Scholarly Works, Electrical and Computer Engineering

Permanent URI for this collection

https://hdl.handle.net/10919/23145

Research articles, presentations, and other scholarship

Browse

Now showing 1 - 20 of 565

3D printed graphene-based self-powered strain sensors for smart tires in autonomous vehicles
Maurya, Deepam; Khaleghian, Seyedmeysam; Sriramdas, Rammohan; Kumar, Prashant; Kishore, Ravi Anant; Kang, Min-Gyu; Kumar, Vireshwar; Song, Hyun-Cheol; Lee, Seul-Yi; Yan, Yongke; Park, Jung-Min (Jerry); Taheri, Saied; Priya, Shashank (2020-10-26)
The transition of autonomous vehicles into fleets requires an advanced control system design that relies on continuous feedback from the tires. Smart tires enable continuous monitoring of dynamic parameters by combining strain sensing with traditional tire functions. Here, we provide breakthrough in this direction by demonstrating tire-integrated system that combines direct mask-less 3D printed strain gauges, flexible piezoelectric energy harvester for powering the sensors and secure wireless data transfer electronics, and machine learning for predictive data analysis. Ink of graphene based material was designed to directly print strain sensor for measuring tire-road interactions under varying driving speeds, normal load, and tire pressure. A secure wireless data transfer hardware powered by a piezoelectric patch is implemented to demonstrate self-powered sensing and wireless communication capability. Combined, this study significantly advances the design and fabrication of cost-effective smart tires by demonstrating practical self-powered wireless strain sensing capability. Designing efficient sensors for smart tires for autonomous vehicles remains a challenge. Here, the authors present a tire-integrated system that combines direct mask-less 3D printed strain gauges, flexible piezoelectric energy harvester for powering the sensors and secure wireless data transfer electronics, and machine learning for predictive data analysis.
6G Enabled Smart Infrastructure for Sustainable Society: Opportunities, Challenges, and Research Roadmap
Imoize, Agbotiname Lucky; Adedeji, Oluwadara; Tandiya, Nistha; Shetty, Sachin (MDPI, 2021-03-02)
The 5G wireless communication network is currently faced with the challenge of limited data speed exacerbated by the proliferation of billions of data-intensive applications. To address this problem, researchers are developing cutting-edge technologies for the envisioned 6G wireless communication standards to satisfy the escalating wireless services demands. Though some of the candidate technologies in the 5G standards will apply to 6G wireless networks, key disruptive technologies that will guarantee the desired quality of physical experience to achieve ubiquitous wireless connectivity are expected in 6G. This article first provides a foundational background on the evolution of different wireless communication standards to have a proper insight into the vision and requirements of 6G. Second, we provide a panoramic view of the enabling technologies proposed to facilitate 6G and introduce emerging 6G applications such as multi-sensory–extended reality, digital replica, and more. Next, the technology-driven challenges, social, psychological, health and commercialization issues posed to actualizing 6G, and the probable solutions to tackle these challenges are discussed extensively. Additionally, we present new use cases of the 6G technology in agriculture, education, media and entertainment, logistics and transportation, and tourism. Furthermore, we discuss the multi-faceted communication capabilities of 6G that will contribute significantly to global sustainability and how 6G will bring about a dramatic change in the business arena. Finally, we highlight the research trends, open research issues, and key take-away lessons for future research exploration in 6G wireless communication.
Aberrant Calcium Signaling in Astrocytes Inhibits Neuronal Excitability in a Human Down Syndrome Stem Cell Model
Mizuno, Grace O.; Wang, Yinxue; Shi, Guilai; Wang, Yizhi; Sun, Junqing; Papadopoulos, Stelios; Broussard, Gerard J.; Unger, Elizabeth K.; Deng, Wenbin; Weick, Jason; Bhattacharyya, Anita; Chen, Chao-Yin; Yu, Guoqiang; Looger, Loren L.; Tian, Lin (Elsevier, 2018-07-10)
Down syndrome (DS) is a genetic disorder that causes cognitive impairment. The staggering effects associated with an extra copy of human chromosome 21 (HSA21) complicates mechanistic understanding of DS pathophysiology. We examined the neuronastrocyte interplay in a fully recapitulated HSA21 trisomy cellular model differentiated from DS-patientderived induced pluripotent stem cells (iPSCs). By combining calciumimaging with genetic approaches, we discovered the functional defects of DS astroglia and their effects on neuronal excitability. Compared with control isogenic astroglia, DS astroglia exhibited more-frequent spontaneous calcium fluctuations, which reduced the excitability of co-cultured neurons. Furthermore, suppressed neuronal activity could be rescued by abolishing astrocytic spontaneous calcium activity either chemically by blocking adenosine-mediated signaling or genetically by knockdown of inositol triphosphate (IP3) receptors or S100B, a calcium binding protein coded on HSA21. Our results suggest a mechanism by which DS alters the function of astrocytes, which subsequently disturbs neuronal excitability.
