Department of Chemistry

Permanent URI for this community

https://hdl.handle.net/10919/23842

Browse

Now showing 1 - 20 of 23

Ammonium Bisphosphonate Polymeric Magnetic Nanocomplexes for Platinum Anticancer Drug Delivery and Imaging with Potential Hyperthermia and Temperature-Dependent Drug Release
Zhang, Rui; Fellows, Benjamin; Pothayee, Nikorn; Hu, Nan; Pothayee, Nipon; Jo, Ami; Bohórquez, Ana C.; Rinaldi, Carlos; Mefford, Olin Thompson; Davis, Richey M.; Riffle, Judy S. (Hindawi, 2018-08-05)
Novel magnetite-ammonium bisphosphonate graft ionic copolymer nanocomplexes (MGICs) have been developed for potential drug delivery, magnetic resonance imaging, and hyperthermia applications. The complexes displayed relatively uniform sizes with narrow size distributions upon self-assembly in aqueous media, and their sizes were stable under simulated physiological conditions for at least 7 days. The anticancer drugs, cisplatin and carboplatin, were loaded into the complexes, and sustained release of both drugs was observed. The transverse NMR relaxivities (s) of the complexes were 244 s−1 (mM Fe)−1 which is fast compared to either the commercial T2-weighted MRI agent Feridex IV® or our previously reported magnetite-block ionomer complexes. Phantom MRI images of the complexes demonstrated excellent negative contrast effects of such complexes. Thus, the bisphosphonate-bearing MGICs could be promising candidates for dual drug delivery and magnetic resonance imaging. Moreover, the bisphosphonate MGICs generate heat under an alternating magnetic field of 30 kA·m−1 at 206 kHz. The temperature of the MGIC dispersion in deionized water increased from 37 to 41°C after exposure to the magnetic field for 10 minutes, corresponding to a specific absorption rate of 77.0 W·g−1. This suggests their potential as hyperthermia treatment agents as well as the possibility of temperature-dependent drug release, making MGICs more versatile in potential drug delivery applications.
Biodegradable Poly(Lactic Acid) Nanocomposites for Fused Deposition Modeling 3D Printing
Bardot, Madison; Schulz, Michael D. (MDPI, 2020-12-21)
3D printing by fused deposition modelling (FDM) enables rapid prototyping and fabrication of parts with complex geometries. Unfortunately, most materials suitable for FDM 3D printing are non-degradable, petroleum-based polymers. The current ecological crisis caused by plastic waste has produced great interest in biodegradable materials for many applications, including 3D printing. Poly(lactic acid) (PLA), in particular, has been extensively investigated for FDM applications. However, most biodegradable polymers, including PLA, have insufficient mechanical properties for many applications. One approach to overcoming this challenge is to introduce additives that enhance the mechanical properties of PLA while maintaining FDM 3D printability. This review focuses on PLA-based nanocomposites with cellulose, metal-based nanoparticles, continuous fibers, carbon-based nanoparticles, or other additives. These additives impact both the physical properties and printability of the resulting nanocomposites. We also detail the optimal conditions for using these materials in FDM 3D printing. These approaches demonstrate the promise of developing nanocomposites that are both biodegradable and mechanically robust.
