Digital Test of Composite Material Using X-Ray Tomography and Finite Element Simulation

dc.contributor.authorZhang, Bingen
dc.contributor.committeechairWang, Linbingen
dc.contributor.committeememberDuncan, James Michaelen
dc.contributor.committeememberLesko, John J.en
dc.contributor.committeememberGutierrez, Marte S.en
dc.contributor.committeememberFlintsch, Gerardo W.en
dc.contributor.departmentCivil Engineeringen
dc.description.abstractCharacterization of composite materials, such as Asphalt Concrete (AC) and other engineering materials is required to provide data for design and construction. This is usually carried out through various performance tests, which are always time consuming for specimen preparation, equipment calibration and test setting up. For materials with time- and temperature-dependent properties, this procedure requires fabrication of a large number of specimens in order to get reasonably comprehensive results. Furthermore, for materials that consist of phases with significant differences in properties, macroscopic homogeneous assumption or microscopic statistic approximation will lead to complex correction schemes. This will add complexity in material characterization. On the other hand, the homogeneity based interpretation of test results makes it difficult to understand the interaction between different components. The objective of this research is to develop a numerical testing method for material characterization based on x-ray tomography and finite element method. The introduction of tomography technology, such as x-ray tomography into engineering field makes it possible to obtain material microstructure without disturbing the phase configuration. Along with the development of image analysis technology, image data can be manipulated to obtain digitalized sample reconstruction and to build finite element geometric model. Based on well developed material models that sufficiently capture the essential behavior of individual material component, we developed a framework of numerical tests for characterization of composite material. The geometric model imports the microstructural data of the sample, the configuration of aggregates, voids and flakes, through x-ray tomography and image processing. The voids distribution as well as density variation was quantified to verify the model microscopic characteristics. FORTRAN programs were developed to automatically achieve data transfer and model generation, e.g. boundary identification and ABAQUS simulation model generation. Material model was studied and selected for different material components. Viscoplastic material models were evaluated and calibrated in ABAQUS. Monotonic loading and repeated loading were considered in the study to validate the model for most characterization needs. The digital model was validated through small sample tests and was implemented and used in various material characterizations. For the wood panel characterization, the anisotropic elastic properties were studied while the viscous and plastic responses were studied for asphalt concrete. Factors affecting the accuracy and the limitations of the application were determined. It is worth noting that further advance and data collection will make the calibration of material model more accurate. Nevertheless, the work can be extended to other regimes, such as high speed impact especially where the actual testing is complicated to setup.en
dc.description.degreePh. D.en
dc.publisherVirginia Techen
dc.rightsIn Copyrighten
dc.subjectcomposite materialen
dc.subjectx-ray tomographyen
dc.subjectFinite element methoden
dc.subjectdigital testen
dc.titleDigital Test of Composite Material Using X-Ray Tomography and Finite Element Simulationen
dc.typeDissertationen Engineeringen Polytechnic Institute and State Universityen D.en


Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
4.36 MB
Adobe Portable Document Format