Browsing by Author "Matson, John B."

Now showing 1 - 20 of 45
  • Thumbnail Image
    Advancing Elastomers to Additive Manufacturing Through Tailored Photochemistry and Latex Design
    Scott, Philip Jonathan (Virginia Tech, 2020-07-08)
    Additive manufacturing (AM) fabricates complex geometries inaccessible through other manufacturing techniques. However, each AM platform imposes unique process-induced constraints which are not addressed by traditional polymeric materials. Vat photopolymerization (VP) represents a leading AM platform which yields high geometric resolution, surface finish, and isotropic mechanical properties. However, this process requires low viscosity (<20 Pa·s) photocurable liquids, which generally restricts the molecular weight of suitable VP precursors. This obstacle, in concert with the inability to polymerize high molecular weight polymers in the printer vat, effectively limits the molecular weight of linear network strands between crosslink points (Mc) and diminishes the mechanical and elastic performance of VP printed objects. Polymer colloids (latex) effectively decouple the relationship between viscosity and molecular weight by sequestering large polymer chains within discrete, non-continuous particles dispersed in water, thereby mitigating long-range entanglements throughout the colloid. Incorporation of photocrosslinking chemistry into the continuous, aqueous phase of latex combined photocurability with the rheological advantages of latex and yielded a high molecular weight precursor suitable for VP. Continuous-phase photocrosslinking generated a hydrogel scaffold network which surrounded the particles and yielded a solid "green body" structure. Photorheology elucidated rapid photocuring behavior and tunable green body storage moduli based on scaffold composition. Subsequent water removal and annealing promoted particle coalescence by penetration through the scaffold, demonstrating a novel approach to semiinterpenetrating network (sIPN) formation. The sIPN's retained the geometric shape of the photocured green body yet exhibited mechanical properties dominated by the high molecular weight latex polymer. Dynamic mechanical analysis (DMA) revealed shifting of the latex polymer and photocrosslinked scaffold Tg's to a common value, a well-established phenomenon due phasemixing in (s)IPN's. Tensile analysis confirmed elastic behavior and ultimate strains above 500% for printed styrene-butadiene rubber (SBR) latexes which confirmed the efficacy of this approach to print high performance elastomers. Further investigations probed the versatility of this approach to other polymer compositions and a broader range of latex thermal properties. Semibatch emulsion polymerization generated a systematic series of random copolymer latexes with varied compositional ratios of hexyl methacrylate (HMA) and methyl methacrylate (MMA), and thus established a platform for investigating the effect of latex particle thermal properties on this newly discovered latex photoprocessing approach. Incorporation of scaffold monomer, N-vinyl pyrrolidone (NVP), and crosslinker, N,N'-methylene bisacrylamide (MBAm), into the continuous, aqueous phase of each latex afforded tunable photocurability. Photorheology revealed higher storage moduli for green bodies embedded with glassy latex particles, suggesting a reinforcing effect. Post-cure processing elucidated the necessity to anneal the green bodies above the Tg of the polymer particles to promote flow and particle coalescence, which was evidenced by an optical transition from opaque to transparent upon loss of the light-scattering particle domains. Differential scanning calorimetry (DSC) provided a comparison of the thermal properties of each neat latex polymer with the corresponding sIPN. Another direction investigated the modularity of this approach to 3D print mixtures of dissimilar particles (hybrid colloids). Polymer-inorganic hybrid colloids containing SBR and silica nanoparticles provided a highly tunable route to printing elastomeric nanocomposite sIPN's. The bimodal particle size distribution introduced by the mixture of SBR (150 nm) and silica (12 nm) nanoparticles enabled tuning of colloid behavior to introduce yield-stress behavior at high particle concentrations. High-silica hybrid colloids therefore exhibited both a shear-induced reversible liquid-solid transition (indicated by a modulus crossover) and irreversible photocrosslinking, which established a unique processing window for UV-assisted direct ink write (UV-DIW) AM. Concentric cylinder rheology probed the yield-stress behavior of hybrid colloids at high particle concentrations which facilitated both the extrusion of these materials through the UV-DIW nozzle and the retention of their as-deposited shaped during printing. Photorheology confirmed rapid photocuring of all hybrid colloids to yield increased moduli capable of supporting subsequent layers. Scanning electron microscopy (SEM) confirmed well-dispersed silica aggregates in the nanocomposite sIPN's. DMA and tensile confirmed significant reinforcement of (thermo)mechanical properties as a result of silica incorporation. sIPN's with relative weight ratio of 30:70 silica:SBR achieved maximum strains above 300% and maximum strengths over 10 MPa. In a different approach to enhancing VP part mechanical properties, thiol-ene chemistry provided simultaneous linear chain extension and crosslinking in oligomeric diacrylate systems, providing tunable increases to Mc of the photocured networks. Hydrogenated polybutadiene diacrylate (HPBDA) oligomers provided the first example of hydrocarbon elastomer photopolymers for VP. 1,6-hexanedithiol provided a miscible dithiol chain extender which introduced linear thiol-ene chain extension to compete with acrylate crosslinking. DMA and tensile confirmed a decrease in Tg and increased strain-at-break with decreased crosslink density. Other work investigated the synthesis and characterization of first-ever phosphonium polyzwitterions. Free radical polymerization synthesized air-stable triarylphosphine-containing polymers and random copolymers from the monomer 4-(diphenylphosphino) styrene (DPPS). ³¹P NMR spectroscopy confirmed quantitative post-polymerization alkylation of pendant triarylphosphines to yield phosphonium ionomers and polyzwitterions. Systematic comparison of neutral, ionomer, and polyzwitterions elucidated significant (thermo)mechanical reinforcement by interactions between large phosphonium sulfobetaine dipoles. Broadband dielectric spectroscopy (BDS) confirmed the presence of these dipoles through significant increases in static dielectric content. Small-angle X-ray scattering (SAX) illustrated ionic domain formation for all charged polymers.