Acoustic Energy Harvesting and Sensing via Electrospun PVDF Nanofiber Membrane
Shehata, Nader; Hassanin, Ahmed H.; Elnabawy, Eman; Nair, Remya; Bhat, Sameer A.; Kandas, Ishac (MDPI, 2020-05-31)
This paper introduces a new usage of piezoelectric poly (vinylidene fluoride) (PVDF) electrospun nanofiber (NF) membrane as a sensing unit for acoustic signals. In this work, an NF mat has been used as a transducer to convert acoustic signals into electric voltage outcomes. The detected voltage has been analyzed as a function of both frequency and amplitude of the excitation acoustic signal. Additionally, the detected AC signal can be retraced as a function of both frequency and amplitude with some wave distortion at relatively higher amplitudes and within a certain acoustic spectrum region. Meanwhile, the NFs have been characterized through piezoelectric responses, beta sheet calculations and surface morphology. This work is promising as a low-cost and innovative solution to harvest acoustic signals coming from wide resources of sound and noise.
Acoustic X-wave reflection and transmission at a planar interface: Spectral analysis
Shaarawi, Amr M.; Besieris, Ioannis M.; Attiya, Ahmed M.; El-Diwany, Essam (Acoustical Society of America, 2000-01-01)
The spectral structure of a three-dimensional X-wave pulse incident on a planar surface of discontinuity is examined. Introducing a novel superposition of azimuthally dependent pulsed plane waves, it is shown for oblique incidence that the reflected pulse has a localized wave structure. On the other hand, the transmitted field maintains its localization up to a certain distance from the interface, beyond which it starts disintegrating. An estimate of the localization range of the transmitted pulse is established; also, the parameters affecting the localization range are identified. The reflected and transmitted fields are deduced for X-waves incident from either a slower medium or a faster one. For the former case the evanescent fields in the second medium are calculated and their explicit time dependence is deduced for a normally incident X-wave. Furthermore, at near-critical incidence the transmitted pulse exhibits significant pulse compression and focusing.
Acousto-Optics: introduction to the feature issue
Poon, Ting-Chung; Tsai, C. S.; Voloshinov, V. B.; Chatterjee, M. R. (Optical Society of America, 2009-03-01)
This Acousto-Optics feature celebrates the scientific careers of two remarkable scientists, Antoni Sliwinski and Adrian Korpel. The feature includes original papers based on a representative selection of topics that were presented at the Tenth Spring School on Acousto-Optics held in Poland in May 2008. (C) 2009 Optical Society of America
Active suppression of acoustic radiation from impulsively excited structures
Baumann, William T.; Saunders, William R.; Robertshaw, Harry H. (Acoustical Society of America, 1991-12-01)
The objective is to use active control to suppress the acoustic energy that is radiated to the far field from a structure that has been excited by a short-duration pulse. The problem is constrained by the assumption that the far-field pressure cannot be directly measured. Therefore, a method is developed for estimating the total radiated energy from measurements on the structure. Using this estimate as a cost function, a feedback controller is designed using linear quadratic regulator theory to minimize the cost. Computer simulations of a clamped-clamped beam show that there is appreciable difference in the total radiated energy between a system with a controller designed to suppress vibrations of the structure and a system with a controller that takes into account the coupling of these vibrations to the surrounding fluid. The results of this work provide a framework for a general, model-based method for actively suppressing transient structural acoustic radiation that can also be applied to steady, narrow, or broadband disturbances.
Adaptive Optical Scanning Holography
Tsang, P. W. M.; Poon, Ting-Chung; Liu, J. Ping (Springer Nature, 2016-02-26)
Optical Scanning Holography (OSH) is a powerful technique that employs a single-pixel sensor and a row-by-row scanning mechanism to capture the hologram of a wide-view, three-dimensional object. However, the time required to acquire a hologram with OSH is rather lengthy. In this paper, we propose an enhanced framework, which is referred to as Adaptive OSH (AOSH), to shorten the holographic recording process. We have demonstrated that the AOSH method is capable of decreasing the acquisition time by up to an order of magnitude, while preserving the content of the hologram favorably.
