VTechWorks staff will be away for the Thanksgiving holiday beginning at noon on Wednesday, November 27, through Friday, November 29. We will resume normal operations on Monday, December 2. Thank you for your patience.

Browsing by Author "Clark, Ian Andrew"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Bio-Inspired Control of Roughness and Trailing Edge Noise
    Clark, Ian Andrew (Virginia Tech, 2017-04-27)
    Noise from fluid flow over rough surfaces is an important consideration in the design and performance of certain vehicles with high surface-area-to-perimeter ratios. A new method of noise control based on the anatomy of owls is developed and consists of fabric or fibrous canopies suspended above the surface. The method is tested experimentally and is found to reduce the total far-field noise emitted by the surface. The treatment also is found to reduce the magnitude of pressure fluctuations felt by the underlying surface by up to three orders of magnitude. Experimental investigations into the effects of geometric parameters of the canopies lead to an optimized design which maximizes noise reduction. The results obtained during the canopy experiment inspired a separate new device for the reduction of trailing edge noise. This type of noise is generated by flow past the wing of an aircraft or the blades of a wind turbine, and is a source of annoyance for those in surrounding communities. The newly developed treatment consists of small fins, or "finlets," placed near the trailing edge of an airfoil. The treatment is tested experimentally at near-full-scale conditions and is found to reduce the magnitude of far-field noise by up to 10 dB. Geometric parameters of the finlets are tested to determine the optimal size and spacing of the finlets to maximize noise reduction. Follow-up computational and experimental studies reveal the fluid mechanics behind the noise reduction by showing that the finlets produce a velocity deficit in the flow near the trailing edge and limit the magnitude and spanwise correlation lengthscale of turbulence near the trailing edge, factors which determine the magnitude of far-field noise. In a final experiment, the finlets are applied to a marine propeller and are found to reduce not only trailing edge noise, but also noise caused by the bluntness of the trailing edge. The results of this experiment show the potential usefulness of finlets to reduce noise from rotating systems, such as fans or propellers, as well as from structures which feature blunt trailing edges.
  • Thumbnail Image
    A Study of Bio-Inspired Canopies for the Reduction of Roughness Noise
    Clark, Ian Andrew (Virginia Tech, 2015-01-09)
    The wings of most species of owl have been shown to possess three unique physical attributes which allow them to hunt in effective silence: a comb of evenly-spaced bristles along the wing leading-edge; a compliant and porous fringe of feathers at the trailing-edge; and a velvety down material distributed over the upper wing surface. This investigation focuses on the last of the mechanisms as a means to reduce noise from flow over surface roughness. A microscopic study of several owl feathers revealed the structure of the velvety down to be very similar to that of a forest or a field of crops. Analogous surface treatments (suspended canopies) were designed which simulated the most essential geometric features of the velvety down material. The Virginia Tech Anechoic Wall-Jet Facility was used to perform far-field noise and surface pressure fluctuation measurements in the presence of various combinations of rough surfaces and suspended canopies. All canopies were demonstrated to have a strong influence on the surface pressure spectra, and attenuations of up to 30 dB were observed. In addition, all canopies were shown to have some positive effects on far-field noise, and optimized canopies yielded far-field noise reductions of up to 8 dB across all frequencies at which roughness noise was observed. This development represents a new passive method for roughness noise control with possibility for future optimization and application to engineering structures.