Mechanics of Hybrid Metal Matrix Composites
| dc.contributor.author | Dibelka, Jessica Anne | en |
| dc.contributor.committeechair | Case, Scott W. | en |
| dc.contributor.committeemember | Lattimer, Brian Y. | en |
| dc.contributor.committeemember | Staples, Anne E. | en |
| dc.contributor.committeemember | Batra, Romesh C. | en |
| dc.contributor.committeemember | Carter, Robert Hansbrough | en |
| dc.contributor.department | Engineering Science and Mechanics | en |
| dc.date.accessioned | 2014-10-20T06:00:08Z | en |
| dc.date.available | 2014-10-20T06:00:08Z | en |
| dc.date.issued | 2013-04-27 | en |
| dc.description.abstract | The appeal of hybrid composites is the ability to create materials with properties which normally do not coexist such as high specific strength, stiffness, and toughness. One possible application for hybrid composites is as backplate materials in layered armor. Fiber reinforced composites have been used as backplate materials due to their potential to absorb more energy than monolithic materials at similar to lower weights through microfragmentation of the fiber, matrix, and fiber-matrix interface. Composite backplates are traditionally constructed from graphite or glass fiber reinforced epoxy composites. However, continuous alumina fiber-reinforced aluminum metal matrix composites (MMCs) have superior specific transverse and specific shear properties than epoxy composites. Unlike the epoxy composites, MMCs have the ability to absorb additional energy through plastic deformation of the metal matrix. Although, these enhanced properties may make continuous alumina reinforced MMCs advantageous for use as backplate materials, they still exhibit a low failure strain and therefore have low toughness. One possible solution to improve their energy absorption capabilities while maintaining the high specific stiffness and strength properties of continuous reinforced MMCs is through hybridization. To increase the strain to failure and energy absorption capability of a continuous alumina reinforced Nextel" MMC, it is laminated with a high failure strain Saffil® discontinuous alumina fiber layer. Uniaxial tensile testing of hybrid composites with varying Nextel" to Saffil® reinforcement ratios resulted in composites with non-catastrophic tensile failures and an increased strain to failure than the single reinforcement Nextel" MMC. The tensile behavior of six hybrid continuous and discontinuous alumina fiber reinforced MMCs are reported, as well as a description of the mechanics behind their unique behavior. Additionally, a study on the effects of fiber damage induced during processing is performed to obtain accurate as-processed fiber properties and improve single reinforced laminate strength predictions. A stochastic damage evolution model is used to predict failure of the continuous Nextel" fabric composite which is then applied to a finite element model to predict the progressive failure of two of the hybrid laminates. | en |
| dc.description.degree | Ph. D. | en |
| dc.format.medium | ETD | en |
| dc.identifier.other | vt_gsexam:707 | en |
| dc.identifier.uri | http://hdl.handle.net/10919/50579 | en |
| dc.publisher | Virginia Tech | en |
| dc.rights | In Copyright | en |
| dc.rights.uri | http://rightsstatements.org/vocab/InC/1.0/ | en |
| dc.subject | continuous fiber | en |
| dc.subject | discontinuous fiber | en |
| dc.subject | alumina | en |
| dc.subject | aluminum matrix | en |
| dc.subject | progressive failure | en |
| dc.title | Mechanics of Hybrid Metal Matrix Composites | en |
| dc.type | Dissertation | en |
| thesis.degree.discipline | Engineering Mechanics | en |
| thesis.degree.grantor | Virginia Polytechnic Institute and State University | en |
| thesis.degree.level | doctoral | en |
| thesis.degree.name | Ph. D. | en |