"Adaptive Pilot Patterns for CA-OFDM Systems in Non-stationary Wireless Channels"
Rao, Raghunandan M.; Marojevic, Vuk; Reed, Jeffrey H. (IEEE, 2017-09-12)
In this paper, we investigate the performance gains of adapting pilot spacing and power for Carrier Aggregation (CA)-OFDM systems in nonstationary wireless channels. In current multi-band CAOFDM wireless networks, all component carriers use the same pilot density, which is designed for poor channel environments. This leads to unnecessary pilot overhead in good channel conditions and performance degradation in the worst channel conditions. We propose adaptation of pilot spacing and power using a codebook-based approach, where the transmitter and receiver exchange information about the fading characteristics of the channel over a short period of time, which are stored as entries in a channel profile codebook. We present a heuristic algorithm that maximizes the achievable rate by finding the optimal pilot spacing and power, from a set of candidate pilot configurations. We also analyze the computational complexity of our proposed algorithm and the feedback overhead. We describe methods to minimize the computation and feedback requirements for our algorithm in multi-band CA scenarios and present simulation results in typical terrestrial and air-to ground/ air-to-air nonstationary channels. Our results show that significant performance gains can be achieved when adopting adaptive pilot spacing and power allocation in nonstationary channels. We also discuss important practical considerations and provide guidelines to implement adaptive pilot spacing in CAOFDM systems.
Adhesive bondline interrogation using Stoneley wave methods
Claus, Richard O.; Kline, R. A. (American Institute of Physics, 1979)
In this work, a new technique for analyzing interfacial conditions in completed adhesive bonds is discussed. This method is based on the sensitivity of Stoneley waves, which propagate along the boundary between dissimilar solid media, to changes in the material properties of the interface region. Stoneley wave attenuation measured after processing was found to increase as a function of increasing surface roughness in specimens of borosilicate crown glass bonded with an aerobic cement to a substrate of 7740 Pyrex mirrorglass. Possible extensions of these results to high_strength structural adhesively bonded composites are discussed.
Aging into Perceptual Control: A Dynamic Causal Modeling for fMRI Study of Bistable Perception
Dowlati, Ehsan; Adams, Sarah E.; Stiles, Alexandra; Moran, Rosalyn J. (Frontiers, 2016-03-31)
Aging is accompanied by stereotyped changes in functional brain activations, for example a cortical shift in activity patterns from posterior to anterior regions is one hallmark revealed by functional magnetic resonance imaging (fMRI) of aging cognition. Whether these neuronal effects of aging could potentially contribute to an amelioration of or resistance to the cognitive symptoms associated with psychopathology remains to be explored. We used a visual illusion paradigm to address whether aging affects the cortical control of perceptual beliefs and biases. Our aim was to understand the effective connectivity associated with volitional control of ambiguous visual stimuli and to test whether greater top-down control of early visual networks emerged with advancing age. Using a bias training paradigm for ambiguous images we found that older participants (n = 16) resisted experimenter-induced visual bias compared to a younger cohort (n = 14) and that this resistance was associated with greater activity in prefrontal and temporal cortices. By applying Dynamic Causal Models for fMRI we uncovered a selective recruitment of top-down connections from the middle temporal to Lingual gyrus (LIN) by the older cohort during the perceptual switch decision following bias training. In contrast, our younger cohort did not exhibit any consistent connectivity effects but instead showed a loss of driving inputs to orbitofrontal sources following training. These findings suggest that perceptual beliefs are more readily controlled by top-down strategies in older adults and introduce age-dependent neural mechanisms that may be important for understanding aberrant belief states associated with psychopathology.
Analysis Of A High-Speed Fiber-Optic Spectrometer For Fiber-Optic Sensor Signal Processing
Wang, Y. X.; Han, M.; Wang, Anbo (Optical Society of America, 2007)
