Practical Analysis Tools for Structures Subjected to Flow-Induced and Non-Stationary Random Loads
| dc.contributor.author | Scott, Karen Mary Louise | en |
| dc.contributor.committeechair | Kapania, Rakesh K. | en |
| dc.contributor.committeemember | Patil, Mayuresh J. | en |
| dc.contributor.committeemember | Philen, Michael K. | en |
| dc.contributor.committeemember | Schetz, Joseph A. | en |
| dc.contributor.department | Aerospace and Ocean Engineering | en |
| dc.date.accessioned | 2014-03-14T21:15:15Z | en |
| dc.date.adate | 2011-07-14 | en |
| dc.date.available | 2014-03-14T21:15:15Z | en |
| dc.date.issued | 2011-06-20 | en |
| dc.date.rdate | 2011-07-14 | en |
| dc.date.sdate | 2011-06-29 | en |
| dc.description.abstract | There is a need to investigate and improve upon existing methods to predict response of sensors due to flow-induced vibrations in a pipe flow. The aim was to develop a tool which would enable an engineer to quickly evaluate the suitability of a particular design for a certain pipe flow application, without sacrificing fidelity. The primary methods, found in guides published by the American Society of Mechanical Engineers (ASME), of simple response prediction of sensors were found to be lacking in several key areas, which prompted development of the tool described herein. A particular limitation of the existing guidelines deals with complex stochastic stationary and non-stationary modeling and required much further study, therefore providing direction for the second portion of this body of work. A tool for response prediction of fluid-induced vibrations of sensors was developed which allowed for analysis of low aspect ratio sensors. Results from the tool were compared to experimental lift and drag data, recorded for a range of flow velocities. The model was found to perform well over the majority of the velocity range showing superiority in prediction of response as compared to ASME guidelines. The tool was then applied to a design problem given by an industrial partner, showing several of their designs to be inadequate for the proposed flow regime. This immediate identification of unsuitable designs no doubt saved significant time in the product development process. Work to investigate stochastic modeling in structural dynamics was undertaken to understand the reasons for the limitations found in fluid-structure interaction models. A particular weakness, non-stationary forcing, was found to be the most lacking in terms of use in the design stage of structures. A method was developed using the Karhunen Loeve expansion as its base to close the gap between prohibitively simple (stationary only) models and those which require too much computation time. Models were developed from SDOF through continuous systems and shown to perform well at each stage. Further work is needed in this area to bring this work full circle such that the lessons learned can improve design level turbulent response calculations. | en |
| dc.description.degree | Ph. D. | en |
| dc.identifier.other | etd-06292011-104123 | en |
| dc.identifier.sourceurl | http://scholar.lib.vt.edu/theses/available/etd-06292011-104123/ | en |
| dc.identifier.uri | http://hdl.handle.net/10919/38686 | en |
| dc.publisher | Virginia Tech | en |
| dc.relation.haspart | Scott_KML_D_2011_Copyright.pdf | en |
| dc.relation.haspart | Scott_KML_D_2011.pdf | en |
| dc.rights | In Copyright | en |
| dc.rights.uri | http://rightsstatements.org/vocab/InC/1.0/ | en |
| dc.subject | Flow-induced vibration | en |
| dc.subject | random vibration | en |
| dc.subject | non-stationary forcing | en |
| dc.subject | Karhunen-Loeve expansion | en |
| dc.subject | polynomial chaos | en |
| dc.title | Practical Analysis Tools for Structures Subjected to Flow-Induced and Non-Stationary Random Loads | en |
| dc.type | Dissertation | en |
| thesis.degree.discipline | Aerospace and Ocean Engineering | en |
| thesis.degree.grantor | Virginia Polytechnic Institute and State University | en |
| thesis.degree.level | doctoral | en |
| thesis.degree.name | Ph. D. | en |