Multi-Scale Characterization of Mining-Induced Deformation Using Radar
Files
TR Number
Date
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
The theme of this dissertation is the quantitative characterization of mining-induced deformation using radar methods. Underground excavation can produce fractures that reduce roof stability and surface deformation that may affect mine-related or public infrastructure. However, these responses are difficult to characterize because fractures are concealed within the rock mass and surface deformation may extend across large areas. The principal contribution of this dissertation is the development of quantitative radar-based approaches that extend beyond detecting deformation to measuring its geometry, magnitude, spatial distribution, and evolution across multiple scales. Ground-penetrating radar (GPR) data were acquired on the roof of an underground salt mine to detect fractures concealed within the rock mass. Radar observations were calibrated and validated using fractures logged in drillholes, enabling quantitative estimates of fracture location and aperture. GPR detected fractures with apertures as small as approximately 1 mm and mapped substantial variations in aperture along individual fractures. The results demonstrate that GPR can noninvasively quantify mining-induced fractures beyond the discrete locations sampled by drilling. A dense grid of GPR profiles was subsequently used to reconstruct 15 laterally continuous fractures as three-dimensional surfaces with measured aperture. The fractures are shallowly dipping, approximately planar extensional features, with fracture intensity greatest near the mine roof and decreasing upward into the rock mass. Fracture size and aperture exhibit substantial variability and do not scale according to a simple linear elastic fracture mechanics model. Although the number of fractures limits population-scale statistical inference, the measurements provide rare field-based three-dimensional constraints on fracture geometries and network statistics commonly inferred from lower-dimensional observations or numerical models. Interferometric synthetic aperture radar (InSAR) was used to characterize surface deformation across the southwest Wyoming trona mining district. Ascending and descending Sentinel-1 observations spanning approximately 19 months were combined to estimate vertical displacement. Six subsidence features and one apparent-uplift feature were identified, with peak cumulative subsidence ranging from 62 to 198 mm. The features differed substantially in spatial extent, geometry, cumulative displacement volume, temporal evolution, tilt, and curvature. Longwall-associated features were generally compact, whereas room-and-pillar-associated features were more elongated. However, variability among features associated with the same mining method shows that mining method alone did not determine the surface response. These results show that displacement magnitude alone does not adequately characterize mining-related surface deformation. Together, these studies demonstrate the ability of radar methods to quantitatively characterize mining-induced deformation from millimeter-scale fracture opening to kilometer-scale surface displacement. These complementary approaches provide field-based constraints on the geomechanical response to underground excavation and measurements relevant to mine safety and surface infrastructure.