  • Thumbnail Image
    Block Copolymer Solutions: Transport and Dynamics, Targeted Cargo Delivery, and Molecular Partitioning and Exchange
    Li, Xiuli (Virginia Tech, 2020-01-23)
    Block copolymers have been extensively applied in diverse fields including packaging, electrolytes, delivery devices, and biosensors. Multiple investigations have been carried out on polymeric materials for cargo delivery purpose to understand how they behave over time. Block copolymer micelles (BCMs) have demonstrated superiority to deliver cargo, especially in drug delivery due to their encapsulation of hydrophobic agents. This dissertation will mainly study BCMs for potential applications in cargo delivery. Methods to study BCMs, including NMR spectroscopy, relaxometry and diffusometry, can provide valuable molecular information, such as chemical structure, translational motion, inter- or intramolecular interaction, dynamics, and exchange kinetics. Therefore, this dissertation describes applications of versatile NMR methods to reveal the fundamental behaviors of block copolymer self-assemblies, such as their dynamic stability, cargo partitioning, polymer chain exchange, and chain distribution in solution. We have investigated two BCM systems. Poly(ethylene oxide)-b-(ε-caprolactone) (PEO-PCL) is a model system to study BCM dynamic stability. PEO-PCL can self-assemble into spherical micelles at 1% w/v in D2O-THF-d8 mixed solvents. We used NMR diffusometry to quantify diffusion coefficients and populations of micelles and unimers (i.e. free polymer chains in solution) over a range of temperature (21 – 50 °C) and solvent composition (10 – 100 vol % THF-d8). By mapping the micelle-unimer coexistence phase diagrams, we are able to enhance our ability to understand and design micelle structure and dynamics. Moreover, we can also probe the chain exchange kinetics between micelles using a new technique we developed – time-resolved NMR spin-lattice relaxation (T1) or TR-NMR. This technique is an analog to time-resolved small-angle neutron scattering (TR-SANS), which can monitor specific signal intensity changes caused after mixing of isotope-labeled micelle solutions. A second system, Pluronic® F127 (PEO99PPO69PEO99) is a test system to study BCM structure and dynamic changes upon drug uptake. Pluronic® F127 is a commercial copolymer that can solubilize different hydrophobic drugs in micelles. We successfully encapsulated three model drugs into Pluronic® F127 BCMs and investigated the effects of polymer concentration and drug composition on drug partitioning fractions. Also, we proposed to design and synthesize a series of block copolymers with varied glass transition temperatures in core-forming blocks. Using NMR diffusometry, we have measured the existing unimer concentrations in micellar solutions and correlated these results with chain mobility and internal chemical composition. Lastly, we have extended our expertise in NMR and polymers into the study of ion-containing polymer systems (polyelectrolytes). A critical problem in polymer science is the inability to reliably measure the molecular weight of polyelectrolytes. We are developing methods to solve this problem by using NMR diffusometry, rheology, scattering, and scaling theories to accomplish general molecular weight measurements for polyelectrolytes. In short, this dissertation describes studies to provide more perspectives on structural and dynamic properties at various time and length scales for polymeric materials. NMR measurements, in combination with many other advanced techniques, have given us a better picture of soft matter behaviors and provided guidance for synthesis and processing efforts, especially in block copolymer micelles for delivery purposes.
  • Thumbnail Image
    A brief guide to polymerization terminology (IUPAC Technical Report)
    Luscombe, Christine K.; Moad, Graeme; Hiorns, Roger C.; Jones, Richard G.; Keddie, Daniel J.; Matson, John B.; Merna, Jan; Nakano, Tamaki; Russell, Gregory T.; Topham, Paul D. (Walter De Gruyter, 2022-08)
    The use of self-consistent terminology to describe polymerizations is important for litigation, patents, research and education. Imprecision in these areas can be both costly and confusing. To address this situation the International Union of Pure and Applied Chemistry (IUPAC) has made recommendations, which are summarized below. In the version shown as the supplementary material, references and hyperlinks lead to source documents; screen tips contain definitions published in IUPAC recommendations. More details can also be found in the IUPAC Purple Book. This guide is one of a series on terminology and nomenclature. Refer to the supplementary material for the complete and interactive version of this brief guide.
  • Thumbnail Image
    Cationic Polythiophenes as Responsive DNA-Binding Polymers
    Carreon, Analyn C.; Santos, Webster L.; Matson, John B.; So, Regina C. (The Royal Society of Chemistry, 2013-09-23)
    A new water soluble cationic polythiophene derivative, poly(N,N,N-trimethyl-3-(2-(thiophen-3-yl)acetamido)propan-1-aminium iodide), was synthesized via two consecutive post-polymerization functionalizations of poly(methyl 2-(thiophen-3-yl)acetate). This conjugated polymer binds DNA at N/P = 5 and forms polyplexes at N/P = 10. Its potential use as a theranostic gene delivery vehicle is investigated here.
