Subsynchronous oscillations (SSO) were an issue that occurred in the past with conventional generators and were studied extensively throughout the years. However, with the rise of inverter-based resources, a new form of SSO emerged under the name subsynchronous control interaction (SSCI). More specifically, a resonance case occurs between Type-3 wind turbines and series compensation that can damage equipment within the wind farm and disrupt power generation. This work explores the types of SSCI and the various analysis methods as well as mitigation of SSCI. The work expands on the concept of frequency scan to be able to use it in an on-line setting with its output data used to mitigate SSCI through the modification of wind turbine parameters. Multiple frequency scans are conducted using PSCAD/EMTDC software to build a lookup table and harmonic injection is used in a parallel configuration to obtain the impedance of the system. Once the impedance of the system is obtained then the value of the parameters is adjusted using the look-up table. Harmonic injection is optimized through phase shifts to ensure minimal disruption of the steady-state operating point and is conducted using Python programming language with PSCAD Automation Library. Simulation results demonstrate the effectiveness of this approach by ensuring oscillations do not grow exponentially in comparison to the regular operation of the wind farm.