The Wall Pressure Spectrum of High Reynolds Number Rough-Wall Turbulent Boundary Layers

dc.contributor.authorForest, Jonathan Bradleyen
dc.contributor.committeechairDevenport, William J.en
dc.contributor.committeememberSchetz, Joseph A.en
dc.contributor.committeememberLowe, K. Todden
dc.contributor.committeememberAnderson, Jasonen
dc.contributor.departmentAerospace and Ocean Engineeringen
dc.description.abstractThe presence of roughness on a surface subject to high Reynolds number flows promotes the formation of a turbulent boundary layer and the generation of a fluctuating pressure field imposed on the surface. While numerous studies have investigated the wall pressure fluctuations over zero-pressure gradient smooth walls, few studies have examined the effects of surface roughness on the wall pressure field. Additionally, due to the difficulties in obtaining high Reynolds number flows over fully rough surfaces in laboratory settings, an even fewer number of studies have investigated this phenomenon under flow conditions predicted to be fully free of transitional effects that would ensure similarity laws could be observed. This study presents the efforts to scale and describe the wall pressure spectrum of a rough wall, high Reynolds number turbulent boundary layer free of transitional effects. Measurements were taken in the Virginia Tech Stability Wind Tunnel for both smooth and rough walls. A deterministic roughness fetch composed of 3-mm hemispheres arranged in a 16.5-mm square array was used for the rough surface. Smooth and rough wall flows were examined achieving Reynolds numbers up to Re<sub>θ</sub> = 68700 and Re<sub>θ</sub> = 80200 respectively, with the rough wall flows reaching roughness based Reynolds numbers up to k<sub>g</sub><sup>+</sup> = 507 with a simultaneous blockage ratio of δ/k<sub>g</sub> = 76. A new roughness based inner variable scaling is proposed that provides a much more complete collapse of the rough wall pressure spectra than previous scales had provided over a large range of Reynolds numbers and roughness configurations. This scaling implies the presence of two separate time scales associated with the near wall turbulence structure generation. A clearly defined overlap region was observed for the rough wall surface pressure spectra displaying a frequency dependence of Ï <sup>-1.33</sup>, believed to be a function of the surface roughness configuration and its associated transport of turbulent energy. The rough wall pressure spectra were shown to decay more rapidly, but based on the same function as what defined the smooth wall decay.en
dc.description.degreeMaster of Scienceen
dc.publisherVirginia Techen
dc.rightsIn Copyrighten
dc.subjecthigh Reynolds numberen
dc.subjectrough wallen
dc.subjectturbulent boundary layeren
dc.subjectsurface pressureen
dc.titleThe Wall Pressure Spectrum of High Reynolds Number Rough-Wall Turbulent Boundary Layersen
dc.typeThesisen and Ocean Engineeringen Polytechnic Institute and State Universityen of Scienceen


Original bundle
Now showing 1 - 2 of 2
Thumbnail Image
424.54 KB
Adobe Portable Document Format
Thumbnail Image
9.1 MB
Adobe Portable Document Format