  • Thumbnail Image
    Chemical Modification of Cellulose Esters for Oral Drug Delivery
    Meng, Xiangtao (Virginia Tech, 2016-06-20)
    Polymer functional groups have critical impacts upon physical, chemical and mechanical properties, and thus affect the specific applications of the polymer. Functionalization of cellulose esters and ethers has been under extensive investigation for applications including drug delivery, cosmetics, food ingredients, and automobile coating. In oral delivery of poorly water-soluble drugs, amorphous solid dispersion (ASD) formulations have been used, prepared by forming miscible blends of polymers and drugs to inhibit crystallization and enhance bioavailability of the drug. The Edgar and Taylor groups have revealed that some cellulose omega-carboxyalkanoates were highly effective as ASD polymers, with the pendant carboxylic acid groups providing both specific polymer-drug interactions and pH-triggered release through swelling of the ionized polymer matrix. While a variety of functional groups such as hydroxyl and amide groups are also of interest, cellulose functionalization has relied heavily on classical methods such as esterification and etherification for appending functional groups. These methods, although they have been very useful, are limited in two respects. First, they typically employ harsh reaction conditions. Secondly, each synthetic pathway is only applicable for one or a narrow group of functionalities due to restrictions imposed by the required reaction conditions. To this end, there is a great impetus to identify novel reactions in cellulose modification that are mild, efficient and ideally modular. In the initial effort to design and synthesize cellulose esters for oral drug delivery, we developed several new methods in cellulose functionalization, which can overcome drawbacks of conventional synthetic pathways, provide novel cellulose derivatives that are otherwise inaccessible, and present a platform for structure-property relationship study. Cellulose omega-hydroxyalkanoates were previously difficult to access as the hydroxyl groups, if not protected, react with carboxylic acid/carbonyl during a typical esterification reaction or ring opening of lactones, producing cellulose-g-polyester and homopolyester. We demonstrated the viability of chemoselective olefin hydroboration-oxidation in the synthesis of cellulose omega]-hydroxyesters in the presence of ester groups. Cellulose esters with terminally olefinic side chains were transformed to the target products by two-step, one-pot hydroboration-oxidation reactions, using 9-borabicyclo[3.3.1]nonane (9-BBN) as hydroboration agent, followed by oxidizing the organoborane intermediate to a primary alcohol using mildly alkaline H2O2. The use of 9-BBN as hydroboration agent and sodium acetate as base catalyst in oxidation successfully avoided cleavage of ester linkages by borane reduction and base catalyzed hydrolysis. With the impetus of modular and efficient synthesis, we introduced olefin cross-metathesis (CM) in polysaccharide functionalization. Using Grubbs type catalyst, cellulose esters with terminally olefinic side chains were reacted with various CM partners including acrylic acid, acrylates and acrylamides to afford families of functionalized cellulose esters. Molar excesses of CM partners were used in order to suppress potential crosslinking caused by self-metathesis between terminally olefinic side chains. Amide CM partners can chelate with the ruthenium catalyst and cause low conversions in conventional solvents such as THF. While the inherent reactivity toward CM and tendency of acrylamides to chelate Ru is influenced by the acrylamide N-substituents, employing acetic acid as a solvent significantly improved the conversion of certain acrylamides. We observed that the CM products are prone to crosslinking during storage, and found that the crosslinking is likely caused by free radical abstraction of gamma-hydrogen of the alpha, beta-unsaturation and subsequent recombination. We further demonstrated successful hydrogenation of these alpha, beta-unsaturated acids, esters, and amides, thereby eliminating the potential for radical-induced crosslinking during storage. The alpha, beta-unsaturation on CM products can cause crosslinking due to gamma-H abstraction and recombination if not reduced immediately after reaction. Instead of eliminating the double bond by hydrogenation, we described a method to make use of these reactive conjugated olefins by post-CM thiol-Michael addition. Under amine catalysis, different CM products and thiols were combined and reacted. Using proper thiols and catalyst, complete conversion can be achieved under mild reaction conditions. The combination of the two modular reactions creates versatile access to multi-functionalized cellulose derivatives. Compared with conventional reactions, these reactions enable click or click-like conjugation of functional groups onto cellulose backbone. The modular profile of the reactions enables clean and informative structure-property relationship studies for ASD. These approaches also provide opportunities for the synthesis of chemically and architecturally diverse cellulosic polymers that are otherwise difficult to access, opening doors for many other applications such as antimicrobial, antifouling, in vivo drug delivery, and bioconjugation. We believe that the cellulose functionalization approaches we pioneered can be expanded to the modification of other polysaccharides and polymers, and that these reactions will become useful tools in the toolbox of polymer/polysaccharide chemists.
  • Thumbnail Image
    Cross-metathesized polysaccharide derivatives and processes for preparing them
    Edgar, Kevin J.; Matson, John B.; Meng, Xiangtao (US Patent Office, 2020-08-11)
    Methods for the cross-metathesis of polysaccharides with one or more olefin-terminated side chains and cross-metathesized products are described. In an exemplary embodiment, a method for the synthesis of cellulose ω-carboxyesters via olefin cross-metathesis is described. Conditions of the reactions were relatively mild and the olefin-substituted polysaccharides and the appropriate monomeric olefin partners appear to follow Grubbs rules as summarized herein. The compounds and methods may be useful for structure-property studies, particularly those aimed at developing polymers for drug delivery, such as for controlled-release drug delivery systems, controlled-release coatings, increasing bioavailability of drugs, and maintaining drug supersaturation in the GI tract.
