO) has a power factor comparable to that of bismuth telluride. Semiconductor nanostructures have demonstrated a decrease in thermal conductivity (κ) resulting in an increase in the thermoelectric figure of merit (ZT). Nanostructures of doped oxides like niobium doped strontium titanate, may also lead to decreased κ and a corresponding increase in ZT. The major impediment to nanostructured oxide thermoelectric materials is the lack of suitable fabrication techniques for testing and eventual use. Electron Beam Lithography (EBL) was used to pattern poly-methyl-methacrylate (PMMA) resists on undoped single crystalline SrTiO₃ (STO) substrates which were then filled with Nb:STO using Pulsed Laser Deposition (PLD) at room temperature. This technique produced nanowires and nanodots with critical dimensions below 100 nm, and a yield of approximately 95%. In addition to scanning electron microscopy and atomic force microscopy morphological studies of the patterned oxide, thin film analogues were used to study composition, crystallinity and electrical conductivity of the material in response to a post deposition heat treatment. Since the thin films were grown under similar experimental parameters as the oxide nanostructres, the patterned oxides are believed to be stoichiometric and highly crystalline. The study found that using a combination of EBL and PLD, it is possible to produce highly crystalline, doped complex oxide nanostructures with excellent control over morphology. Furthermore, the technique is applicable to nearly all materials and provides the capability of patterning doped oxide materials without the requirement of etching or multiple lithography steps makes this approach especially interesting for future fundamental materials research and novel device fabrication.
- Thermal conductivity and interface thermal conductance of amorphous and crystalline Zr47Cu31Al13Ni9 alloys with a Y2O3 coatingShukla, Nitin C.; Liao, Hao-Hsiang; Abiade, Jeremiah T.; Liu, F. X.; Liaw, P. K.; Huxtable, Scott T. (AIP Publishing, 2009-02-01)We examine the thermal conductivity k and interface thermal conductance G for amorphous and crystalline Zr47Cu31Al13Ni9 alloys in contact with polycrystalline Y2O3. Using time-domain thermoreflectance, we find k=4.5 W m(-1) K-1 for the amorphous metallic alloy of Zr47Cu31Al13Ni9 and k=5.0 W m(-1) K-1 for the crystalline Zr47Cu31Al13Ni9. We also measure G=23 MW m(-2) K-1 for the metallic glass/Y2O3 interface and G=26 MW m(-2) K-1 for the interface between the crystalline Zr47Cu31Al13Ni9 and Y2O3. The thermal conductivity of the crystalline Y2O3 layer is found to be k=5.0 W m(-1) K-1, and the conductances of Al/Y2O3 and Y2O3/Si interfaces are 68 and 45 MW m(-2) K-1, respectively.
- Thermal transport in composites of self-assembled nickel nanoparticles embedded in yttria stabilized zirconiaShukla, Nitin C.; Liao, Hao-Hsiang; Abiade, Jeremiah T.; Murayama, Mitsuhiro; Kumar, Dhananjay; Huxtable, Scott T. (AIP Publishing, 2009-04-01)We investigate the effect of nickel nanoparticle size on thermal transport in multilayer nanocomposites consisting of alternating layers of nickel nanoparticles and yttria stabilized zirconia (YSZ) spacer layers that are grown with pulsed laser deposition. Using time-domain thermoreflectance, we measure thermal conductivities of k=1.8, 2.4, 2.3, and 3.0 W m(-1) K(-1) for nanocomposites with nickel nanoparticle diameters of 7, 21, 24, and 38 nm, respectively, and k=2.5 W m(-1) K(-1) for a single 80 nm thick layer of YSZ. We use an effective medium theory to estimate the lower limits for interface thermal conductance G between the nickel nanoparticles and the YSZ matrix (G>170 MW m(-2) K(-1)), and nickel nanoparticle thermal conductivity.