Investigation of the Effect of Corrugated Boxes on the Distribution of Compression Stresses on the Top Surface of Wooden Pallets
dc.contributor.author | Clayton, Anthony Page II | en |
dc.contributor.committeechair | Horvath, Laszlo | en |
dc.contributor.committeemember | Gething, Brad A. | en |
dc.contributor.committeemember | Bouldin, John Conrad | en |
dc.contributor.department | Forest Resources and Environmental Conservation | en |
dc.date.accessioned | 2019-01-11T09:00:18Z | en |
dc.date.available | 2019-01-11T09:00:18Z | en |
dc.date.issued | 2019-01-10 | en |
dc.description.abstract | Pallets are the foundation of unit loads and supply chains. They provide a way to store and transport products in an efficient manner. The load capacity of pallets greatly depends on the type of packages carried by the pallet; however, current pallet design methods do not consider the effect of packages on the load carrying capacity of the pallet. This results in excessive use of materials which reduces the sustainability of unit loads, drives costs up, and creates issues for people in the supply chain. The objective of this study was to investigate the effect of a corrugated box's size and head space on pallet deflection and stress distribution on the top of the pallet as a function of pallet stiffness across multiple pallet support conditions. Data analysis identified that box size had a significant effect on the deflection of the pallet. This effect was only significant for warehouse racking across the width and length support conditions. As much as a 53% reduction in pallet deflection was observed for high stiffness pallets supporting corrugated boxes with 25.4 mm headspace when the size was increased from small to large. Meanwhile, no significant effect of box size was found for other supports. The effect of headspace was significant in some scenarios but inconsistent thus more investigation with a larger sample size is recommended. In addition, redistribution of vertical compression stresses towards the supports was observed as a function of the increasing box size. The increased concentration of compression stresses on top of the supports and the resulting lower pallet deflection could significantly increase the actual load carrying capacity of some pallet designs. | en |
dc.description.abstractgeneral | Pallets are the foundation of unit loads and supply chains. They provide a way to store and transport products in an efficient manner. The load capacity of pallets greatly depends on the type of packages carried by the pallet; however, current pallet design methods do not consider the effect of packages on the load carrying capacity of the pallet. This results in excessive use of materials which reduces the sustainability of unit loads, drives costs up, and creates issues for people in the supply chain. The objective of this study was to investigate the effect of a corrugated box’s size and head space on pallet deflection and stress distribution on the top of the pallet as a function of pallet stiffness across multiple pallet support conditions. The data from the study identified that box size does have an effect on the deflection of the pallet but, it was only found to be significant for the warehouse racking supports. The highest reduction in pallet deflection was 53% on the high stiffness pallets carrying corrugated boxes with 25.4 mm of headspace as the boxes increased in size. The other support conditions showed no significant effect of the box size. Headspace showed some significant effect in some conditions but was found inconsistent, therefore an investigation with a larger sample size is recommended. In addition, the redistribution of vertical compression stresses towards the supports was observed as a function of increasing box size. This increase in stress on the supports resulted in lower pallet deflection that could significantly increase the actual load carrying capacity of some pallet designs. | en |
dc.description.degree | Master of Science | en |
dc.format.medium | ETD | en |
dc.identifier.other | vt_gsexam:17319 | en |
dc.identifier.uri | http://hdl.handle.net/10919/86663 | en |
dc.publisher | Virginia Tech | en |
dc.rights | In Copyright | en |
dc.rights.uri | http://rightsstatements.org/vocab/InC/1.0/ | en |
dc.subject | Pallets | en |
dc.subject | Unit Load | en |
dc.subject | Pressure Distribution | en |
dc.subject | Load Bridging | en |
dc.subject | Corrugated Boxes | en |
dc.subject | Packaging | en |
dc.title | Investigation of the Effect of Corrugated Boxes on the Distribution of Compression Stresses on the Top Surface of Wooden Pallets | en |
dc.type | Thesis | en |
thesis.degree.discipline | Forest Products | en |
thesis.degree.grantor | Virginia Polytechnic Institute and State University | en |
thesis.degree.level | masters | en |
thesis.degree.name | Master of Science | en |
Files
Original bundle
1 - 1 of 1