Development and Evaluation of Methods to Assess Physical Exposures in the Workplace

dc.contributor.authorKim, Sun Wooken
dc.contributor.committeechairNussbaum, Maury A.en
dc.contributor.committeememberAgnew, Michael J.en
dc.contributor.committeememberMadigan, Michael L.en
dc.contributor.committeememberShewchuk, John P.en
dc.contributor.departmentIndustrial and Systems Engineeringen
dc.date.accessioned2013-02-19T22:35:10Zen
dc.date.available2013-02-19T22:35:10Zen
dc.date.issued2012-12-06en
dc.description.abstractWork-related musculoskeletal disorders (WSMDs) are an important health concern in the workplace.  Accurately quantifying the level of physical exposures (i.e., kinematics and kinetics) is essential for risk assessments, developing and/or testing interventions, and improving estimates of exposure-response relationships.  Such exposures ideally should be quantified in situ, while workers interact with the actual work environment to complete their tasks.  However, in practice, relatively crude and/or time-consuming methods are often used, including self-reports, observational methods, and simple instrumentation, since directly assessing physical exposures is challenging in the workplace, and typically resource prohibitive. Inertial motion capture (IMC) and in-shoe pressure measurement (IPM) systems are emerging wearable technologies, and they can, respectively, facilitate monitoring of body kinematics and external forces on the body in the workplace.  Thus, this research examined the potential of such technologies in exposure assessments, and evaluated them in comparison to mature laboratory systems (i.e., optical motion capture system and force platform) or direct observation.  Performance of an IMC system was evaluated during several manual material handling (MMH) tasks, in terms of estimated body kinematics and kinetics at selected body parts.  A practical issue, regarding calibrating the IPM system in the field, was addressed by defining an ad hoc global coordinate system using a force platform.  Several regression models were developed for estimating center-of-pressure location and ground reaction forces.  Given that outputs from the IMC and the IPM systems are numerically fine-grained, but generally lack contextual information about a given job, task classification approaches were explored to automatically identify task types and their time proportions in a job. Overall, the outcomes from these studies demonstrated the potential of the IMC and the IPM systems for measuring physical exposures in the workplace.  However, estimation of physical exposures using these systems requires further improvements in some cases.  This research provided groundwork for future rapid and direct assessments of physical exposures in the workplace, and which needs to be expanded and validated in future efforts.en
dc.description.degreePh. D.en
dc.format.mediumETDen
dc.identifier.othervt_gsexam:100en
dc.identifier.urihttp://hdl.handle.net/10919/19196en
dc.publisherVirginia Techen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectPhysical exposuresen
dc.subjectwearable technologiesen
dc.subjectclassificationen
dc.subjectmanual material handlingen
dc.titleDevelopment and Evaluation of Methods to Assess Physical Exposures in the Workplaceen
dc.typeDissertationen
thesis.degree.disciplineIndustrial and Systems Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.leveldoctoralen
thesis.degree.namePh. D.en

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Kim_S_D_2012.pdf
Size:
2.14 MB
Format:
Adobe Portable Document Format