Remote sensing offers many advantages to previous forest measurements, such as limiting costs and time in the field. Light detection and ranging (lidar) has been shown to enable accurate estimates of forest height. Lidar does produce precise measurements for ground elevation and forest height, where and when it is available. However, it is expensive to collect and does not have wall-to-wall coverage in the United States. In this study, we estimated height using the National Agricultural Imagery Program (NAIP) photogrammetric point clouds to create a predicted height map for managed loblolly pine stands in the southeastern United States. Recent studies have investigated the ability of digital aerial photogrammetry (DAP), and more specifically NAIP, as an alternative to lidar as a means of estimating forest height due to its lower costs, frequency of acquisition, and wall-to-wall coverage across the United States. Field-collected canopy height for 534 plots in Virginia and North Carolina were regressed against the 90th percentile derived from NAIP point clouds. The model for predicted pine height using the 90th percentile of height (P90) is predicted pine height = 1.09(P90) – 0.43. The adjusted R^2 is 0.93, and the RMSE is 1.44 m. This model is being used to produce a 5 m x 5 m canopy height model for all pine stands across Virginia, North Carolina, and Tennessee. NAIP-derived point clouds are thus a viable means of predicting canopy height in southern pines.