A novel high-speed fiber-optic spectrometer has been demonstrated in our previous work. The high-speed spectrum measurement is enabled by translating the spectral-domain signal into a time-domain signal through a dispersion element. We present a mathematical model that accurately describes the relationship between the optical spectrum to be measured and the dispersed time-domain signal. Based on the model, the effects of the key parameters on the performance of the spectrometer are investigated in detail using numerical simulation. The analysis is useful for the design and application of such spectrometers. (C) 2007 Optical Society of America.
Analysis of one-dimensional photonic band gap structures with a liquid crystal defect towards development of fiber-optic tunable wavelength filters
Del Villar, I.; Matias, I. R.; Arregui, F. J.; Claus, Richard O. (Optical Society of America, 2003-03-01)
A theoretical analysis of a fiber optical photonic band gap based tunable wavelength filter is presented. The design presented here is based on the quarter wave reflector with a liquid crystal defect layer in the middle of the structure. The filter generated by the structure is shifted in wavelength as the voltage applied to the structure is modified. Some critical parameters are analyzed: the effect of the consideration of fiber as the first layer and not the input medium in the shape of the filter, the number of layers of the structure, and the thickness of the defect layer. This last parameter determines the width of the wavelength sweep of the filter, but is limited by the creation of more defects. Some rules of practical implementation of this device are also given. (C) 2003 Optical Society of America
Analysis of optical response of long period fiber gratings to nm-thick thin-film coatings
Wang, Zhiyong; Heflin, James R.; Stolen, Rogers H.; Ramachandran, Siddharth (Optical Society of America, 2005-04-01)
We have theoretically and experimentally demonstrated that the resonant wavelength of long period fiber gratings (LPG) can be shifted by a large magnitude by coating with only a nm-thickthin-film that has a refractive index higher than that of the glass cladding. The resonant wavelength shift can result from either the variation of the thickness of the film and/or the variation of its refractive index. These results demonstrate the sensitivity of LPG-based sensors can be enhanced by using a film of nm-thickness and refractive index greater than silica. This coating schematic offers an efficient platform for achieving high-performance index-modulating fiber devices and high-performance index/thickness-sensing LPG-based fiber sensors for detecting optical property variations of the thin-film coating. (C) 2005 Optical Society of America.
Analysis of ultrasonic frequency response of surface attached fiber Bragg grating
Li, Zhuoxuan; Pei, Li; Dong, Bo; Ma, Cheng; Wang, Anbo (Optical Society of America, 2012-07-01)
In recent years, fiber Bragg grating (FBG), for the well-known advantages over other fiber optic sensors, has attracted more attention in ultrasonic inspection for structure health monitoring (SHM). Spectrum shift of FBG to ultrasonic wave is caused by the refractive index profile changing along the FBG, which can be attributed to nonuniform perturbation caused by strain-optic and geometric effects of ultrasonic wave. Response of FBG to the above two effects was analyzed firstly by the V-I transmission matrix model, showing high computing efficiency. Based on this model, spectra response of FBG under changing ultrasonic frequencies was simulated and discussed. In experiment, the system was able to detect a wideband ultrasonic wave ranging from 15 to 1380 kHz. These results would provide a guideline for an FBGbased acoustic detection system design in a specific ultrasonic frequency. (C) 2012 Optical Society of America
Analytical brightness compensation algorithm for traditional polygon-based method in computer-generated holography
Pan, Y. J.; Wang, Y. T.; Liu, J.; Li, X.; Jia, J.; Zhang, Z. (Optical Society of America, 2013-06-01)
In three-dimensional (3D) holographic display, current brightness compensation algorithm of the traditional polygon-based method experimentally obtains the compensation factor, which depends on the fabrication process. In this paper, we proposed an analytical brightness compensation method discarding the influence of the fabrication. The surface property function with the flat power spectral density and the compensation factor obtained from the simplified relationship between the original and the rotated frequencies are used to analytically compensate the radiant energy of the tilted polygon. The optical reconstruction results show the proposed method could effectively compensate the brightness and ensure the further shading process. The proposed method separates the brightness compensation from the fabrication process, which is important for deepening the investigation of the hologram fabrication and achieving realistic 3D reconstruction. (C) 2013 Optical Society of America
Analyzing Impact of Distributed PV Generation on Integrated Transmission & Distribution System Voltage Stability — A Graph Trace Analysis Based Approach