  • Thumbnail Image
    Design and Synthesis of Cellulose Ether Derivatives for Oral Drug Delivery
    Dong, Yifan (Virginia Tech, 2017-05-31)
    Chemical modification of naturally occurring cellulose into ester and ether derivatives has been of growing interest due to inexhaustible cellulose resources, and to excellent properties and extremely broad applications of these derivatives. However, traditional esterification and etherification involve relatively harsh conditions (strongly acidic or strongly alkaline), greatly limiting the content and range of functional groups that may be installed onto the cellulose backbone. Amorphous solid dispersion (ASD) is an effective method to promote oral delivery of poorly-soluble drugs by dispersing crystalline drugs in a polymer matrix, creating drug supersaturation upon release. Cellulose 𝜔-carboxyesters have been proven to be effective ASD matrices for many different drugs; however, synthesis of such polymers involves protecting-deprotecting chemistry and one synthetic route only leads to one structure. Developing a new generation of cellulosic polymers for oral drug delivery such as ASD matrices requires new synthetic techniques and powerful tools. Olefin cross-metathesis (CM) is a mild, efficient and modular chemistry with extensive applications in organic, polymer, and polysaccharide chemistry. Successful CM can be achieved by appending olefin “handles” from cellulose esters and reacting with electron-deficient olefins like acrylic acid. Cellulose ethers have much better hydrolytic stability compared to esters and are also commercially very important. The overarching theme of this dissertation is to investigate modification of cellulose ether derivatives, and to design and synthesize effective ASD polymers by olefin CM. We first validated the strategy of performing CM by appending metathesis “handles” through etherification and then subjected these terminal olefins to various partners (acrylic acid and different acrylates). After demonstration of the concept, we applied different starting materials (e.g. ethyl cellulose, methyl cellulose, microcrystalline cellulose, and hydroxypropyl cellulose) with distinctive hydrophobicity/hydrophilicity balance. Furthermore, α,β-unsaturated CM products tended to undergo radical crosslinking through abstraction of 𝛾-protons and recombination of polymer radicals. In order to resolve this issue, we first applied post-CM hydrogenation and then explored a thiol-Michael addition to the α,β-unsaturation, which also incorporates an extra functional group through the thioether. We have successfully prepared a collection of cellulose 𝜔-carboxyether derivatives through the above-mentioned method and preliminary drug induction experiments also revealed that these derivatives hold high promise for ASD application. We also explored the possibility of conducting CM in a reverse order: i.e. appending electron-deficient acrylate groups to the polymer, then subjecting it to electron-rich small molecule terminal olefins. The failure of this metathesis approach was speculated to be due mainly to low acrylate reactivity on an already crowded polymer backbone and the high reactivity of rapidly diffusing, small molecule terminal olefins. Last but not least, we further utilized olefin CM to conjugate bile salt derivatives (e.g. lithocholic acid and deoxycholic acid) to a cellulose backbone by converting bile salts into acrylate substrates. Successful CM of bile salt acrylates to cellulose olefin “handles” further demonstrated the great versatility, excellent tolerance, and very broad applicability of this strategy. Overall, we have founded the strategy for performing successful olefin CM in many cellulose ether derivatives with acrylic acid and a variety of different acrylates. Post-CM hydrogenation efficiently removes the α,β-unsaturation and provides stable and effective cellulose 𝜔-carboxyether derivatives for ASD application. Tandem CM/thiol-Michael addition not only eliminates the crosslinking tendency but also enables an even broader library of polymer structures and architectures for structure-property investigations. We anticipate these methods can be readily adapted by polysaccharide chemists and applied with numerous complex structures, which would greatly broaden the range of cellulose and other polysaccharide derivatives for applications including ASDs, P-glycoprotein inhibition, antimicrobial, coating, and other biomedical applications.
  • Thumbnail Image
    Design and Synthesis of Supramolecular Structures for the Controlled Release of Sulfur Signaling Species
    Carrazzone, Ryan Joseph (Virginia Tech, 2022-02-08)
    In the early 2000s, hydrogen sulfide (H₂S) was added to the family of molecules known as gasotransmitters, a class of endogenously produced and freely diffusing biological signaling molecules. Since this discovery, biologists and chemists have sought to understand the physiological roles of H₂S and to elucidate the potential benefits of exogenous H₂S delivery. As a result, many synthetic small molecule donor compounds have been created to deliver H₂S in response to various biologically relevant stimuli. Furthermore, macromolecular and supramolecular H₂S donor systems have been created to protect donors in the biological milieu, extend release kinetics, or control H₂S release conditions. Thus, H₂S-donating nanostructures with precisely tuned release rates provide invaluable tools for further investigating the biological roles and therapeutic potential of H₂S. This work describes two polymer micelle systems for the controlled delivery of H₂S. The first system is based on H2S-releasing polymer amphiphiles with varying degrees of a plasticizing comonomer incorporated into the core-forming block. The glass transition temperature of the core-forming block varied predictably with incorporation of the plasticizing comonomer. Accordingly, the half-life of H₂S release decreased from 4.2 h to 0.18 h with increasing core-forming block mobility. The second system is based on H₂S releasing polymer amphiphiles with varying degrees of crosslinking in the core-forming block. The crosslinked system was designed to achieve control over H₂S release rate with minimal dilution of donor in the core-forming block. The half-life of H₂S release increased from 117 min to 210 min with increasing crosslink density in the core-forming block, further demonstrating that H₂S release rates can be precisely controlled by tuning micelle core mobility. Beyond control over H₂S release rate, further study of the biological roles of H₂S requires donor systems with precisely triggered release. To this end, this dissertation also discusses efforts to investigate fundamental micelle–unimer relationships. This section includes an evaluation of the impact of core-forming block mobility on micelle–unimer coexistence utilizing a model polymer amphiphile system. Unimer populations correlated with glass transition temperatures of the core-forming block, suggesting the need to consider micelle core mobility when discussing polymer chain phase behavior of amphiphilic block copolymers. Finally, this work discloses new methods for the radical polymerization of poly(olefin sulfones) with control over molecular weight. POSs are a unique class of polymers with great potential for stimuli-responsive depolymerization to generate sulfur dioxide (SO₂), a signaling gas related to H₂S.
