The role of the fiber/matrix interphase in the static and fatigue behavior of polymeric matrix composite laminates

dc.contributor.authorSwain, Robert Edwarden
dc.contributor.committeechairReifsnider, Kenneth L.en
dc.contributor.committeememberCramer, Mark S.en
dc.contributor.committeememberHendricks, Scott L.en
dc.contributor.committeememberLytton, Jack L.en
dc.contributor.committeememberStinchcomb, Wayne W.en
dc.contributor.departmentEngineering Mechanicsen
dc.description.abstractWithin the past several years, researchers have detected the presence of a third “phase” between the bulk fiber phase and bulk matrix phase in a polymeric matrix composite. This finite-thickness region — termed the interphase — possesses mechanical, physical, and chemical properties that are distinct from the fiber and matrix constituents. Thus, the interphase embodies the characteristics of the fiber/matrix bond, including the strength and stiffness of the bond. In essence, the interphase represents the composite system, since it defines the level of synergistic interaction that occurs between the load-carrying fibers and the binding matrix material. Recent interest in the interphase has spawned international conferences and a technical journal devoted to its study. Despite this spate of research, some very fundamental questions about the interphase have remained unanswered. One such question is: “What is best for the performance of a composite, a strong or weak or intermediate-strength interphase?” It is surprising that this question is even asked, since, until recently, it had been assumed that the stronger the fiber/matrix bond, the better the composite behavior. It is now known that this adage is far from true. Two formidable challenges await those who wish to correlate the strength of the interphase to the mechanical performance of polymeric matrix composite materials. First, one seeks to systematically alter the interphase in order to exploit this variable. In this study, fourteen material systems representing permutations of four carbon fibers, three matrix systems, percentages of fiber surface treatment, and three sizing conditions have been examined. Secondly, one needs to quantitatively characterize the properties of the resultant interphase in order to correlate the bond condition to the composite’s mechanical behavior. This investigation utilizes two techniques, the Continuous Ball Indentation Test and transverse flexure testing, as a means of interrogating the strength of the interphase. The influence of the interphase on the tensile and compressive strength and modulus of crossplied laminates possessing a center hole is investigated. Unnotched angle-ply ([±45]<sub>ns</sub>) laminates are also tested in order to assess the role of the interphase in the strength of a “matrix-dominated” laminate. Fully-reversed (R =-1), axial fatigue of notched cross-plied laminates from each of the fourteen material systems 1s performed. During fatigue testing several data are monitored, including cycles to failure, dynamic modulus, and notch temperature. The tension-tension (R= 0.1) fatigue response of the unnotched angle-ply laminates is also studied. Results from X-ray radiography of fatigue-damaged specimens help to explain the relationship between the interphase and the initiation and propagation of life-critical damage mechanisms. Having observed the formative role played by the interphase in the performance of these laminates, an attempt is made to introduce variables representing the interphase into micromechanical models of composite behavior.en
dc.description.degreePh. D.en
dc.format.extentxviii, 272 leavesen
dc.publisherVirginia Techen
dc.relation.isformatofOCLC# 26166979en
dc.rightsIn Copyrighten
dc.subject.lccLD5655.V856 1992.S924en
dc.subject.lcshLaminated materials -- Fatigueen
dc.subject.lcshLaminated materials -- Testingen
dc.subject.lcshPolymeric composites -- Fatigueen
dc.subject.lcshPolymeric composites -- Testingen
dc.titleThe role of the fiber/matrix interphase in the static and fatigue behavior of polymeric matrix composite laminatesen
dc.type.dcmitypeTexten Mechanicsen Polytechnic Institute and State Universityen D.en
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
41.59 MB
Adobe Portable Document Format