VTechWorks staff will be away for the winter holidays starting Tuesday, December 24, 2024, through Wednesday, January 1, 2025, and will not be replying to requests during this time. Thank you for your patience, and happy holidays!
 

Development of "Core-Suction" Technique for Fabrication of Highly Doped Fibers for Optical Amplification and Characterization of Optical Fibers for Raman Amplification

dc.contributor.authorGoel, Nitin Kumaren
dc.contributor.committeechairStolen, Roger Hallen
dc.contributor.committeecochairPickrell, Gary R.en
dc.contributor.committeememberHeflin, James R.en
dc.contributor.committeememberSafaai-Jazi, Ahmaden
dc.contributor.committeememberWang, Anboen
dc.contributor.committeememberJacobs, Iraen
dc.contributor.departmentElectrical and Computer Engineeringen
dc.date.accessioned2014-03-14T20:17:27Zen
dc.date.adate2005-10-31en
dc.date.available2014-03-14T20:17:27Zen
dc.date.issued2005-10-11en
dc.date.rdate2005-10-31en
dc.date.sdate2005-10-18en
dc.description.abstractThis thesis presents a novel technique named "Core Suction" for fabricating optical fiber preforms for manufacturing highly doped fibers (HDFs) for optical amplification (Raman effect based or Erbium fiber based). The technique involves drawing the molten non-conventional core glass material into the silica cladding tube to form the preform. The developed technique is simple, inexpensive and shows great potential for fabricating preforms of highly nonlinear non-conventional multi-component glasses as the core material. Preforms were made with various core glasses such as Schott SF6, Lead-Tellurium-Germanate, Lead-Tellurium-Germanate- Neodymium -Erbium and MM2 in silica cladding tubes and then pulled into fibers. The fabricated fibers were measured for refractive index profile, loss spectrum and spontaneous Raman spectra. Elemental analysis of the fiber samples was also performed using an electron microprobe. Erbium doped fiber amplifiers (EDFAs) were setup using 30 cm, 5cm and 1 cm lengths of fabricated erbium doped fibers and their gain spectra measured. The distributed gain spectrum for an EDFA was also measured using an optical frequency domain reflectometery (OFDR) technique. Commercial dispersion compensated fiber (DCF) with very high GeO2 doping was used to setup a Raman amplifier and the gain spectrum measured. One of the needs of Raman amplification in optical fibers is to predict an accurate Raman gain, based on the fiber's refractive index profile. A method of predicting Raman gain in GeO2 doped fibers is presented and the predicted Raman gain values are compared with the measured ones in the same fibers. Raman gain issues like the dependence of the Raman gain on the GeO2 concentration, polarization dependence were taken into account for the gain calculations. An experimental setup for Raman gain measurements was made and measurement issues addressed. Polarization dependence of the Raman gain in one kilometer of polarization maintaining fiber was also measured.en
dc.description.degreePh. D.en
dc.identifier.otheretd-10182005-202925en
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-10182005-202925/en
dc.identifier.urihttp://hdl.handle.net/10919/29302en
dc.publisherVirginia Techen
dc.relation.haspartgoel_nitin_dissertation2005.pdfen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectRaman Amplifieren
dc.subjectErbium Doped Fiber Amplifieren
dc.subject"Core-Suction" Techniqueen
dc.subjectHighly Nonlinear Fibersen
dc.titleDevelopment of "Core-Suction" Technique for Fabrication of Highly Doped Fibers for Optical Amplification and Characterization of Optical Fibers for Raman Amplificationen
dc.typeDissertationen
thesis.degree.disciplineElectrical and Computer Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.leveldoctoralen
thesis.degree.namePh. D.en

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
goel_nitin_dissertation2005.pdf
Size:
2.87 MB
Format:
Adobe Portable Document Format