  • Thumbnail Image
    Designing Multiphase Step-Growth Polymers for Advanced Technologies: From Electromechanical Transducers to Additive Manufacturing
    White, Benjamin Tyler (Virginia Tech, 2021-05-28)
    The synthesis and characterization of step-growth polymers with novel monomers provided materials with tailored properties for emerging technologies. Specifically, multiphase materials (i.e., microphase separated block copolymers) exploit the synergistic relationship of combining polymers with disparate thermal and mechanical properties. The introduction of intramolecular interactions such as hydrogen and ionic bonding into these polymers further tailored their properties for applications including elastomers, electromechanical transducers, and additive manufacturing (AM). A review of recent literature revealed the material properties required for polymeric materials in electromechanical transducers, which aided in the design of polymers for this application. An isocyanate-, catalyst-, and solvent-free approach facilitated the synthesis of segmented polyureas with tunable thermal and mechanical properties. These materials found use as high dielectric elastomers and water-soluble polymers for extrusion-based AM dependent on the backbone composition. Vat photopolymerization (VP) AM served as a technique to 3D printed novel unsaturated polyester resins (UPR). Incorporating a phosphonium ionic liquid as a reactive diluent replaced styrene and reduced the volatility of commonly used UPRs. VP successfully provided 3D structures from these UPRs that demonstrated limited ionic conductivities. An extensive review of the literature surrounding the structure-property relationships of charged block copolymers with varying architectures helped to inform the synthesis of novel, cationic step-growth polymers. The synthesis of a new phosphonium IL facilitated the synthesis of a segmented polyurethane containing a phosphonium-functionalized soft segment for the first time. This phosphonium polyurethane exhibited ionic conductivities comparable to literature examples of block copolymers used for ionic polymer transducers, which suggests that these materials may serve for this application as well. Carbonyldiimidazole provides a novel route towards synthesizing imidazolium ionenes with unique backbone structures. The coupling of poly(ethylene glycol) dibromides with a bis-carbonylimidazole monomer and a commercial aliphatic dibromide led to the formation of segmented imidazolium ionenes. These polymers exhibited significant atmospheric water uptake as well as water solubility. However, the physical properties of the materials suggested that the synthetic procedure resulted in low molecular weights. Suggested future work provides methods for circumventing this issue and proposes next steps for all the projects discussed herein.
  • Thumbnail Image
    Development of Transferable Coarse-Grained Models of Amino Acids
    Conway, Olivia Kristine (Virginia Tech, 2019-10-01)
    There are twenty standard amino acids that are the structural units of biomolecules and biomaterials such as proteins and peptide amphiphiles (PAs). The focus of this study was to develop accurate transferable coarse-grained (CG) models of those amino acids. In CG models, several atoms are represented together as a single pseudo-atom or "bead," which can allow the modeling of processes like self-assembly of biomolecules and biomaterials through reduction of degrees of freedom and corresponding increased computational speed. A 2:1 to 4:1 mapping scheme, in which a CG bead is comprised of two to four heavy atoms, respectively, and associated hydrogens, has been employed to represent functional groups in the amino acids. The amino acid backbone atoms are modeled as two beads while the side chains are modeled with one to three beads, and each terminus is modeled as one bead. The bonded parameters for the CG models were obtained from bond, angle, and dihedral distributions from all-atom molecular dynamics (MD) simulations of dipeptides. Non-bonded parameters were optimized using the particle swarm optimization (PSO) method to reproduce experimental properties (heat of vaporization, surface tension, and density) of analogues of the side chains, termini, and backbone groups of the amino acids. These CG models were used to study the self-assembly pathways and mechanisms of the PA c16-AHL3K3-CO2H in the presence of explicit CG water.
  • Thumbnail Image
    Effect of Backbone Structure on Membrane Properties for Poly(arylene ether) Random and Multiblock Copolymers
    Rowlett, Jarrett Robert (Virginia Tech, 2014-10-07)
    Poly(arylene ether)s are a well-established class of thermoplastics that are known for their mechanical toughness, thermal stability, and fabrication into membranes. These materials can undergo a myriad of modifications including backbone structure variability, sulfonation, and crosslinking. In this dissertation, structure-property relationships are considered for poly(arylene ether)s with regard to membrane applications for proton exchange and gas separation membranes. All of the proton exchange membranes in this dissertation focus on a disulfonated poly(arylene ether sulfone) based hydrophilic structure to produce hydrophilic-hydrophobic multiblock copolymers. The hydrophobic segments were based upon poly(arylene ether benzonitrile) polymers and copolymers. The oligomers were synthesized and isolated separately, then reacted under mild conditions to form the alternating multiblock copolymers. Structure-property relationships were considered for two different proton exchange membrane applications. One multiblock copolymer system was for H2/air fuel cells, and the other for direct methanol fuel cells (DMFCs). The H2/air fuel cells operate under harsh conditions and varying levels of relative humidity, while the DMFCs operate in an aqueous environment with a methanol-water mixture (typically 0.5-1 M MeOH). Thus two different approaches were taken