Bulk and interfacial interactions between hydroxypropyl-cellulose and bile salts: Impact on the digestion of emulsified lipids
Zornjak, Jennifer; Liu, Jianzhao; Esker, Alan R.; Lin, Tiantian; Fernández-Fraguas, Cristina (2020-09)
Hydroxypropyl-cellulose (HPC) is a surface-active, non-digestible polysaccharide, commonly used in food emulsions as thickener and/or emulsifier. Due to these dual characteristics, HPC is a potential ingredient to modulate lipid digestion. Since bile salts (BS) are key players during lipid digestion, the aim of this work was to investigate the impact that interactions of HPC with BS has on the digestion of emulsified lipids. We studied the effect of two BS species differing in bile-acid moiety, sodium-taurocholate (NaTC) and sodium-taurodeoxycholate (NaTDC). A Quartz-Crystal-Microbalance (QCM-D) was used to evaluate HPC-BS interfacial interactions during the sequential and simultaneous adsorption of both components at a hydrophobic surface, while microDifferential-Scanning-Calorimetry was used to examine bulk interactions. In vitro lipid digestion was studied by using a pH-stat method. Results showed that, under fed-state conditions, NaTDC micelles were more effective at displacing a pre-adsorbed HPC layer from the surface than NaTC monomers. Nevertheless, HPC was resistant to complete displacement by both BS. Additionally, HPC was more susceptible to interact with NaTDC in the bulk, compared to NaTC, which made the adsorption more competitive for NaTDC. The reduced amount of free NaTDC in solution could explain the delayed lipolysis shown by HPC-stabilized emulsions when NaTDC was used to simulate duodenal conditions. These findings show that the delay of lipid digestion by HPC is due to the combined effect of HPC-BS interfacial and bulk interactions, with BS-binding in solution mostly contributing to this effect, and the BS molecular and micellar structure playing essential roles on both situations.
Double helical conformation and extreme rigidity in a rodlike polyelectrolyte
Wang, Ying; He, Yadong; Yu, Zhou; Gao, Jianwei; ten Brinck, Stephanie; Slebodnick, Carla; Fahs, Gregory B.; Zanelotti, Curt J.; Hegde, Maruti; Moore, Robert Bowen; Ensing, Bernd; Dingemans, Theo J.; Qiao, Rui; Madsen, Louis A. (Nature Publishing Group, 2019-02-18)
The ubiquitous biomacromolecule DNA has an axial rigidity persistence length of ~50 nm, driven by its elegant double helical structure. While double and multiple helix structures appear widely in nature, only rarely are these found in synthetic non-chiral macromolecules. Here we report a double helical conformation in the densely charged aromatic polyamide poly(2,2′-disulfonyl-4,4′-benzidine terephthalamide) or PBDT. This double helix macromolecule represents one of the most rigid simple molecular structures known, exhibiting an extremely high axial persistence length (~1 micrometer). We present X-ray diffraction, NMR spectroscopy, and molecular dynamics (MD) simulations that reveal and confirm the double helical conformation. The discovery of this extreme rigidity in combination with high charge density gives insight into the self-assembly of molecular ionic composites with high mechanical modulus (~ 1 GPa) yet with liquid-like ion motions inside, and provides fodder for formation of other 1D-reinforced composites. © 2019, The Author(s).
Exceptional capacitive deionization rate and capacity by block copolymer–based porous carbon fibers
Liu, Tianyu; Serrano, Joel; Elliott, John; Yang, Xiaozhou; Cathcart, William; Wang, Zixuan; He, Zhen; Liu, Guoliang (American Association for the Advancement of Science, 2020-04-17)
Capacitive deionization (CDI) is energetically favorable for desalinating low-salinity water. The bottlenecks of current carbon-based CDI materials are their limited desalination capacities and time-consuming cycles, caused by insufficient ion-accessible surfaces and retarded electron/ion transport. Here, we demonstrate porous carbon fibers (PCFs) derived from microphase-separated poly(methyl methacrylate)-block-polyacrylonitrile (PMMA-b-PAN) as an effective CDI material. PCF has abundant and uniform mesopores that are interconnected with micropores. This hierarchical porous structure renders PCF a large ion-accessible surface area and a high desalination capacity. In addition, the continuous carbon fibers and interconnected porous network enable fast electron/ion transport, and hence a high desalination rate. PCF shows desalination capacity of 30 mgNaCl g⁻¹ PCF and maximal time-average desalination rate of 38.0 mgNaCl g⁻¹ PCF min⁻¹, which are about 3 and 40 times, respectively, those of typical porous carbons. Our work underlines the promise of block copolymer–based PCF for mutually high-capacity and high-rate CDI.
