Developments in moire interferometry: carrier pattern technique and vibration insensitive interferometers

Due to the rapid expansion of applications of composite materials, investigations of their properties have greatly increased. Since theoretical and numerical methods have many limitations for anisotropic materials, experimental methods are sometimes the only way to answer the questions. It has been proved that moire interferometry is a powerful technique in the study of composite materials.

The high sensitivity and resolution of a measurement technique is the key to determining the properties of a material which has a fine and complicated structure such as fiber reinforced composite laminates. In this paper, a carrier fringe method is introduced to increase the resolution of the fringe gradient in the moire technique. The ability of measurement is extended to the micromechanics region. High strain concentrations and the dramatic displacement variations can be determined by measuring the slopes of carrier fringes. Strain distributions across the plies (with the thickness of 125 μm) in graphite/epoxy composites and strain concentrations in the resin-rich zones (with the thickness of 10 μm) between neighboring plies are revealed by the carrier fringe technique. Three experiments are presented to show the effectiveness of the application of carrier fringes to resolve fringe gradients and obtain strains. The current moire technique is limited to the optical laboratory because it is extremely sensitive to the disturbance of the environment. A vibration with magnitude of 0.2 μm can completely wash out the contrast of a moire fringe pattern. The study has been done in moving moire interferometry off the optical table. Vibration insensitive moire systems are investigated to extend the moire technique to the tests of large structures and using testing machines for loading. Vibration problems are discussed and the new ideas for eliminating vibration effects are presented. Six representative schemes are analyzed and three of these systems are built to perform experiments in rough environments such as on a hydraulic testing machine. The results show the great success of these new systems.