for the multiblock copolymers. All of the multiblock copolymers were cast into membranes and after annealing resulted in drastically reduced water uptake as compared to random and non-annealed systems. The membranes were characterized with regard to composition, mechanical properties, morphology, water uptake, proton conductivity, and molecular weight. Membranes were also sent to collaborators to elicit the fuel cell performance of the proton exchange membranes. In H2/air fuel cells the approach was to increase charge density by bisphenol choice in the hydrophilic phase. This was performed by switching to a lower molecular weight monomer, hydroquinone, and a monosulfonated hydroquinone. This produced higher charge density in the hydrophilic phase, and the corresponding multiblock copolymer. With increased hydrophilicity the multiblock copolymers showed increased phase separation, proton conductivity, and better performance under relative humidity testing. In the second system for DMFCs, the primary goal was to reduce methanol permeability by bisphenol selection in the hydrophobic phase. This was done with by replacing fifty mole percent of the fluorinated monomer with a series of increasing hydrophobicity bisphenols. Addition of benzylic methyl groups on the bisphenols, was the method undertaken to increase the hydrophobicity. The combination of reduced fluorine content along with the addition of methyl groups resulted in multiblock copolymers with extremely low water uptake and methanol permeability. This allowed for a PEM with better performance than Nafion® in 1M MeOH in DMFC testing. The gas separation membranes presented in this dissertation are based upon poly(arylene ether ketone)s. Two systems were presented: one with a polymer directly synthesized with a bisphenol containing benzylic methyl groups and 4,4'-difluorobenzophenone, and the other a difunctional poly(phenylene oxide) oligomer polymerized with 4,4'-difluorobenzophenone. These systems were crosslinked via UV light through excitation of the ketone group to the triplet state and then hydrogen abstraction from the benzylic methyl. Confirmation of crosslinking was performed via differential scanning calorimetry and infrared spectroscopy. Changes in the glass transitions between crosslinked and non-crosslinked materials were characterized with respect to the concentration of ketones to elicit the effects of crosslink density on the polymers and copolymers. Gas transport properties showed a strong dependence on the ketone percentage as the selectivity was much higher for the homopolymer, while the permeability was higher for the PPO copolymer in the CO2/CH4 and O2/N2 gas pairs.
  • Thumbnail Image
    Elastin-Like Peptide Dendrimers: Design, Synthesis, and Applications
    Zhou, Mingjun (Virginia Tech, 2019-07-02)
    Elastin like peptides (ELPs)—derived from the protein elastin—are widely used as thermoresponsive components in biomaterials due to their LCST (lower critical solution temperature) behavior at a characteristic transition temperature (Tt). While linear ELPs have been well investigated, few reports focused on branched ELPs. Using lysine (Lys, with an additional side-chain amine) as branching units, ELP dendrimers were synthesized by solid-phase peptide synthesis (SPPS) with up to 155 amino acid residues. A secondary structure change with decreasing ratio of random coil and increasing ratio of β-turn upon heating, which is typical of linear ELPs, was confirmed by circular dichroism spectroscopy for all peptides. Conformational change did not show evident dependence on topology, while a higher Tt was observed for dendritic peptides than for their linear control peptides with the same number of GLPGL repeats. Variable-temperature small-angle X-ray scattering (SAXS) measurements showed a size increase and fractal dimension upon heating, even below the Tt. These results were further confirmed by cryogenic transmission electron microscopy (cryo-TEM), and micro differential scanning calorimetry (micro-DSC), revealing the presence of aggregates below the Tt. These results indicated the presence of a pre-coacervation step in the LCST phase transition of the ELP dendrimers. We further prepared hydrogels by crosslinking hyaluronic acid (HA) with ELP dendrimers. We invesigated their physical properties with scanning electron microscopy (SEM), swelling tests, SAXS, and model drug loading/release experiments. Most of the HA_denELP hydrogels retained transparent upon gelation, but after lyophilization and reswelling remained opaque for days. This reswelling process was carefully investigated with time-course SAXS studies, and was attributed to forming pre-coacervates in the gelation step, which slowly reswelled during rehydration. We then prepared hydrogels with H2S-releasing aroylthiooxime (SATO) groups and showed human neutrophil elastase-responsive H2S-releasing properties with potential applications in treating chronic diseases with recurring inflammation. Furthermore, we prepared a series of wedge-shaped triblock polyethylene glycol (PEG)-ELP dendrimer-C16 (palmitic acid) conjugate amphiphiles with adjustable Tts. Various techniques were used to investigate their hierarchical structures. The triblock PEG-peptide-C16 conjugate amphiphiles were thermoresponsive and showed a morphology change from small micelles to large aggregates. However, the hydrophilic shell and strong tendency for micelle formation limited the thermoresponsive assembly, leading to slow turbidity change in the LCST transition. The secondary structure was twisted from conventional β-sheet, and the thermoresponsive trend observed in typical ELP systems was not observed, either. Variable temperature NMR showed evidence for coherent dehydration of the PEG and ELP segments, probably due to the relatively short blocks. Utilizing the micelles with hydrophobic cavity, we were able to encapsulate hydrophobic drugs, with promising applications for localized drug release in hyperthermia.
