Virginia Tech
    • Log in
    View Item 
    •   VTechWorks Home
    • ETDs: Virginia Tech Electronic Theses and Dissertations
    • Masters Theses
    • View Item
    •   VTechWorks Home
    • ETDs: Virginia Tech Electronic Theses and Dissertations
    • Masters Theses
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Free Surface Penetration of Inverted Right Circular Cones at Low Froude Number

    Thumbnail
    View/Open
    Koski_SR_T_2017.pdf (669.2Kb)
    Downloads: 433
    Date
    2017-04-05
    Author
    Koski, Samuel Robert
    Metadata
    Show full item record
    Abstract
    In this thesis the impact of inverted cones on a liquid surface is studied. It is known that with the right combination of velocity, geometry, and surface treatment, a cavity of air can be formed behind an impacting body and extended for a considerable distance. Other investigators have shown that the time and depth of the cone when this cavity collapses and seals follows a different power law for flat objects such as disks, then it does for slender objects such as cylinders. Intuitively it can be expected that a more slender body will have less drag and that the streamlined shape will not push the fluid out of it's way at impact to the same extent as a more blunt body, therefore forming a smaller cavity behind it. With a smaller initial cavity, the time and depth of it's eventual collapse can be expected to be less than that of a much more blunt object, such as a flat disk. To study this, a numerical model has been developed to simulate cones with the same base radius but different angles impacting on a liquid surface over a range of velocities, showing how the seal depth, time at cavity seal, and drag forces change. In order to ensure the numerical model is accurate, it is compared with experimental data including high speed video and measurements made of the force with time. It is expected that the results will fall inside the power law exponents reported by other authors for very blunt objects such as disks on one end of the spectrum, and long slender cylinders on the other. Furthermore, we expect that the drag force exerted on the cones will become lower as the L/D of the cone is increased.
    URI
    http://hdl.handle.net/10919/77036
    Collections
    • Masters Theses [19642]

    If you believe that any material in VTechWorks should be removed, please see our policy and procedure for Requesting that Material be Amended or Removed. All takedown requests will be promptly acknowledged and investigated.

    Virginia Tech | University Libraries | Contact Us
     

     

    VTechWorks

    AboutPoliciesHelp

    Browse

    All of VTechWorksCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    Log inRegister

    Statistics

    View Usage Statistics

    If you believe that any material in VTechWorks should be removed, please see our policy and procedure for Requesting that Material be Amended or Removed. All takedown requests will be promptly acknowledged and investigated.

    Virginia Tech | University Libraries | Contact Us