Numerical investigation of pulsatile flow in endovascular stents

dc.contributorVirginia Techen
dc.contributor.authorRouhi, A.en
dc.contributor.authorPiomelli, U.en
dc.contributor.authorVlachos, Pavlos P.en
dc.contributor.departmentMechanical Engineeringen
dc.date.accessed2018-11-20en
dc.date.accessioned2013-12-04T15:20:24Zen
dc.date.available2013-12-04T15:20:24Zen
dc.date.issued2013-09-01en
dc.description.abstractThe flow in a plane channel with two idealized stents (one Lambda-shaped, the other X-shaped) is studied numerically. A periodic pressure gradient corresponding to one measured in the left anterior descending coronary artery was used to drive the flow. Two Reynolds numbers were examined, one (Re = 80) corresponding to resting conditions, the other (Re = 200) to exercise. The stents were implemented by an immersed boundary method. The formation and migration of vortices that had been observed experimentally was also seen here. In the previous studies, the compliance mismatch between stent and vessel was conjectured to be the reason for this phenomenon. However, in the present study we demonstrate that the vortices form despite the fact that the walls were rigid. Flow visualization and quantitative analysis lead us to conclude that this process is due to the stent wires that generate small localized recirculation regions that, when they interact with the near-wall flow reversal, result in the formation of these vortical structures. The recirculation regions grow and merge when the imposed waveform produces near-wall flow reversal, forming coherent quasi-spanwise vortices, that migrate away from the wall. The flow behavior due to the stents was compared with an unstented channel. The geometric characteristics of the Lambda-stent caused less deviation of the flow from an unstented channel than the X-stent. Investigating the role of advection and diffusion indicated that at Re = 80 advection has negligible contribution in the transport mechanism. Advection plays a role in the generation of streamwise vortices created for both stents at both Reynolds numbers. The effect of these vortices on the near-wall flow behavior is more significant for the Lambda-stent compared to the X-stent and at Re = 200 with respect to Re = 80. Finally, it was observed that increasing the Reynolds number leads to early vortex formation and the creation of the vortex in a stented channel is coincident with the near wall flow reversal in an unstented one.en
dc.description.sponsorshipNational Science and Engineering Research Council (NSERC)en
dc.description.sponsorshipCanada Research Chairs programen
dc.format.mimetypeapplication/pdfen
dc.identifier.citationRouhi, A. and Piomelli, U. and Vlachos, P., “Numerical investigation of pulsatile flow in endovascular stents’” Phys. Fluids (1994-present), 25, 091905 (2013), DOI:http://dx.doi.org/10.1063/1.4821618en
dc.identifier.doihttps://doi.org/10.1063/1.4821618en
dc.identifier.issn1070-6631en
dc.identifier.urihttp://hdl.handle.net/10919/24409en
dc.identifier.urlhttp://scitation.aip.org/content/aip/journal/pof2/25/9/10.1063/1.4821618en
dc.language.isoen_USen
dc.publisherAmerican Institute of Physicsen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectWall shear-stressen
dc.subjectNavier-stokes equationsen
dc.subjectPlatelets depositionen
dc.subjectBlood-flowen
dc.subjectIn-vitroen
dc.subjectDynamicsen
dc.subjectImplantationen
dc.subjectAtherosclerosisen
dc.subjectModelsen
dc.subjectArteryen
dc.titleNumerical investigation of pulsatile flow in endovascular stentsen
dc.title.serialPhysics of Fluidsen
dc.typeArticle - Refereeden
dc.type.dcmitypeTexten

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
1.4821618.pdf
Size:
18.56 MB
Format:
Adobe Portable Document Format
Description:
Main article