Synchrophasor Based Centralized Remote Synchroscope for Power System Restoration
| dc.contributor.author | Barik, Tapas Kumar | en |
| dc.contributor.committeechair | Centeno, Virgilio A. | en |
| dc.contributor.committeemember | De La Ree, Jaime | en |
| dc.contributor.committeemember | Kekatos, Vasileios | en |
| dc.contributor.department | Electrical and Computer Engineering | en |
| dc.date.accessioned | 2018-04-18T18:27:40Z | en |
| dc.date.available | 2018-04-18T18:27:40Z | en |
| dc.date.issued | 2018 | en |
| dc.description.abstract | The process of Synchronization between two buses in a power system plays a vital role, especially during blackstart or bulk power system restoration period. The synchronization process is primarily monitored in the presence of experienced personnel at the substation level, which might not control or even predict the after effects of synchronization as soon as the synchronizing breaker between the two buses respective to the two islands is closed. However, with the advent of phasor measurement units (PMUs) providing time synchronized synchrophasor data, synchroscope functionality can now be implemented at a centralized remote control platform, usually the control room of the specific utility. This thesis presents a technique along with the actual implementation of such a PMU Synchroscope analytic developed as a part of the Department of Energy sponsored open and Extensible Control and Analytics platform for synchrophasor data (openECA project). The challenges faced to realize this functionality at the centralized remote location along with methods to overcome these hurdles have been discussed in the document. Additional features in comparison to the conventional synchroscope device are also added to facilitate a smoother and successful synchronization, reducing error on behalf of the user /operator and thus, facilitating a faster power system restoration. | en |
| dc.description.abstractgeneral | Successful and proper synchronization between different nodes of a power system is one of the most crucial stages of restoring power after a major wide area electricity outage. Improper synchronization may lead to additional system outages and might delay the restoration process. In this regards, it is desired to perform this vital task at the electric utility’s central remote control room. This thesis develops an application to perform the successful reconnection between two nodes of a system overcoming the various challenges and incorporating system delays. The application designed is based on real-time measurements and is integrated with an open source framework platform for ease of the user. | en |
| dc.description.degree | Master of Science | en |
| dc.format.medium | ETD | en |
| dc.identifier.uri | http://hdl.handle.net/10919/82849 | en |
| dc.language.iso | en | en |
| dc.publisher | Virginia Tech | en |
| dc.rights | In Copyright | en |
| dc.rights.uri | http://rightsstatements.org/vocab/InC/1.0/ | en |
| dc.subject | Phasor Data Concentrators | en |
| dc.subject | Synchrophasors | en |
| dc.subject | Synchroscope | en |
| dc.subject | Voltage Sensitivities | en |
| dc.title | Synchrophasor Based Centralized Remote Synchroscope for Power System Restoration | en |
| dc.type | Thesis | en |
| thesis.degree.discipline | Electrical Engineering | en |
| thesis.degree.grantor | Virginia Polytechnic Institute and State University | en |
| thesis.degree.level | masters | en |
| thesis.degree.name | Master of Science | en |