The Effects of Curvature on Turbulent Boundary Layers Over a 3D Bump Geometry: An Experimental Study Using BeVERLI Hill

dc.contributor.authorChen, Fangzhouen
dc.contributor.committeechairLowe, Kevin T.en
dc.contributor.committeememberBorgoltz, Aurelienen
dc.contributor.committeememberDevenport, William J.en
dc.contributor.departmentAerospace and Ocean Engineeringen
dc.date.accessioned2025-01-24T09:01:12Zen
dc.date.available2025-01-24T09:01:12Zen
dc.date.issued2025-01-23en
dc.description.abstractThis thesis presents an experimental investigation of the effects of curvature on turbulent boundary layers using the Benchmark Validation Experiment for RANS and LES Investigations (BEVERLI) Hill setup. The study focuses on analyzing the flow behavior over a three-dimensional bump geometry that incorporates both concave and convex surfaces, with the aim of improving the understanding of the complex interactions among curvature, pressure gradients, and turbulence characteristics. The study examines the mean velocity, Reynolds shear stresses, pressure gradient, turbulence intensity, and pressure coefficient variations in relation to the bump curvature. The results are consistent with prior studies on the destabilizing influence of concave curvature with observations such as increased turbulence intensity, a decrease in mean velocity relative to the free-stream velocity U<sub>∞, and higher Reynolds stresses normalized by U<sup>2<sub>∞ throughout entire turbulent boundary layer, particularly in the near-wall region. Convex curvature results are consistent with prior study as well, which exhibits a stabilizing effect, shown to reduce turbulence intensity, an increase mean velocity relative to the free-stream velocity U<sub>∞, and lower Reynolds stresses normalized by U<sup>2<sub>∞ throughout entire boundary layer. This study also highlights the influence of pressure gradient effect, which acts with the curvature effect, impacts the boundary layer stability. This interaction is observed in amplification of turbulence with increasing of turbulence intensity and boundary layer growth. This stability particularly reflects on the embedded shear layers with inflection points which can create conditions for linear instabilities to grow, thus enhancing coherent turbulent motions. Furthermore, the thesis discusses the challenges in separating the influence of curvature from pressure gradient effects in current model, and proposes future research directions to address this issue. By conducting experiments under controlled pressure gradient flow conditions over concave and convex curvature, researchers can analyze the contributions of curvature effect separately from pressure gradient effect. Alternatively, using a hybrid RANS-LES model, will lead to a more precise understanding of flow dynamics over curved surfaces.en
dc.description.abstractgeneralThis thesis explores the influence of curvature on turbulent boundary layers, as it passes over a three-dimensional bump structure with both concave (curved inward) and convex (curved outward) surfaces. By conducting experimental data computed from prior studies of the BeVERLI project, the study investigates how the curvature of the surface affects the flow's mean velocity, Reynolds shear stresses, pressure gradients, and turbulence intensity. The findings highlighted the complex interactions between the curvature effect and pressure gradient effect on turbulent boundary layers, and provided valuable insights for future work references on the study of curvature effects on turbulent boundary layers.en
dc.description.degreeMaster of Scienceen
dc.format.mediumETDen
dc.identifier.othervt_gsexam:41953en
dc.identifier.urihttps://hdl.handle.net/10919/124340en
dc.language.isoenen
dc.publisherVirginia Techen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subject3D Turbulent Flowen
dc.subjectBoundary Layeren
dc.subjectCurvature effecten
dc.subjectBeVERLI Hillen
dc.subjectPressure gradient effecten
dc.subjectSurface longitudinal curvatureen
dc.titleThe Effects of Curvature on Turbulent Boundary Layers Over a 3D Bump Geometry: An Experimental Study Using BeVERLI Hillen
dc.typeThesisen
thesis.degree.disciplineAerospace Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.levelmastersen
thesis.degree.nameMaster of Scienceen

Files

Original bundle
Now showing 1 - 2 of 2
Loading...
Thumbnail Image
Name:
Chen_F_T_2025.pdf
Size:
10.04 MB
Format:
Adobe Portable Document Format
Loading...
Thumbnail Image
Name:
Chen_F_T_2025_support_1.pdf
Size:
1.75 MB
Format:
Adobe Portable Document Format
Description:
Supporting documents

Collections