Investigation of the Residual Mechanical and Porosity Properties of Cement Mortar under Axial Stress during Heating
| dc.contributor.author | Gao, Zhifei | en |
| dc.contributor.author | Wang, Linbing | en |
| dc.contributor.author | Yang, Hailu | en |
| dc.contributor.department | Civil & Environmental Engineering | en |
| dc.date.accessioned | 2021-04-26T12:23:42Z | en |
| dc.date.available | 2021-04-26T12:23:42Z | en |
| dc.date.issued | 2021-04-13 | en |
| dc.date.updated | 2021-04-23T13:35:34Z | en |
| dc.description.abstract | The preload load on concrete during heating is considered to cause a ‘densification’ of cement mortar which led to the increased compressive strength. In order to assess the influence of coupled load and heating effects on porosity characteristics of concrete, the porosity of mortar after mechanical and thermal loading was measured by X-ray computed tomography (X-ray CT). The preload at pre-stress ratios of 0, 0.2, 0.4, and 0.6 (ratio of stress applied to the specimen to its compressive strength at room temperature) were applied on mortar specimens during heating. The residual compressive strengths of the heated and stressed mortar specimens were tested after cooling to room temperature. Combined analyses of the residual compressive strength test results and porosity test results, it shows that the porosity of the specimens under the coupled stressing and heating conditions were slightly lower than that under the unstressed conditions; however, the conclusion that the increase of compressive strength of stressed mortar was caused by the ‘densification’ of cement paste was insufficient. The preload reduced the cracks in the mortar, especially the crack induced due to the thermal mismatch in aggregates and hardened cement paste (HCP), and this may account for the increased compressive strength of stressed mortar. | en |
| dc.description.version | Published version | en |
| dc.format.mimetype | application/pdf | en |
| dc.identifier.citation | Gao, Z.; Wang, L.; Yang, H. Investigation of the Residual Mechanical and Porosity Properties of Cement Mortar under Axial Stress during Heating. Materials 2021, 14, 1944. | en |
| dc.identifier.doi | https://doi.org/10.3390/ma14081944 | en |
| dc.identifier.uri | http://hdl.handle.net/10919/103114 | en |
| dc.language.iso | en | en |
| dc.publisher | MDPI | en |
| dc.rights | Creative Commons Attribution 4.0 International | en |
| dc.rights.uri | http://creativecommons.org/licenses/by/4.0/ | en |
| dc.subject | cement mortar | en |
| dc.subject | X-ray CT | en |
| dc.subject | porosity | en |
| dc.subject | residual compressive strength | en |
| dc.subject | preload | en |
| dc.title | Investigation of the Residual Mechanical and Porosity Properties of Cement Mortar under Axial Stress during Heating | en |
| dc.title.serial | Materials | en |
| dc.type | Article - Refereed | en |
| dc.type.dcmitype | Text | en |
| dc.type.dcmitype | StillImage | en |