Engineering Yeast-Based Biocatalyst Systems for the Bioconversion of Waste Streams and Methods for Characterizing These Systems

TR Number

Date

2026-06-30

Journal Title

Journal ISSN

Volume Title

Publisher

Virginia Tech

Abstract

Polyethylene terephthalate (PET) is one of the most widely produced and easiest to recycle single-use plastics, yet in some parts of the world, fewer than 35% of post-consumer PET is recycled globally each year, which is in part due to the high cost of catalyzing depolymerization in traditional recycling methods. Enzymatic depolymerization of PET by polyesterases like PETase and MHETase offers a route to reducing the cost of PET recycling by allowing for depolymerization under mild aqueous conditions. Although isolated enzymes can be used as biocatalysts alone, surface display of polyesterases on living yeast cells converts the organism into a more stable, and semi-reusable catalyst that eliminates the need for enzyme purification. Co-display of the hydrophobin (HFB1) with PETase further improves degradation rates by increasing yeast cell-surface hydrophobicity and promoting more contact between the displayed enzymes and the PET substrate. However, most previously reported yeast surface-display systems for PET degradation rely on chemically inducible promoters, which do not scale well from the laboratory to production due to the high cost of induction media. This thesis addresses two interconnected objectives toward creating a platform for a scalable whole-cell PET biocatalyst. Aim 1 develops and validates a UV-Vis spectrophotometry method based on a simple dual-wavelength correction method utilizing the 244 and 290 nm wavelengths for detecting PET degradation products in reaction media in the presence of intact whole cells. The correction reduces cell-density-dependent signal variance and restores linearity across 10–50 µM terephthalic acid (TPA) concentration curve, achieving R² ≥ 0.95 at all tested cell densities and a limit of detection of approximately 7–13 µM TPA depending on cell concentration. Aim 2 describes multiplexed modular cloning design, assembly, and initial characterization of a constitutive tri-display system in Saccharomyces cerevisiae strain YPH499, co-displaying PETase, MHETase, and HFB1 from low-strength constitutive promoters. Correct integration was confirmed by colony PCR in all engineered yeast strains. Immunofluorescence labeling with anti-HA antibodies detected surface-accessible signal from the Aga2p anchored PETase fusion, though signal from the Sed1p and Cwp2p anchored MHETase and HFB1 fusions was near wild-type background, suggesting limitations in antibody accessibility or surface translocation efficiency for those anchors and expression levels. Neither UV-vis spectrophotometry nor HPLC detected TPA or MHET in any PET degradation reaction, indicating that the low-expression cassettes do not produce sufficient surface-localized enzyme activity to achieve measurable PET hydrolysis under the conditions tested. These results reconfirm the need to be able to rapidly screen the entire multiplexed library of whole cell biocatalyst clones to optimize protein expression levels for maximum PET degradation. The validated screening method and the modular cloning architecture established here provide a foundation for optimization of constitutive display strain libraries, to more rapidly advance toward a cost-effective and scalable whole-cell PET biocatalyst.

Description

Keywords

Whole-Cell Biocatalyst, Polyethylene terephthalate, UV-vis Spectrophotometry, Saccharomyces cerevisiae, Surface Display Whole-Cell Biocatalysts

Citation

Collections