VTechWorks staff will be away for the Thanksgiving holiday beginning at noon on Wednesday, November 22, through Friday, November 24, and will not be replying to requests during this time. Thank you for your patience, and happy holidays!

Show simple item record

dc.contributor.authorAtkins, Brad Matthewen_US
dc.date.accessioned2014-10-31T08:00:21Z
dc.date.available2014-10-31T08:00:21Z
dc.date.issued2014-10-30en_US
dc.identifier.othervt_gsexam:3990en_US
dc.identifier.urihttp://hdl.handle.net/10919/50648
dc.description.abstractMany landing sites of scientific interest on Mars including most of the Southern Hemisphere at elevations above 2km Mars Orbiter Laser Altimeter reference are inaccessible due to current limitations in precision entry guidance and payload deceleration. Precision guidance and large payload deceleration is challenging due to the thin Martian atmosphere, large changes in free stream conditions during entry, and aerothermal and aerodynamic instability concerns associated with control systems with direct external flow field interaction. Such risks have descoped past Mars missions to unguided entry with the exception of Mars Science Laboratory's (MSL) bank angle guidance. Consequently, prior to MSL landing ellipses were on the order of 100's of km. MSL has approached the upper limit of payload deceleration capability for rigid, blunt body sphere cone aeroshells used on all successful Mars entry missions. Hypersonic Inflatable Aerodynamic Decelerators (HIADS) are in development for larger payload deceleration capability through inflated aeroshell diameters greater than rigid aeroshells constrained by the launch rocket diameter, but to date there has been limited dynamics, control, and guidance development for their use on future missions. This dissertation develops internal moving mass actuator (IMMA) control systems for improving Mars precision entry guidance of rigid capsules and demonstrating precision guidance capability for HIADs. IMMAs provide vehicle control moments without direct interaction with the external flow field and can increase payload mass delivered through reducing propellant mass for control and using portions of the payload for the IMMAs. Dynamics models for entry vehicles with rotation and translation IMMAs are developed. IMMA control systems using the models are developed for two NASA vehicle types: a 2.65 m, 602 kg Mars Phoenix-sized entry capsule and an 8.3 m, 5.9 metric ton HIAD approaching payload requirements for robotic precursor missions for future human missions. Linear Quadratic controllers with integral action for guidance command tracking are developed for translation and rotation IMMA configurations. Angle of attack and sideslip guidance laws are developed as an alternative to bank angle guidance for decoupling range and cross-range control for improved precision entry guidance. A new variant of the Apollo Earth return terminal guidance algorithm is implemented to provide the closed-loop angle of attack range control commands. Nonlinear simulations of the entire 8 degree of freedom closed-loop systems demonstrate precision guidance to nominal trajectories and final targets for off-nominal initial entry conditions for flight path angle, range, cross-range, speed and attitude. Mechanical power studies for IMMA motion show rotation IMMA require less total mechanical power than translation actuators, but both systems have low nominal mechanical power requirements (below 100 Watts). Precision guidance for both systems to terminal targets greater than 38 km down-range from an open-loop ballistic entry is shown for low mechanical power, low CM displacement, (< 4.5 in) and at low internal velocities (< 2 in/s) over significant dynamic pressure changes. The collective precision guidance results and low mechanical power requirements show IMMA based entry guidance control systems constitute a promising alternative to thruster based control systems for future Mars landers.en_US
dc.format.mediumETDen_US
dc.publisherVirginia Techen_US
dc.rightsThis Item is protected by copyright and/or related rights. Some uses of this Item may be deemed fair and permitted by law even without permission from the rights holder(s), or the rights holder(s) may have licensed the work for use under certain conditions. For other uses you need to obtain permission from the rights holder(s).en_US
dc.subjectMarsen_US
dc.subjectPrecision Entry Guidanceen_US
dc.subjectCapsulesen_US
dc.subjectHypersonic Inflatable Aerodynamic Deceleratorsen_US
dc.subjectAttitude Controlen_US
dc.subjectCenter of Mass Controlen_US
dc.subjectInternal Moving Mass Actuatorsen_US
dc.titleMars Precision Entry Vehicle Guidance Using Internal Moving Mass Actuatorsen_US
dc.typeDissertationen_US
dc.contributor.departmentAerospace and Ocean Engineeringen_US
dc.description.degreePHDen_US
thesis.degree.namePHDen_US
thesis.degree.leveldoctoralen_US
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen_US
thesis.degree.disciplineAerospace Engineeringen_US
dc.contributor.committeechairWoolsey, Craig A.en_US
dc.contributor.committeememberSultan, Cornelen_US
dc.contributor.committeememberQueen, Eric M.en_US
dc.contributor.committeememberKurdila, Andrew Jen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record