Fabrication and characterization of PLGA nanoparticles encapsulating large CRISPR–Cas9 plasmid
Jo, Ami; Ringel-Scaia, Veronica M.; McDaniel, Dylan K.; Thomas, Cassidy A.; Zhang, Rui; Riffle, Judy S.; Allen, Irving C.; Davis, Richey M. (2020-01-20)
Background The clustered regularly interspaced short palindromic repeats (CRISPR) and Cas9 protein system is a revolutionary tool for gene therapy. Despite promising reports of the utility of CRISPR–Cas9 for in vivo gene editing, a principal problem in implementing this new process is delivery of high molecular weight DNA into cells. Results Using poly(lactic-co-glycolic acid) (PLGA), a nanoparticle carrier was designed to deliver a model CRISPR–Cas9 plasmid into primary bone marrow derived macrophages. The engineered PLGA-based carriers were approximately 160 nm and fluorescently labeled by encapsulation of the fluorophore 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS pentacene). An amine-end capped PLGA encapsulated 1.6 wt% DNA, with an encapsulation efficiency of 80%. Release studies revealed that most of the DNA was released within the first 24 h and corresponded to ~ 2–3 plasmid copies released per nanoparticle. In vitro experiments conducted with murine bone marrow derived macrophages demonstrated that after 24 h of treatment with the PLGA-encapsulated CRISPR plasmids, the majority of cells were positive for TIPS pentacene and the protein Cas9 was detectable within the cells. Conclusions In this work, plasmids for the CRISPR–Cas9 system were encapsulated in nanoparticles comprised of PLGA and were shown to induce expression of bacterial Cas9 in murine bone marrow derived macrophages in vitro. These results suggest that this nanoparticle-based plasmid delivery method can be effective for future in vivo applications of the CRISPR–Cas9 system.
Homogeneous nanodiscs of native membranes formed by stilbene-maleic-acid copolymers
Esmaili, Mansoore; Brown, Chanelle J.; Shaykhutdinov, Rustem; Acevedo-Morantes, Claudia; Wang, Yong Liang; Wille, Holger; Gandour, Richard D.; Turner, S. Richard; Overduin, Michael (2020-08-28)
Methylstilbene-alt-maleic acid copolymers spontaneously convert biological membranes into bilayer discs with similar to 20 nm diameters. This readily functionalizable class of copolymers has the compositional homogeneity, hydrophobicity, dynamics, and charge that may help to achieve optimal structural resolution, membrane dissolution, stability, and broad utility.
Imidazole-containing triblock copolymers with a synergy of ether and imidazolium sites
Jangu, Chainika; Wang, Jing-Han Helen; Wang, Dong; Fahs, Gregory B.; Heflin, James R.; Moore, Robert Bowen; Colby, Ralph H.; Long, Timothy E. (The Royal Society of Chemistry, 2015-03-06)
Reversible addition-fragmentation chain transfer (RAFT) polymerization enabled the synthesis of well-defined A-BC-A triblock copolymers containing a synergy of pendant ether and imidazolium sites. The soft central BC block comprises low Tg di(ethylene glycol) methyl ether methacrylate (DEGMEMA) and 1-(4-vinylbenzyl) methyl imidazolium units. External polystyrene blocks provide mechanical reinforcement within a nanoscale morphology. Dynamic mechanical analysis (DMA) of the A-BC-A triblock copolymers exhibited a plateau region, which suggested the formation of a microphase-separated morphology. Atomic force microscopy (AFM) and small angle X-ray scattering (SAXS) collectively probed the morphology of the A-BC-A triblock copolymers, revealing long-range order at the nanoscale dimensions. Dielectric relaxation spectroscopy (DRS) examined the ion-transport properties of ionomeric A-BC-A triblock copolymers and random copolymers with different compositions. The role of morphology was demonstrated with block copolymer nanoscale structures providing superior ionic conductivity and mechanical performance compared to random copolymers. Under a 4 V direct current (DC) applied voltage, electromechanical transducers derived from these triblock copolymer membranes with added ionic liquid showed superior actuation performance compared to a benchmark Nafion[registered sign] membrane, suggesting potential for ionic polymer device applications. This was attributed to optimum modulus, improved ionic conductivity, and microphase-separated morphology of triblock copolymers.