  • Thumbnail Image
    Electrospun Scaffolds Functionalized with a Hydrogen Sulfide Donor Stimulate Angiogenesis
    Yao, Tianyu; van Nunen, Teun; Rivero, Rebeca; Powell, Chadwick; Carrazzone, Ryan; Kessels, Lilian; Wieringa, Paul Andrew; Hafeez, Shahzad; Wolfs, Tim G. A. M.; Moroni, Lorenzo; Matson, John B.; Baker, Matthew B. (American Chemical Society, 2022-06-17)
    Tissue-engineered constructs are currently limited by the lack of vascularization necessary for the survival and integration of implanted tissues. Hydrogen sulfide (H2S), an endogenous signaling gas (gasotransmitter), has been recently reported as a promising alternative to growth factors to mediate and promote angiogenesis in low concentrations. Yet, sustained delivery of H2S remains a challenge. Herein, we have developed angiogenic scaffolds by covalent attachment of an H2S donor to a polycaprolactone (PCL) electrospun scaffold. These scaffolds were engineered to include azide functional groups (on 1, 5, or 10% of the PCL end groups) and were modified using a straightforward click reaction with an alkyne-functionalized N-thiocarboxyanhydride (alkynyl-NTA). This created H2S-releasing scaffolds that rely on NTA ring-opening in water followed by conversion of released carbonyl sulfide into H2S. These functionalized scaffolds showed dose-dependent release of H2S based on the amount of NTA functionality within the scaffold. The NTA-functionalized fibrous scaffolds supported human umbilical vein endothelial cell (HUVEC) proliferation, formed more confluent endothelial monolayers, and facilitated the formation of tight cell-cell junctions to a greater extent than unfunctionalized scaffolds. Covalent conjugation of H2S donors to scaffolds not only promotes HUVEC proliferation in vitro, but also increases neovascularization in ovo, as observed in the chick chorioallantoic membrane assay. NTA-functionalized scaffolds provide localized control over vascularization through the sustained delivery of a powerful endogenous angiogenic agent, which should be further explored to promote angiogenesis in tissue engineering.
  • Thumbnail Image
    Enzyme-Triggered Chemodynamic Therapy via a Peptide-H2S Donor Conjugate with Complexed Fe2+
    Zhu, Yumeng; Archer, William R.; Morales, Katlyn F.; Schulz, Michael D.; Wang, Yin; Matson, John B. (Wiley-V C H Verlag, 2023-04)
    Inducing high levels of reactive oxygen species (ROS) inside tumor cells is a cancer therapy method termed chemodynamic therapy (CDT). Relying on delivery of Fenton reaction promoters such as Fe2+, CDT takes advantage of overproduced ROS in the tumor microenvironment. We developed a peptide-H2S donor conjugate, complexed with Fe2+, termed AAN-PTC-Fe2+. The AAN tripeptide was specifically cleaved by legumain, an enzyme overexpressed in glioma cells, to release carbonyl sulfide (COS). Hydrolysis of COS by carbonic anhydrase formed H2S, an inhibitor of catalase, an enzyme that detoxifies H2O2. Fe2+ and H2S together increased intracellular ROS levels and decreased viability in C6 glioma cells compared with controls lacking either Fe2+, the AAN sequence, or the ability to generate H2S. AAN-PTC-Fe2+ performed better than temezolimide while exhibiting no cytotoxicity toward H9C2 cardiomyocytes. This study provides an H2S-amplified, enzyme-responsive platform for synergistic cancer treatment.
  • Thumbnail Image
    Facile route to air and moisture stable β-difluoroboryl acrylamides
    Medici, Eric (Virginia Tech, 2019-09)
    A method for the preparation of air stable difluoroboryl acrylamides is reported. In contrast to the ubiquitous organotrifluoroborate salts, difluoroboryl acrylamides are relatively nonpolar and are readily purified by silica gel chromatography. Difluoroboryl acrylamides serve as efficient substrates in cross-coupling reactions to afford the corresponding trisubstituted acrylamides in good to excellent yields. The utility of the difluoroboryl group in various chemical transformations is presented.
  • Thumbnail Image
    Fluorescent detection of hydrogen sulfide (H2S) through the formation of pyrene excimers enhances H2S quantification in biochemical systems
    Pose, Manuela; Dillon, Kearsley M.; Denicola, Ana; Alvarez, Beatriz; Matson, John B.; Moeller, Matias N.; Cuevasanta, Ernesto (Elsevier, 2022-10)
    Hydrogen sulfide (H2S) is produced endogenously by several enzymatic pathways and modulates physiological functions in mammals. Quantification of H2S in biochemical systems re-mains challenging because of the presence of interferents with similar reactivity, particularly thiols. Herein, we present a new quantification method based on the formation of pyrene exci-mers in solution. We synthesized the probe 2-(maleimido)ethyl 4-pyrenylbutanoate (MEPB) and determined that MEPB reacted with H2S in a two-step reaction to yield the thioether-linked dimer (MEPB)2S, which formed excimers upon excita-tion, with a broad peak of fluorescence emission centered at 480 nm. In contrast, we found that the products formed with thiols showed peaks at 378 and 398 nm. The difference in emission between the products prevented the interference. Furthermore, we showed that the excimer fluorescence signal yielded a linear response to H2S, with a limit of detection of 54 nM in a fluorometer. Our quantification method with MEPB was successfully applied to follow the reaction of H2S with glutathione disulfide and to quantify the production of H2S from cysteine by Escherichia coli. In conclusion, this method represents an addition to the toolkit of biochemists to quantify H2S specifically and sensitively in biochemical systems.
  • Thumbnail Image
    From Block Copolymers to Crosslinked Networks: Anionic Polymerization Affords Functional Macromolecules for Advanced Technologies
    Schultz, Alison (Virginia Tech, 2016-07-26)
    Ion-containing macromolecules continue to stimulate new opportunities for emerging electro-active applications ranging from high performance energy devices to water purification membranes. Progress in polymer synthesis and engineering now permit well-defined, ion-containing macromolecules with tunable morphologies, mechanical performance, ion conductivity, and 3D structure in order to address these globally challenged technologies. Achieving tailored chemical compositions with high degrees of phase separation for optimizing conductivity and water adsorption remains a constant synthetic challenge and presents an exciting opportunity for engineering sophisticated macromolecular architectures. This dissertation will introduce unprecedented charged polymers using conventional free radical and anionic polymerization to incorporate ionic functionalities based on phosphonium cations. This new class of copolymers offers unique properties with ionic functionality for tailorable electro-active performance.
