Gas transport properties in polycarbonate - Influence of the cooling rate, physical aging, and orientation

dc.contributor.authorLaot, Christelle Marieen
dc.contributor.committeechairMarand, Evaen
dc.contributor.committeememberSaraf, Ravi F.en
dc.contributor.committeememberWilkes, Garth L.en
dc.contributor.committeememberDavis, Richey M.en
dc.contributor.committeememberMarand, Hervé L.en
dc.contributor.departmentChemical Engineeringen
dc.description.abstractThe objective of this research work was to understand the molecular mechanism of gas transport through amorphous glassy polymers. Especially, emphasis was placed on determining whether or not gas transport in amorphous glassy polymers is directly correlated with the free volume content. Free volume arguments are indeed commonly used to explain the gas transport process. The gas transport properties of bisphenol-A polycarbonate films were examined as a function of the cooling rate, physical aging, and orientation. Such conditions affect the free volume content and its size and shape distribution. Results obtained from permeation experiments were accompanied with dynamic mechanical and density measurements. The experimental results suggest that the diffusion coefficient of small gas molecules in glassy polycarbonate is influenced by the local dynamics or mobility of the polymer chains rather than by the overall free volume content. Indeed, the diffusion coefficient of nitrogen for instance was reduced in fast-cooled samples, despite of the fact that those samples possessed a greater overall free volume content. Fast cooling rates may generate highly restricted conformations which hinder local motions, and therefore tend to increase the activation energy of diffusion. As expected, the greater the free volume content, the greater was the solubility coefficient. The increase in the polymer relaxation times with aging time is believed to restrict the local chain motions, leading to enhanced activation energies of diffusion, and therefore to reduced diffusion coefficients. The change in the solubility coefficients with physical aging revealed that the aging process might not affect all the cavity sizes in polycarbonate equally. According to free volume arguments, one would anticipate that the physical aging of fast-cooled samples (which possess more free volume) should be enhanced compared to that of slowly-cooled samples. Quite interestingly, the decrease in the diffusion coefficient with aging was found to occur much slower in fast-cooled samples, despite of the higher initial free volume content. In contrast, properties directly related to the free volume content, such as density or isothermal DMTA measurements actually showed a greater aging rate in the sample containing the greatest amount of free volume. Slow-cooled samples that are in a low energy conformational state may loose their internal degrees of freedom more rapidly, due to the closer interchain packing and the possibly restricted segmental motions. Studies dealing with orientation and gas transport were complicated by several factors. For instance the fact that the permeation experiments were performed perpendicularly to the orientation of the chains and not along the orientation axis limited the sensitivity of the gas transport properties to orientation. This work points out that dynamic rather than static models should be developed to predict the gas transport phenomenon.en
dc.description.degreePh. D.en
dc.publisherVirginia Techen
dc.rightsIn Copyrighten
dc.subjectgas transporten
dc.subjectcooling rateen
dc.subjectphysical agingen
dc.subjectfree volumeen
dc.titleGas transport properties in polycarbonate - Influence of the cooling rate, physical aging, and orientationen
dc.typeDissertationen Engineeringen Polytechnic Institute and State Universityen D.en


Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
3.41 MB
Adobe Portable Document Format