VTechWorks staff will be away for the winter holidays starting Tuesday, December 24, 2024, through Wednesday, January 1, 2025, and will not be replying to requests during this time. Thank you for your patience, and happy holidays!
 

Adaptive Process Control for Achieving Consistent Mean Particles' States in Atmospheric Plasma Spray Process

Simple item page
dc.contributor.authorGuduri, Balachandaren
dc.contributor.committeechairBatra, Romesh C.en
dc.contributor.committeememberThangjitham, Suroten
dc.contributor.committeememberStremler, Mark A.en
dc.contributor.committeememberRagab, Saad A.en
dc.contributor.committeememberPickrell, Gary R.en
dc.contributor.departmentEngineering Science and Mechanicsen
dc.date.accessioned2022-02-09T09:00:27Zen
dc.date.available2022-02-09T09:00:27Zen
dc.date.issued2022-02-08en
dc.description.abstractThe coatings produced by an atmospheric plasma spray process (APSP) must be of uniform quality. However, the complexity of the process and the random introduction of noise variables such as fluctuations in the powder injection rate and the arc voltage make it difficult to control the coating quality that has been shown to depend upon mean values of powder particles' temperature and speed, collectively called mean particles' states (MPSs), just before they impact the substrate. Here we use a science-based methodology to develop an adaptive controller for achieving consistent MPSs. We first identify inputs into the APSP that significantly affect the MPSs, and then formulate a relationship between these two quantities. When the MPSs deviate from their desired values, the adaptive controller based on the model reference adaptive controller (MRAC) framework is shown to successfully adjust the input parameters to correct them. The performance of the controller is tested via numerical experiments using the software, LAVA-P, that has been shown to well simulate the APSP. The developed adaptive process controller is further refined by using sigma (σ) adaptive laws and including a low-pass filter that remove high-frequency oscillations in the output. The utility of the MRAC controller to achieve desired locations of NiCrAlY and zirconia powder particles for generating a 5-layered coating is demonstrated. In this case a pure NiCrAlY layer bonds to the substrate and a pure zirconia makes the coating top. The composition of the intermediate 3 layers is combination of the two powders of different mass fractions. By increasing the number of intermediate layers, one can achieve a continuous through-the-thickness variation of the coating composition and fabricate a functionally graded coating.en
dc.description.abstractgeneralCanned food sold in a grocery store have cans' interior surface coating with a polymer to increase the shelf life of the food. Similarly, many parts in an automobile have coatings to protect them from corrosion and possibly wear and tear. A process used to produce these coatings is rather complex and involves several variables. An undesired change these variables affects the coating quality. Automatically controlling a coating process is like a cruise control in a car. It should detect which variables have changed and either take appropriate corrective actions or shut down the process if it cannot be corrected or alert an operator to stop the process. In this work we have developed a controller to adaptively adjust the input parameters for an atmospheric plasma spray process (APSP) often used to produce thermal barrier coatings in gas turbines and blades of aircraft jet engines. These coatings hinder the flow of heat from the hot exhaust gases to the blades thereby prolonging their life span.en
dc.description.degreeDoctor of Philosophyen
dc.format.mediumETDen
dc.identifier.othervt_gsexam:32939en
dc.identifier.urihttp://hdl.handle.net/10919/108235en
dc.language.isoenen
dc.publisherVirginia Techen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectPlasma spray processen
dc.subjectParameters screeningen
dc.subjectResponse functionsen
dc.subjectAdaptive controlleren
dc.subjectFunctionally graded coatingen
dc.titleAdaptive Process Control for Achieving Consistent Mean Particles' States in Atmospheric Plasma Spray Processen
dc.typeDissertationen
thesis.degree.disciplineEngineering Mechanicsen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.leveldoctoralen
thesis.degree.nameDoctor of Philosophyen

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Guduri_B_D_2022.pdf
Size:
12.82 MB
Format:
Adobe Portable Document Format
Download

Collections

Doctoral Dissertations