Electrical Load Disaggregation and Demand Response in Commercial Buildings
| dc.contributor.author | Rahman, Imran | en |
| dc.contributor.committeechair | Rahman, Saifur | en |
| dc.contributor.committeechair | Pipattanasomporn, Manisa | en |
| dc.contributor.committeemember | Zuo, Lei | en |
| dc.contributor.committeemember | Dhillon, Harpreet Singh | en |
| dc.contributor.committeemember | De La Ree, Jaime | en |
| dc.contributor.department | Electrical Engineering | en |
| dc.date.accessioned | 2020-01-29T09:01:22Z | en |
| dc.date.available | 2020-01-29T09:01:22Z | en |
| dc.date.issued | 2020-01-28 | en |
| dc.description.abstract | Electrical power systems consist of a large number of power generators connected to consumers through a complex system of transmission and distribution lines. Within the electric grid, a continuous balance between generation and consumption of electricity must be maintained., ensuring stable operation of the grid. In recent decades due to increasing electricity demand, there is an increased likelihood of electrical power systems experiencing stress conditions. These conditions lead to a limited supply and cascading failures throughout the grid that could lead to wide area outages. Demand Response (DR) is a method involving the curtailment of loads during critical peak load hours, that restores that balance between demand and supply of electricity. In order to implement DR and ensure efficient energy operation of buildings, detailed energy monitoring is essential. This information can then be used for energy management, by monitoring the power consumption of devices and giving users detailed feedback at an individual device level. Based on the data from the Energy Information Administration (EIA), approximately half of all commercial buildings in the U.S. are 5,000 square feet or smaller in size, whereas the majority of the rest is made up of medium-sized commercial buildings ranging in size between 5,001 and 50,000 square feet. Given that these medium-size buildings account for a large portion of the total energy demand, these buildings are an ideal target for participating in DR. In this dissertation, two broad solutions for commercial building DR have been presented. The first is a load disaggregation technique to disaggregate the power of individual HVACs using machine learning classification techniques, where a single power meter is used to collect aggregated HVAC power data of a building. This method is then tested over a number of case studies, from which it is found that the aggregated power data can be disaggregated to accurately predict the power consumption and state of activity of individual HVAC loads. The second work focuses on a DR algorithm involving the determination of an optimal bid price for double auctioning between the user and the electric utility, in addition to a load scheduling algorithm that controls single floor HVAC and lighting loads in a commercial building, considering user preferences and load priorities. A number of case studies are carried out, from which it is observed that the algorithm can effectively control loads within a given demand limit, while efficiently maintaining user preferences for a number of different load configurations and scenarios. Therefore, the major contributions of this work include- A novel HVAC power disaggregation technique using machine learning methods, and also a DR algorithm for HVAC and lighting load control, incorporating user preferences and load priorities based on a double-auction approach. | en |
| dc.description.abstractgeneral | Electrical power systems consist of a large number of power generators connected to consumers through a complex system of transmission and distribution lines. Within the electric grid, a continuous balance between generation and consumption of electricity must be maintained., ensuring stable operation of the grid. When electricity demand is high, Demand Response (DR) is a method that can be used to reduce user loads, restoring the balance between demand and supply of electricity. Based on data from the Energy Information Administration (EIA), half of all commercial buildings in the US measure 5,000 square feet or smaller in size, whereas the majority of the other half is made up of medium-sized commercial buildings measuring in at between 5,001 to 50,000 square feet. This makes these commercial buildings an ideal target for participating in DR. In this dissertation, two broad solutions for commercial building DR have been presented. The first is a load disaggregation technique, where power consumption and activity of individual HVACs can be obtained, using a single power meter. The second work focuses on a DR algorithm, that controls single floor HVAC and lighting loads in a commercial building, based on a user generated bid price for electricity, user preferences and load priorities, when electricity demand is at its peak. | en |
| dc.description.degree | Doctor of Philosophy | en |
| dc.format.medium | ETD | en |
| dc.identifier.other | vt_gsexam:23831 | en |
| dc.identifier.uri | http://hdl.handle.net/10919/96602 | en |
| dc.publisher | Virginia Tech | en |
| dc.rights | In Copyright | en |
| dc.rights.uri | http://rightsstatements.org/vocab/InC/1.0/ | en |
| dc.subject | Load Disaggregation | en |
| dc.subject | Demand Response | en |
| dc.subject | Double-Auction | en |
| dc.subject | Bid Price | en |
| dc.subject | Load Scheduler | en |
| dc.subject | Load Priorities | en |
| dc.subject | User Preferences | en |
| dc.title | Electrical Load Disaggregation and Demand Response in Commercial Buildings | en |
| dc.type | Dissertation | en |
| thesis.degree.discipline | Electrical Engineering | en |
| thesis.degree.grantor | Virginia Polytechnic Institute and State University | en |
| thesis.degree.level | doctoral | en |
| thesis.degree.name | Doctor of Philosophy | en |