Evaluating Thermal and Mechanical Properties of Electrically Conductive Adhesives for Electronic Applications
dc.contributor.author | Xu, Shuangyan | en |
dc.contributor.committeechair | Dillard, David A. | en |
dc.contributor.committeemember | Case, Scott W. | en |
dc.contributor.committeemember | Ward, Thomas C. | en |
dc.contributor.committeemember | Lu, Guo-Quan | en |
dc.contributor.committeemember | Dillard, John G. | en |
dc.contributor.committeemember | Thangjitham, Surot | en |
dc.contributor.department | Engineering Science and Mechanics | en |
dc.date.accessioned | 2014-03-14T20:10:24Z | en |
dc.date.adate | 2002-04-26 | en |
dc.date.available | 2014-03-14T20:10:24Z | en |
dc.date.issued | 2002-04-12 | en |
dc.date.rdate | 2003-04-26 | en |
dc.date.sdate | 2002-04-22 | en |
dc.description.abstract | The objective of this study was to evaluate and gain a better understanding of the short-term impact performance and the long-term durability of electrically conductive adhesives for electronic interconnection applications. Three model conductive adhesives, designated as ECA1, ECA2 and ECA3, supplied by Emerson & Cuming, were investigated, in conjunction with printed circuit board (PCB) substrates with metallizations of Au/Ni/Cu and Cu, manufactured by Triad Circuit Inc. Effects of environmental aging on the durability of conductive adhesives and their joints were evaluated. All the samples for both mechanical tests and thermal tests were aged at 85%, 100%RH for periods of up to 50 days. Studies of bulk conductive adhesives suggested that both plasticization, which is reversible and further crosslinking and thermal degradation, which are irreversible, might have occurred upon exposure of ECAs to the hot/wet environment. The durability of electrically conductive adhesive joints was then investigated utilizing the double cantilever beam (DCB) test. It was observed that the conductive adhesive joint was significantly weakened following hydrothermal aging, and there was a transition from cohesive failure to interfacial failure as aging continued. A comparative study of the durability of different conductive adhesive and substrate metallization combinations suggested that the resistance of the adhesive joints to moisture attack is related to the adhesive properties, as well as the substrate metallizations. It was noted that the gold/adhesive interface had better resistance to moisture attack than the copper/adhesive interface. A reasonable explanation of this phenomenon was given based upon the concept of surface free energy and interfacial free energy. XPS analysis was performed on the fractured surfaces of DCB samples. For adhesive joints with copper metallization, copper oxide was detected on the failed surfaces upon exposure of the conductive adhesive joints following aging. XPS analysis on the fractured surfaces of adhesive joints with Au metallization suggested that diffusion of Cu to the Au surface might have happened on the Au/Ni/Cu plated PCB substrates during aging. The impact performance of conductive adhesives was quantitatively determined using a falling wedge test. This unique impact resistance testing method could serve as a useful tool to screen conductive adhesives at the materials level for bonding purpose. Moreover, this test could also provide some useful information for conductive adhesive development. This study revealed that the viscoelastic energy, which is a result of the internal friction created by chain motions within the adhesive material, played an important role in the impact fracture behavior of the conductive adhesives. This study also demonstrated that the loss factor, evaluated at the impact environment conditions, is a good indicator of a conductive adhesive's ability to withstand impact loading. | en |
dc.description.degree | Ph. D. | en |
dc.identifier.other | etd-04222002-174259 | en |
dc.identifier.sourceurl | http://scholar.lib.vt.edu/theses/available/etd-04222002-174259/ | en |
dc.identifier.uri | http://hdl.handle.net/10919/27112 | en |
dc.publisher | Virginia Tech | en |
dc.relation.haspart | Chapter4.PDF | en |
dc.relation.haspart | Chapter3.PDF | en |
dc.relation.haspart | Appendix.PDF | en |
dc.relation.haspart | Table.PDF | en |
dc.relation.haspart | Vita.PDF | en |
dc.relation.haspart | Chapter1.PDF | en |
dc.relation.haspart | Chapter4-Figs.PDF | en |
dc.relation.haspart | Chapter5-Figs.PDF | en |
dc.relation.haspart | Chapter2.PDF | en |
dc.relation.haspart | cover.PDF | en |
dc.relation.haspart | Chapter3-Figs.PDF | en |
dc.relation.haspart | Chapter5.PDF | en |
dc.relation.haspart | Chapter6.PDF | en |
dc.rights | In Copyright | en |
dc.rights.uri | http://rightsstatements.org/vocab/InC/1.0/ | en |
dc.subject | Impact Resistance | en |
dc.subject | Durability | en |
dc.subject | Electrically Conductive Adhesives | en |
dc.subject | Environmental Aging | en |
dc.subject | Loss Factor | en |
dc.subject | Thermal Properties | en |
dc.subject | Double Cantilever Beam | en |
dc.subject | Falling Wedge Test | en |
dc.subject | Fracture Toughness | en |
dc.subject | Mechanical Properties | en |
dc.title | Evaluating Thermal and Mechanical Properties of Electrically Conductive Adhesives for Electronic Applications | en |
dc.type | Dissertation | en |
thesis.degree.discipline | Engineering Science and Mechanics | en |
thesis.degree.grantor | Virginia Polytechnic Institute and State University | en |
thesis.degree.level | doctoral | en |
thesis.degree.name | Ph. D. | en |
Files
Original bundle
1 - 5 of 13