The Design and Modeling of Ultra-Wideband Position-Location Networks

dc.contributor.authorVenkatesh, Swaroopen
dc.contributor.committeechairBuehrer, R. Michaelen
dc.contributor.committeememberDavis, William A.en
dc.contributor.committeememberFraticelli, Barbara M. P.en
dc.contributor.committeememberReed, Jeffrey H.en
dc.contributor.committeememberMidkiff, Scott F.en
dc.contributor.departmentElectrical and Computer Engineeringen
dc.date.accessioned2014-03-14T20:07:50Zen
dc.date.adate2007-03-09en
dc.date.available2014-03-14T20:07:50Zen
dc.date.issued2007-02-20en
dc.date.rdate2010-03-09en
dc.date.sdate2007-02-27en
dc.description.abstractImpulse-based Ultrawideband (UWB) is a form of signaling which uses streams of pulses of very short duration, typically on the order of a nanosecond. Impulse-based UWB systems possess the ability to fuse accurate position-location with low-data rate communication, and provide covertness for tactical applications and robustness in dense multipath propagation environments. These features can be leveraged in the design wireless ad hoc position-location networks (PoLoNets) for accurate location tracking and monitoring where GPS is not available, especially indoors. Location information is sequentially propagated through a network of reference nodes in order to create a framework for the tracking of mobile nodes, as well as a multi-hop message-passing infrastructure between mobile nodes and control nodes located outside the area of deployment. The applications of such networks include the location and command-and-control of fire-fighters in emergency scenarios, the location of military personnel deployed in urban or indoor environments, and the guidance of robots through large multi-room indoor environments. The main objective of this dissertation is to derive design principles, techniques and analytical models for UWB PoLoNets that are useful in the development of practical solutions. Some of the fundamental obstacles to obtaining accurate location information in indoor environments are non-line-of-sight (NLOS) signal propagation, limited connectivity between nodes, and the propagation of localization inaccuracies when using sequential estimation approaches in ad hoc scenarios. Several techniques and algorithms that mitigate these effects, thereby allowing the design of PoLoNets with requisite localization accuracy, are presented. Although these techniques are developed from the perspective of a UWB physical layer, the majority are applicable to generic PoLoNets.en
dc.description.degreePh. D.en
dc.identifier.otheretd-02272007-155134en
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-02272007-155134/en
dc.identifier.urihttp://hdl.handle.net/10919/26322en
dc.publisherVirginia Techen
dc.relation.haspartSwaroop_Venkatesh_ETD_v3.pdfen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectUltra-Widebanden
dc.subjectPosition-locationen
dc.subjectWireless Networksen
dc.subjectLocalizationen
dc.titleThe Design and Modeling of Ultra-Wideband Position-Location Networksen
dc.typeDissertationen
thesis.degree.disciplineElectrical and Computer Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.leveldoctoralen
thesis.degree.namePh. D.en
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Swaroop_Venkatesh_ETD_v3.pdf
Size:
8.21 MB
Format:
Adobe Portable Document Format