Nitrate utilization as the final electron acceptor in a biological phosphorus removal system

Abstract

The study of nitrate utilization as the final electron acceptor in biological phosphorus removal systems was investigated. The objectives of the study were (1) to determine whether polyphosphate (polyP) microorganisms can use nitrate as the final electron acceptor, and (2) to evaluate and compare polyP accumulation in the biomass of the system using nitrate as the terminal electron acceptor to the system using oxygen as the terminal electron acceptor. Two lab-scale biological phosphorus removal systems were operated as the A/O Process under the same conditions except for the terminal electron acceptor involved. The first system, System I, was operated as an Anaerobic/Anoxic process and the other, System II, was operated as an Anaerobic/Anoxic process. Both systems were operated at a 5-day sludge age and the same nominal hydraulic retention time of 9.1 hours (2.9 hours anaerobic, 6.2 hours anoxic or aerobic). The sludge recycle flow rate was equal to the influent flow rate. The two systems were fed with the same domestic wastewater spiked with sodium acetate and potassium phosphate to give the wastewater a COD concentration of 300-400 mg/L and a phosphorus concentration of 13-14 mg/L as P. Nitrate was fed to the second reactor of System I, while the second reactor of System II was aerated.

The results showed that polyP microorganisms can use nitrate as the final electron acceptor. In this research, the Anaerobic/Anoxic system removed more phosphorus (74 mg P/day) from solution than the Anaerobic/Aerobic system (64 mg P/day). The phosphorus content of the sludge in the Anaerobic/Anoxic system was greater than that of the Anaerobic/Aerobic system, i.e. 6.5% as compared to 5.6%.

The above evidence strongly confirms that polyP microorganisms can use nitrate as the final electron acceptor and that excess biological phosphorus uptake occurs under anoxic condition. The implication is that COD stored in the anaerobic reactor can be used to simultaneously remove nitrogen and phosphorus, which can substantially reduce the amount of COD required for combined nutrient removal.