Optimization of Harmonically Deforming Thin Airfoils and Membrane Wings for Optimum Thrust and Efficiency

dc.contributor.authorWalker, William Paulen
dc.contributor.committeechairPatil, Mayuresh J.en
dc.contributor.committeememberCanfield, Robert A.en
dc.contributor.committeememberDevenport, William J.en
dc.contributor.committeememberMason, William H.en
dc.contributor.departmentAerospace and Ocean Engineeringen
dc.date.accessioned2014-03-14T20:12:08Zen
dc.date.adate2012-05-30en
dc.date.available2014-03-14T20:12:08Zen
dc.date.issued2012-05-09en
dc.date.rdate2012-05-30en
dc.date.sdate2012-05-16en
dc.description.abstractThis dissertation presents both analytical and numerical approaches to optimizing thrust and thrust efficiency of harmonically deforming thin airfoils and membrane wings. A frequency domain unsteady aerodynamic theory for deformable thin airfoils, with Chebychev polynomials as the basis functions is presented. Stroke-averaged thrust and thrust efficiency expressions are presented in a quadratic matrix form. The motion and deformation of the airfoil is optimized for maximum thrust and efficiency. Pareto fronts are generated showing optimum deformation conditions (magnitude and phase) for various reduced frequencies and constraints. It is shown that prescribing the airfoil to deform in a linear combination of basis functions with optimal magnitude and phase results in a larger thrust as compared to rigid plunging, especially at low reduced frequencies. It is further shown that the problem can be constrained significantly such that thrust is due entirely to pressure with no leading edge suction, and associated leading edge separation. The complete aeroelastic system for a membrane wing is also optimized. The aerodynamic theory for deformable thin airfoils is used as the forcing in a membrane vibration problem. Due to the nature of the two dimensional theory, the membrane vibration problem is reduced to two dimensions via the Galerkin method and nondimensionalized such that the only terms are nondimesional tension, mass ratio and reduced frequency. The maximum thrust for the membrane wing is calculated by optimizing the tension in the membrane so that the the aeroelastic deformation due to wing motion leads to optimal thrust and/or efficiency. A function which describes the optimal variation of spanwise tension along the chord is calculated. It is shown that one can always find a range of membrane tension for which the flexible membrane wings performs better than the rigid wing. These results can be used in preliminary flapping wing MAV design.en
dc.description.degreePh. D.en
dc.identifier.otheretd-05162012-134802en
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-05162012-134802/en
dc.identifier.urihttp://hdl.handle.net/10919/27748en
dc.publisherVirginia Techen
dc.relation.haspartWalker_WP_D_2012.pdfen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectUnsteady Aerodynamicsen
dc.subjectDeformable Airfoilsen
dc.subjectMembrane Aeroelasticityen
dc.subjectAeroelastic Tailoringen
dc.subjectOptimizationen
dc.titleOptimization of Harmonically Deforming Thin Airfoils and Membrane Wings for Optimum Thrust and Efficiencyen
dc.typeDissertationen
thesis.degree.disciplineAerospace and Ocean Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.leveldoctoralen
thesis.degree.namePh. D.en

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Walker_WP_D_2012.pdf
Size:
1.31 MB
Format:
Adobe Portable Document Format