Demonstration of active structural acoustic control of cylinders

TR Number

Date

1992

Journal Title

Journal ISSN

Volume Title

Publisher

Virginia Tech

Abstract

Active control is applied to reduce noise emission from a vibrating elastic cylinder by exerting forces on the cylinder that cancel the noise-generating vibration. This technique is called Active Structural Acoustic Control (ASAC) (Fuller, 1987). Sensors are implemented using piezoelectric film, and actuators are implemented using piezoceramic material. Both analog and digital noise cancellation control algorithms are used to reduce the noise emission from the cylinder. Two-cylinder boundary conditions are taken as case studies. The first boundary condition is the open cylinder case. The second boundary condition is where the cylinder has an end plate bolted to each end.

Actuator placement and the sensor design are done by first obtaining the natural frequencies and mode shapes of the cylinder using both analytical and experimental methods. Modal sensors developed and tested in previous work (Lee, 1989) are applied.

After preliminary control experiments with analog feedback loop show that control can be done with the sensors and the actuators, digital signal processing hardware programmed with the filtered-x Least-Mean-Square adaptive control algorithm is used to control the vibration of the cylinder. The excitation is single-tone on-resonance. Acoustic - testing demonstrates that ASAC reduces the sound pressure level generated by the vibrating cylinder by up to 29 dB in the reverberant field. Vibration measurement reveals that the reduction in sound emission from the cylinder is a result of reduction in vibration. The adaptive controller reduces the vibration level by up to 68 dB.

Description

Keywords

Citation

Collections