  • Thumbnail Image
    Functional Polymers Containing Semi-Rigid Alternating Sequences
    Huang, Jing (Virginia Tech, 2017-12-12)
    Alternating copolymers represent a special class of copolymers in which the two comonomers copolymerize in a regular alternating sequence along the polymer chain. Of particular interest in our group are the stilbene-maleic anhydride/maleimide alternating copolymers. These copolymers possess sterically congested backbones and precisely placed functional groups arising from the strictly alternating copolymerization. The research in this dissertation is focused on the synthesis, characterization, and potential application of functionalized copolymers that contain semi-rigid alternating copolymer sequences. The fluorescence properties of a series of non-conjugated, tert-butyl carboxylate functionalized alternating copolymers were investigated. Extraordinarily high fluorescent intensity with excellent linearity was observed for the di-tert-butyl group-containing stilbene and maleic anhydride alternating copolymer in THF. We attributed the origin of the strong fluorescence to the “through space” π – π interactions between the phenyl rings from the stilbene and C=O groups from the anhydride. The fluorescence was maintained when the copolymer was deprotected and hydrolyzed and the resulting carboxylic acid-functionalized copolymer was dissolved in water at neutral pH. The tert-butyl carboxylate functionalized alternating copolymer sequences were incorporated into highly crosslinked polymer networks using suspension polymerization. After removing the tert-butyl groups by acidic hydrolysis, the surface area of the networks increased significantly. Using this facile two-step strategy, we were able to achieve nanoporous polymers with BET surface area up to 817 m2/g and carboxylic acid-functionalized surfaces. The BET surface area of deprotected polymers increased with increasing crosslinking density, and the stilbene-containing polymers showed systematically higher BET surface area than the styrene-containing polymers due to the stiffness of the alternating sequences. The resulting nanoporous polymers have potential to be employed as solid sorbents for CO2. The same tert-butyl carboxylate functionalized alternating copolymer sequences were also incorporated into microgels via miniemulsion polymerization. The miniemulsion technique ensured the successful synthesis of microgels with ~100 nm diameter using solid stilbene and maleimide monomers. The resulting tert-butyl carboxylate-containing microgels were converted into carboxylic acid-containing aqueous microgels by acid hydrolysis. These aqueous microgels showed good and reversible lead and copper ion adsorption capacities. Amine-functionalized nanoporous polymers were synthesized by the post-modification of highly-crosslinked divinylbenzene-maleic anhydride polymers. High amine-contents were achieved by covalently attaching multiamines to the acid-chloride functionalized polymer surface. The resulting polymers showed medium to high BET surface areas (up to 500 m2/g) and high CO2 capture capacities.
  • Thumbnail Image
    High Performance Engineering Polymers: Design, Properties, and Performance
    Dennis, Joseph M. (Virginia Tech, 2017-04-18)
    The facile synthesis of engineering thermoplastics enabled the development of structure-morphology-property relationships for a wide range of applications. Utilizing step-growth polymerization techniques, a myriad of reaction conditions probed various polymer families including polysulfones, polyesters, polyimides and polyureas. Copolymers ranging from random to segmented sequences provided insight into the influence of segment length on physical properties. Melting temperatures, glass transition temperatures, and mechanical properties responded systematically to segment length and morphology. Leveraging several complementary analytical techniques identified critical segment lengths required for phase separation and crystallization within these copolymers. Introduction of hydrogen bonding further complicated the interrelationships between thermal and mechanical properties, and possible co-crystallization between dissimilar segments occurred. Finally, branching out from linear copolymers to other topologies determined the influence of branch length on rheological and mechanical properties. The commercially-viable synthesis of these various thermoplastics further highlights the immediate impact on state-of-the-art materials, and the fundamental development described herein provides a road map for future development in this field.
  • Thumbnail Image
    Hydrogen Abstraction by the Nighttime Atmospheric Detergent NO3·: Fundamental Principles
    Paradzinsky, Mark (Virginia Tech, 2021-06-10)
    The nitrate radical (NO3·) was first identified as early as the 1881, but its role in atmospheric oxidation has only been identified within recent decades. Due to its high one-electron reduction potential and its reactivity toward a diverse set of substrates, it dominates nighttime atmospheric oxidation and has since been the subject of much work. Despite this, studies on NO3· hydrogen atom transfer reactions have been somewhat neglected in favor of its more reactive oxidative pathways. The first section of the dissertation will highlight the role of substrate structure, solvent effects, and the presence of a polar transition state on NO3· hydrogen abstractions from alcohols, alkanes, and ethers. In this work the acquisition of absolute rate constants from previously unexamined substrates was analyzed alongside a curated list of common organic pollutants degraded through hydrogen atom abstraction. It was found that NO3· reacts with low selectivity through an early polarized transition state with a modest degree of charge transfer. Compared to the gas-phase, condensed-phase reactions experience rate enhancement—consistent with Kirkwood theory—as a result of the polarized transition state. These insights are then applied to abstractions by NO3· from carboxylic acids in the next section. It was found that the rate constants for abstraction of α-carbons were diminished through induction by the adjacent carbonyl compared to the activation seen for the aforementioned substrates. The deactivation of abstraction by the carbonyl was found to be dramatically reduced as the substrate's alkyl chain was lengthened and/or branched. This apparent change in mechanism coincides with hydrogen abstraction of the alkyl chain for sufficiently large carboxylic acids and rules out the possibility of concerted bond breaking elsewhere in the molecule. Finally, the dissertation will cover some additional projects related to the overall nature of the work including examination of the kinetics of radical clock systems when complexed with metal ions and the examination of a highly oxidative biosourced monomer.