Imparting functional variety to cellulose ethers via olefin cross-metathesis
Dong, Yifan; Edgar, Kevin J. (The Royal Society of Chemistry, 2015-04-09)
Olefin cross-metathesis is a valuable new approach for imparting functional variety to cellulose ethers. Starting from commercially available ethyl cellulose, terminally unsaturated alkyl groups were appended as metathesis handles by reaction with allyl chloride, 5-bromo-1-pentene, 7-bromo-1-heptene and 11-bromo-1-undecene, employing sodium hydride catalyst. These olefin-terminal ethyl cellulose derivatives were then subjected to olefin cross-metathesis with a variety of electron-poor olefin substrates, including acrylic acid and acrylate esters under optimized conditions (5–10 mol% Hoveyda-Grubbs’ 2nd generation catalyst, 37 °C, 2 h). The effects of varying the length of the ω-unsaturated alkyl handle, and of the solvent systems used were evaluated. Ethyl cellulose containing a pent-4-enyl substituent performed best in cross metathesis reactions and a hept-6-enyl substituent gave similarly good results. Ethyl cellulose with allyl substituents gave low to moderate metathesis conversion (<50%), possibly due to steric effects and the proximity of the ether oxygen to the terminal olefin. Interestingly, longer tethers (undec-10-enyl) gave high conversions (up to 90%) but relatively slow reactions (ca. 12 h needed for high conversion). While limited in this study by the relatively low DS (OH) of the starting commercial ethyl cellulose materials, this methodology has strong promise for introduction of diverse functionality to cellulose ethers in chemospecific and mild fashion, enabling amorphous solid dispersion and other applications.
Influence of nucleobase stoichiometry on the self-assembly of ABC triblock copolymers
Zhang, Keren; Talley, Samantha J.; Yu, Ya Peng; Moore, Robert Bowen; Murayama, Mitsuhiro; Long, Timothy E. (Royal Society of Chemistry, 2016-05-11)
ABC triblock copolymers bearing adenine- and thymine-functionalized external blocks self-assembled into long-range, ordered lamellar microphase-separated morphologies on non-patterned substrates. Intermolecular hydrogen bonding formed thymine–adenine triplets and promoted self-assembly into well-defined lamellae consisting of poly(n-butyl acrylate) soft domains and complementary nucleobase hard domains, while thymine–adenine duplets contributed to superior mechanical properties.
Isocyanate- and solvent-free synthesis of melt processible polyurea elastomers derived from urea as a monomer
White, B. Tyler; Migliore, John M.; Mapesa, Emmanuel U.; Wolfgang, Josh D.; Sangoro, Joshua; Long, Timothy E. (2020-05-18)
Polyurea elastomers are utilized for a myriad of applications ranging from coatings and foams to dielectric materials for capacitors and actuators. However, current synthetic methods for polyureas rely on highly reactive isocyanates, solvents, and catalysts, which collectively pose serious safety considerations. This report details the synthesis and characterization of melt processible, poly(tetramethylene oxide) (PTMO)-based segmented polyurea elastomers utilizing an isocyanate-, solvent-, and catalyst-free approach. Dynamic mechanical analysis and differential scanning calorimetry suggested microphase separation between the hard and soft segments. Tensile analysis revealed high strain at break for all segmented copolymers between 340 and 770%, and tunable modulus between 0.76 and 29.5 MPa. Dielectric spectroscopy revealed that the composition containing 20 wt% hard segment offered the highest permittivity at 10.6 (1 kHz, 300 K) of the segmented copolymers, indicating potential as a dielectric elastomer.
