Scholarly Works, Mining and Minerals Engineering
Permanent URI for this collection
Research articles, presentations, and other scholarship
Browse
Browsing Scholarly Works, Mining and Minerals Engineering by Subject "0904 Chemical Engineering"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
- Acid Leaching of Rare Earth Elements from Coal and Coal Ash: Implications for Using Fluidized Bed Combustion To Assist in the Recovery of Critical MaterialsHonaker, Rick; Zhang, Wencai; Werner, Joshua (American Chemical Society, 2019-07-18)High temperature pretreatment of coal-based mineral matter in an oxidizing environment significantly enhances the leaching characteristics of rare earth elements (REEs). A research study has found that the temperatures used in fluidized-bed combustion (FBC) of coal to produce electricity are near optimum for pre-treating the associated mineral matter prior to leaching to maximize the recovery of critical materials. Tests were performed on representative samples collected from preparation plants treating West Kentucky No. 13, Illinois No. 6, and Fire Clay coal seam sources as well as fly ash and bed ash samples from two FBC power plants. Acid leaching tests using 1.2M HCl at 75℃ were performed on both the coal and the FBC ash samples. Prior to leaching, the coal samples were pretreated at temperatures of 600℃, 750℃, and 900℃ in an oxidizing environment to study the effect on leaching characteristics. The results showed that pretreatment at 600℃ for 2 hours resulted in a significant increase in REE recovery from a range of 20-40% to about 80% for all coal sources. The leaching kinetics are characterized by a quick release of rare earth elements within the first few minutes of the process. For the West Kentucky No. 13 coal source, about 75% of REEs were leached in the first 15 min from the 1.4-1.8 specific gravity (SG) fraction that was calcined at 600℃. Additionally, the leaching kinetics of the major contaminant, i.e., Fe, were much lower than the REEs, which significantly benefits the efficiency of leaching and the downstream upgrading processes. REE leaching characteristics of the FBC ash samples were similar to that of the calcined coals. Mineralogy characterization showed that the degree of crystallinity for both the calcined coal and FBC samples were similar to the original associated mineral matter, which provided evidence for the advantage of using the FBC by- products as REE feedstocks over pulverized coal boilers that utilize temperatures greater than 1200℃. These findings were used to develop a conceptual flowsheet that incorporates FBC technology and its typical combustion environment to enhance the feasibility of recovering critical materials from coal-based sources.
- Flotation separation of scheelite from calcite using mixed collectorsYan, Weiping; Liu, Cheng; Ai, Guanghua; Feng, Qiming; Zhang, Wencai (Elsevier, 2017-12)Flotation separation of scheelite from calcite is difficult due to the similarities in their surface properties. In this work, the flotation behavior of scheelite and calcite using oxidized paraffin soap(OPS), benzohydroxamic acid(BHA) and the mixed OPS/BHA collectors was investigated through micro-flotation experiments. The flotation results of single mineral experiments demonstrated a higher selectivity for the flotation of scheelite from calcite at pH 9 than individual OPS and BHA when using water glass as depressant. In order to probe the validity of the findings, mixed binary minerals experiments, contact angle and zeta potential experiments were also carried out successfully.
- Study on the activation mechanism of lead ions in wolframite flotation using benzyl hydroxamic acid as the collectorLiu, Cheng; Zhang, Wencai; Song, Shaoxian; Li, Hongqiang (Elsevier, 2019-09)The activation mechanism of Pb(II) on the flotation of wolframite was systematically investigated. Micro-flotation test results showed that Pb(II) effectively improved the flotation of wolframite in the presence of benzyl hydroxamic acid (BHA). Maximum floatability of wolframite was achieved at approximately pH 8.5. Adsorption of the hydrolyzed species of Pb(II) occurred at this pH value, which provided more activated sites on the wolframite surface. As such, BHA-Pb complexes were formed on the wolframite surface, which increased the BHA adsorption. In addition, BHA-Pb complexes were also formed in solution, which replaced the Fe and interacted with the Mn on the wolframite surface. These findings were proved by the results of zeta-potential measurements, adsorption measurements, solution chemistry calculations, Fourier transform infrared spectroscopy (FTIR) analysis, and X-ray photoelectron spectroscopy (XPS) characterization.