Bhatti, Bilal Ahmad; Broadwater, Robert; Dilek, Murat (MDPI, 2020-09-01)
The use of a Graph Trace Analysis (GTA)-based power flow for analyzing the voltage stability of integrated Transmission and Distribution (T&D) networks is discussed in the context of distributed Photovoltaic (PV) generation. The voltage stability of lines and the load carrying capability of buses is analyzed at various PV penetration levels. It is shown that as the PV generation levels increase, an increase in the steady state voltage stability of the system is observed. Moreover, within certain regions of stability margin changes, changes in voltage stability margins of transmission lines are shown to be linearly related to changes in the loading of the lines. Two case studies are presented, where one case study involves a model with eight voltage levels and 784,000 nodes. In one case study, a voltage-stability heat map is used to demonstrate the identification of weak lines and buses.
Anomalously low geomagnetic energy inputs during 2008 solar minimum
Deng, Yue; Huang, Yanshi; Solomon, Stan; Qian, Liying; Knipp, Delores; Weimer, Daniel R.; Wang, Jing-Song (American Geophysical Union, 2012-09-01)
The record-low thermospheric density during the last solar minimum has been reported and it has been mainly explained as the consequence of the anomalously low solar extreme ultraviolet (EUV) irradiance. In this study, we examined the variation of the energy budget to the Earth's upper atmosphere during last solar cycle from both solar EUV irradiance and geomagnetic energy, including Joule heating and particle precipitation. The globally integrated solar EUV power was calculated from the EUV flux model for aeronomic calculations (EUVAC) driven by the MgII index. The annal average of solar power in 2008 was 33 GW lower than that in 1996. The decrease of the globally integrated geomagnetic energy from 1996 to 2008 was close to 29 GW including 13 GW for Joule heating from Weimer (2005b) and 16 GW for particle precipitation from NOAA Polar-Orbiting Environmental Satellites (POES) measurements. Although the estimate of the solar EUV power and geomagnetic energy vary from model to model, the reduction of the geomagnetic energy was comparable to the solar EUV power. The Thermosphere Ionosphere Electrodynamic General Circulation Model (TIEGCM) simulations indicate that the solar irradiance and geomagnetic energy variations account for 3/4 and 1/4 of the total neutral density decrease in 2008, respectively.
Anti-islanding detection for three-phase distributed generation
(United States Patent and Trademark Office, 2017-04-25)
Wobbling the operating frequency of a phase-locked loop (PLL), preferably by adding a periodic variation is feedback gain or delay in reference signal phase allows the avoidance of any non-detection zone that might occur due to exact synchronization of the phase locked loop operating frequency with a reference signal. If the change in PLL operating frequency is periodic, it can be made of adequate speed variation to accommodate and time requirement for islanding detection or the like when a reference signal being tracked by the PLL is lost. Such wobbling of the PLL operating frequency is preferably achieved by addition a periodic variable gain in a feedback loop and/or adding a periodically varying phase delay in a reference signal and/or PLL output.
Aperture synthesis of time-limited X waves and analysis of their propagation characteristics
Chatzipetros, Argyrios A.; Shaarawi, Amr M.; Besieris, Ioannis M.; Abdel-Rahman, Mohammad J. (Acoustical Society of America, 1998-05-01)
The feasibility of exciting a localized X-wave pulse from a finite aperture is addressed. Also, the possibility of using a finite-time excitation of a dynamic aperture to generate a finite-energy approximation to an X-wave pulse is explored. The analysis is carried out by using a Gaussian time window to time limit the infinite X-wave initial excitation. Huygens' construction is used to calculate the amplitude of the radiated wave field away from the finite-time source. The decay rate of the peak of the X wave is compared to that of a quasi-monochromatic signal. It is shown that the finite-time X-wave propagates to much farther distances without significant decay. Furthermore, the decay pattern of the radiated X-wave pulse is derived for a source consisting of an array of concentric annular sections. The decay behavior of the radiated pulse is similar to that of an X-wave launched from a finite-time aperture. This confirms the fact that time windowing the infinite energy X-wave excitation is a viable scheme for constructing finite apertures. A discussion of the diffraction limit of the X-wave pulse is also provided.

Browse

Browsing Scholarly Works, Electrical and Computer Engineering by Department "Electrical and Computer Engineering"

Results Per Page

Sort Options