Non-isocyanate poly(amide-hydroxyurethane)s from sustainable resources
Zhang, Keren; Nelson, Ashley M.; Talley, Samantha J.; Chen, Mingtao; Margaretta, Evan; Hudson, Amanda G.; Moore, Robert Bowen; Long, Timothy E. (Royal Society of Chemistry, 2016-05-19)
A two-step synthesis of epoxidation and carbonation afforded a hetero-functional AB monomer with cyclic carbonate and methyl ester (CC-ME) using plant oil-based methyl 9-decenoate and CO2. A unprecedented one-pot synthetic platform of CC-ME with 1,12-diaminododecane and poly(tetramethylene oxide) (PTMO)-based polyether diamine allowed synthesis of both nonsegmented poly(amide-hydroxyurethane) (PA12HU) and segmented PA12HU-PTMOs with varying polyether contents. 1H NMR spectroscopy confirmed complete conversion of cyclic carbonates and methyl esters to hydroxyurethanes and amides, respectively. Thermal analysis revealed distinctive thermal stability and transitions of PA12HU and PA12HU-PTMOs compared to their precursors and model oligomers. PA12HU and PA12HU-PTMOs were melt compression molded into semicrystalline, free-standing films, except for PA12HU-PTMO100 with 100% polyether diamine. PA12HU-PTMO100 was a viscous liquid with a glass transition temperature (Tg) of −64 °C and zero-shear melt viscosity of 449 Pa s. PA12HU formed a semicrystalline, rigid film with Tg of 11 °C. Polyether incorporation afforded creasable PA12HU-PTMO films with broad glass transitions near −50 °C. Thermal and thermomechanical analysis revealed significant phase-mixing of the hard and soft segments from annealed PA12HU-PTMO films. Polyether soft segments mixed with the amorphous hard segments, forming a miscible soft phase; crystallizable hard segments with ordered hydrogen bonding formed a hard phase. Surface morphological analysis of each PA12HU-PTMO film displayed ribbon-like, hard domains with composition-dependent aspect ratios. PA12HU-PTMOs exhibited higher moisture uptake than traditional thermoplastic polyurethane (TPU) due to resultant hydroxyls. Variable temperature FTIR spectroscopy demonstrated that ordered hydrogen bonding in the crystalline domains was disrupted or dissociated as the crystallites melted. Although tensile strength of segmented PA12HU-PTMOs proved lower than traditional polyurethanes due to phase-mixing, these compositions represent the first examples of film-forming, linear isocyanate-free polyurethanes with mechanical integrity and processability.
Novel Electrospun Pullulan Fibers Incorporating Hydroxypropyl-β-Cyclodextrin: Morphology and Relation with Rheological Properties
Poudel, Deepak; Swilley-Sanchez, Sarah; O'Keefe, Sean F.; Matson, John B.; Long, Timothy E.; Fernández-Fraguas, Cristina (MDPI, 2020-10-31)
Fibers produced by electrospinning from biocompatible, biodegradable and naturally occurring polymers have potential advantages in drug delivery and biomedical applications because of their unique functionalities. Here, electrospun submicron fibers were produced from mixtures containing an exopolysaccharide (pullulan) and a small molecule with hosting abilities, hydroxypropyl-β-cyclodextrin (HP-β-CD), thus serving as multi-functional blend. The procedure used water as sole solvent and excluded synthetic polymers. Rheological characterization was performed to evaluate the impact of HP-β-CD on pullulan entanglement concentration (C_E); the relationship with electrospinnability and fiber morphology was investigated. Neat pullulan solutions required three times C_E (~20% w/v pullulan) for effective electrospinning and formation of bead-free nanofibers. HP-β-CD (30% w/v) facilitated electrospinning, leading to the production of continuous, beadless fibers (average diameters: 853-1019 nm) at lower polymer concentrations than those required in neat pullulan systems, without significantly shifting the polymer C_E. Rheological, Differential Scanning Calorimetry (DSC) and Dynamic Light Scattering (DLS) measurements suggested that electrospinnability improvement was due to HP-β-CD assisting in pullulan entanglement, probably acting as a crosslinker. Yet, the type of association was not clearly identified. This study shows that blending pullulan with HP-β-CD offers a platform to exploit the inherent properties and advantages of both components in encapsulation applications.
