Tailoring Reactivity, Architecture and Properties of High Performance Polyimides: From Additive Manufacturing to Graft Copolymers

Additive manufacturing provides unmatched control and diversity over structural design of polymeric, ceramic and metallic parts. Nevertheless, until recently, the toolbox of polymeric feedstocks for light based additive manufacturing limited employment of printed parts for applications necessitating high thermomechanical performance. Development of synthetic pathways permitted the first additive manufacturing of high performance poly(amide imides) via ultraviolet assisted direct ink write (UV-DIW) printing. Precursor resins exhibited prerequisite rheology and reactivity for UV-DIW and produced organogels were well-defined and self-supporting. Thermal treatment induced drying and imidization of the precursor organogels to form the desired poly(amide imide) structures. During post-processing the parts displayed linear isotropic shrinkage as low as 26% and exhibited competitive thermomechanical properties. Following expansion of the high performance backbones available for additive manufacturing, simplification of synthetic rigors was undertaken. This investigation facilitated the evolution of the first photocurable and processable small molecule polyimide precursors. These supramolecular carboxylate ammonium nylon salts, coined polysalts, allowed for additive manufacturing of both high performance polyimides and polyetherimides using vat photopolymerization (VP). The use of small molecule precursors over previously investigated polymeric precursors displayed much lower solution viscosities yielding reduction of organic solvent loading, inducing lower overall shrinkage. Polysalts provide a stimulating platform for rapid and facile printing of high performance polyimides in the future. Surveying the excellent carbonization behavior for aromatic polyimides spurred translation of known 2D protocols to post-processing of printed polyimides. Applying pyrolysis methodologies to parts produced using VP and UV-DIW induced efficient carbonization at 1000 °C. Remarkably, the carbonized parts retained structure and did not display cracks or pore formation. Raman spectroscopy indicated production of disordered carbon via the utilized pyrolysis protocol, in line with literature on carbonization of PMDA-ODA polyimide at 1000 °C. Electrical testing indicated production of conductive materials following pyrolysis, with carbonization temperature modulating the performance. The excellent thermal stability, transport properties, and known mechanical performance of carbonaceous materials may enable application of these printed objects in customized electronics and aerospace environments. Exploration of drop-in monomeric units permitted a multi-pronged research program into augmentation of mechanical, rheological and transport properties of high performance polyetherimides (PEIs). Installation of sodium or lithium substituted disulfonated monomers via classical two-step polyimide synthesis afforded two series of sulfonated polyetherimides (sPEI). The sPEIs exhibited robust thermal properties, with high sulfonate mol% inducing Tg > 300 °C. X-ray scattering experiments revealed the development of domains via inclusion of the sulfonate moieties, with low mol% producing larger domain spacing. The larger domains present in the low mol% sPEIs yielded improved ionic liquid uptake within 2 d, yielding improved ionic conductivities at room temperature relative to high mol% samples. The observed conductivities indicated potential of the sPEIs as battery electrolytes, but further ionic liquid incorporation is required for competitive performance. Development of a poly(ethylene glycol) (PEG) bearing macromonomer facilitated synthesis of PEIs and PI graft copolymers. When coupled with 4,4'-(4,4'-isopropylidene-diphenoxy)diphthalic anhydride (BPADA) and meta-phenylene diamine (mPD), the PEG-grafted materials exhibited signs of phase mixing at low mol% incorporation of macromonomer, with a single observable Tg depressed from neat BPADA-mPD. Doping of the PEI-g-PEG with lithium salts allowed for production of polymeric films that displayed good ionic conductivities at room temperatures. Extension of the PEG macromonomer into fully aromatic PIs yielded phase separated materials even at modest loadings, >2.5 mol%. The formed PEG-g-PMDA-ODA contained thermally stable PI main-chains with thermally labile graft chains, which when thermally treated induced facile quantitative PEG removal. Remarkably, the thermally treated materials retained flexibility, even at >60 wt.% PEG removal. Further investigations aim to explore use of novel PEIs in energy storage as well as low density and dielectric materials.