Parametric Investigation of the Combustor-Turbine Interface Leakage Geometry

Simple item page
dc.contributor.authorKnost, Daniel G.en
dc.contributor.committeechairThole, Karen A.en
dc.contributor.committeecochairBall, Kenneth S.en
dc.contributor.committeememberNg, Faien
dc.contributor.committeememberDuggleby, Andrew T.en
dc.contributor.committeememberStremler, Mark A.en
dc.contributor.departmentMechanical Engineeringen
dc.date.accessioned2014-03-14T20:16:56Zen
dc.date.adate2008-10-21en
dc.date.available2014-03-14T20:16:56Zen
dc.date.issued2008-09-19en
dc.date.rdate2008-10-21en
dc.date.sdate2008-09-30en
dc.description.abstractEngine development has been in the direction of increased turbine inlet temperatures to improve efficiency and power output. Secondary flows develop as a result of a near-wall pressure gradient in the stagnating flow approaching the inlet nozzle guide vane as well as a strong cross-passage gradient within the passage. These flow structures enhance heat transfer and convect hot core flow gases onto component surfaces. In modern engines it has become critical to cool component surfaces to extend part life. Bypass leakage flow emerging from the slot between the combustor and turbine endwalls can be utilized for cooling purposes if properly designed. This study examines a three-dimensional slot geometry, scalloped to manipulated leakage flow distribution. Statistical techniques are used to decouple the effects of four geometric parameters and quantify the relative influence of each on endwall cooling levels and near-wall total pressure losses. The slot geometry is also optimized for robustness across a range of inlet conditions. Average upstream distance to the slot is shown to dominate overall cooling levels with nominal slot width gaining influence at higher leakage flow rates. Scalloping amplitude is most influential to near-wall total pressure loss as formation of the horseshoe vortex and cross flow within the passage are affected. Scalloping phase alters local cooling levels as leakage injection is shifted laterally across the endwall.en
dc.description.degreePh. D.en
dc.identifier.otheretd-09302008-202855en
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-09302008-202855/en
dc.identifier.urihttp://hdl.handle.net/10919/29145en
dc.publisherVirginia Techen
dc.relation.haspartdknost_dissertation_compiled.pdfen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectsecondary flowsen
dc.subjectendwall coolingen
dc.subjectgas turbineen
dc.subjectOptimizationen
dc.titleParametric Investigation of the Combustor-Turbine Interface Leakage Geometryen
dc.typeDissertationen
thesis.degree.disciplineMechanical Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.leveldoctoralen
thesis.degree.namePh. D.en

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
dknost_dissertation_compiled.pdf
Size:
6.8 MB
Format:
Adobe Portable Document Format
Download

Collections

Doctoral Dissertations