Nucleobase-functionalized acrylic ABA triblock copolymers and supramolecular blends
Zhang, Keren; Aiba, Motohiro; Fahs, Gregory B.; Hudson, Amanda G.; Chiang, William D.; Moore, Robert Bowen; Ueda, Mitsuru; Long, Timothy E. (The Royal Society of Chemistry, 2015-01-30)
Reversible addition-fragmentation chain transfer (RAFT) polymerization afforded the unprecedented synthesis of well-defined acrylic ABA triblock copolymers with nucleobase-functionalized external blocks and a central poly(n-butyl acrylate) (PnBA) block. Size exclusion chromatography (SEC) confirmed the molecular weight and molecular weight distribution of the central block. 1H NMR spectroscopy revealed the successful chain extension of the PnBA macro-chain transfer agent (CTA) using adenine or thymine-functionalized acrylic monomers. The acrylic monomer with a flexible spacer to the pendant nucleobases promoted intermolecular recognition of nucleobases and long range segmental motion of polymer main chains. The external block glass transition temperatures (Tg's) of thymine (T) and adenine (A) functionalized blocks were 52 °C and 76 °C, respectively. Thermomechanical and morphological analysis revealed the effect of processing conditions on self-assembly and microphase-separated morphology of nucleobase-functionalized ABA copolymers. Thymine and adenine-functionalized ABA triblocks formed a thermodynamically stable, hydrogen-bonded complex upon blending. The supramolecular blend exhibited a cylindrical microphase-separated morphology with an extended plateau window compared to the individual block copolymers. The complementary hydrogen bonding between adenine and thymine formed a thermally labile, physically crosslinked, network that exhibited enhanced mechanical performance with melt processability. Thus, these ABA nucleobase-functionalized block copolymers demonstrate potential as thermoplastic elastomers for hot melt adhesives and coatings.
Peptide-based hydrogen sulphide-releasing gels
Carter, Jennifer M.; Qian, Yun; Foster, Jeffrey C.; Matson, John B. (The Royal Society of Chemistry, 2015-07-20)
An aromatic peptide amphiphile was designed for delivery of the signaling gas H2S. The peptide self-assembled in water into nanofibers that gelled upon charge screening. The non-toxic gel slowly released H2S over 15 hours, and the presence of H2S in endothelial cells was verified using a fluorescent H2S probe.
Phosphonium-containing diblock copolymers from living anionic polymerization of 4-diphenylphosphino styrene
Schultz, Alison R.; Fahs, Gregory B.; Jangu, Chainika; Chen, Mingtao; Moore, Robert Bowen; Long, Timothy E. (The Royal Society of Chemistry, 2015-11-20)
Living anionic polymerization of 4-diphenylphosphino styrene (DPPS) achieved well-defined homopolymers, poly(DPPS-b-S) styrenic block copolymers, and poly(I-b-DPPS) diene-based diblock copolymers with predictable molecular weights and narrow polydispersities. In situ FTIR spectroscopy monitored the anionic polymerization of DPPS and tracked monomer consumption for kinetic analysis. Post-alkylation enabled controlled placement of phosphonium functionality in poly(I-b-DPPS) diblock copolymers, producing well-defined phosphonium-containing block copolymers with low degrees of compositional heterogeneity. Incorporating phosphonium charge disrupted the lamellar bulk morphology of the neutral diblock precursor and provided morphologies with interdigitated packing of alkyl chains on the phosphonium cation.
Porous organic materials offer vast future opportunities
Liu, Tianyu; Liu, Guoliang (2020-10-02)
In light of the surging research on porous organic materials, we herein discuss the key issues of their porous structures, surface properties, and end functions. We also present an outlook on emerging opportunities, new applications, and data science-assisted materials discovery.
Quadruple Hydrogen Bond-Containing A-AB-A Triblock Copolymers: Probing the Influence of Hydrogen Bonding in the Central Block
Liu, Boer; Chen, Xi; Spiering, Glenn A.; Moore, Robert Bowen; Long, Timothy E. (MDPI, 2021-08-03)
This work reveals the influence of pendant hydrogen bonding strength and distribution on self-assembly and the resulting thermomechanical properties of A-AB-A triblock copolymers. Reversible addition-fragmentation chain transfer polymerization afforded a library of A-AB-A acrylic triblock copolymers, wherein the A unit contained cytosine acrylate (CyA) or post-functionalized ureido cytosine acrylate (UCyA) and the B unit consisted of n-butyl acrylate (nBA). Differential scanning calorimetry revealed two glass transition temperatures, suggesting microphase-separation in the A-AB-A triblock copolymers. Thermomechanical and morphological analysis revealed the effects of hydrogen bonding distribution and strength on the self-assembly and microphase-separated morphology. Dynamic mechanical analysis showed multiple tan delta (δ) transitions that correlated to chain relaxation and hydrogen bonding dissociation, further confirming the microphase-separated structure. In addition, UCyA triblock copolymers possessed an extended modulus plateau versus temperature compared to the CyA analogs due to the stronger association of quadruple hydrogen bonding. CyA triblock copolymers exhibited a cylindrical microphase-separated morphology according to small-angle X-ray scattering. In contrast, UCyA triblock copolymers lacked long-range ordering due to hydrogen bonding induced phase mixing. The incorporation of UCyA into the soft central block resulted in improved tensile strength, extensibility, and toughness compared to the AB random copolymer and A-B-A triblock copolymer comparisons. This study provides insight into the structure-property relationships of A-AB-A supramolecular triblock copolymers that result from tunable association strengths.
Size dependent ion-exchange of large mixed-metal complexes into Nafion® membranes
Naughton, Elise M.; Zhang, Mingqiang; Troya, Diego; Brewer, Karen J.; Moore, Robert Bowen (The Royal Society of Chemistry, 2015-08-18)
Perfluorosulfonate ionomers have been shown to demonstrate a profound affinity for large cationic complexes, and the exchange of these ions may be used to provide insight regarding Nafion® morphology by contrasting molecular size with existing morphological models. The trimetallic complex, [{(bpy)2Ru(dpp)}2RhBr2]5+, is readily absorbed by ion-exchange into Na+-form Nafion® membranes under ambient conditions. The dimensions of three different isomers of the trimetallic complex were found to be: 23.6 Å × 13.3 Å × 10.8 Å, 18.9 Å × 18.0 Å × 13.7 Å, and 23.1 Å × 12.0 Å × 11.4 Å, yielding an average molecular volume of 1.2 × 103 Å3. At equilibrium, the partition coefficient for the ion-exchange of the trimetallic complex into Nafion® from a DMF solution was found to be 5.7 × 103. Furthermore, the total cationic charge of the exchanged trimetallic complexes was found to counterbalance 86 ± 2% of the anionic SO3− sites in Nafion®. The characteristic dimensions of morphological models for the ionic domains in Nafion® were found to be comparable to the molecular dimensions of the large mixed-metal complexes. Surprisingly, SAXS analysis indicated that the complexes absorbed into the ionic domains of Nafion® without significantly changing the ionomer morphology. Given the profound affinity for absorption of these large cationic molecules, a more open-channel model for the morphology of perfluorosulfonate ionomers is more reasonable, in agreement with recent experimental findings. In contrast to smaller monometallic complexes, the time dependent uptake of the large trimetallic cations was found to be biexponential. This behavior is attributed to a fast initial ion-exchange process on the surface of the membrane, accompanied by a slower transport-limited ion-exchange for exchange sites that are buried further in the ionomer matrix.
Strong graphene oxide nanocomposites from aqueous hybrid liquid crystals
Hegde, Maruti; Yang, Lin; Vita, Francesco; Fox, Ryan J.; van de Watering, Renee; Norder, Ben; Lafont, Ugo; Francescangeli, Oriano; Madsen, Louis A.; Picken, Stephen J.; Samulski, Edward T.; Dingemans, Theo J. (2020-02-11)
Combining polymers with small amounts of stiff carbon-based nanofillers such as graphene or graphene oxide is expected to yield low-density nanocomposites with exceptional mechanical properties. However, such nanocomposites have remained elusive because of incompatibilities between fillers and polymers that are further compounded by processing difficulties. Here we report a water-based process to obtain highly reinforced nanocomposite films by simple mixing of two liquid crystalline solutions: a colloidal nematic phase comprised of graphene oxide platelets and a nematic phase formed by a rod-like high-performance aramid. Upon drying the resulting hybrid biaxial nematic phase, we obtain robust, structural nanocomposites reinforced with graphene oxide.

Browse

Browsing Department of Chemistry by Department "Macromolecules Innovation Institute"

Results Per Page

Sort Options