VTechWorks staff will be away for the winter holidays starting Tuesday, December 24, 2024, through Wednesday, January 1, 2025, and will not be replying to requests during this time. Thank you for your patience, and happy holidays!
 

Evaluation of Continuous Friction Measuring Equipment (CFME) for Supporting Pavement Friction Management Programs

Simple item page
dc.contributor.authorNajafi, Shahriaren
dc.contributor.committeechairFlintsch, Gerardo W.en
dc.contributor.committeememberIzeppi, Edgar D. de Leonen
dc.contributor.committeememberMcGhee, Kevin K.en
dc.contributor.committeememberWang, Linbingen
dc.contributor.departmentCivil and Environmental Engineeringen
dc.date.accessioned2015-02-02T20:32:56Zen
dc.date.adate2010-12-28en
dc.date.available2015-02-02T20:32:56Zen
dc.date.issued2010-12-07en
dc.date.rdate2015-02-02en
dc.date.sdate2010-12-13en
dc.description.abstractIt is the responsibility of pavement engineers to design pavements that provide safe and smooth riding surfaces over their entire life cycle. Each year many people around the world lose their lives in vehicle crashes, which are one of the leading causes of death in the United States (US). One of the contributing factors in many of these crashes is inappropriate friction between tires and the pavement. To minimize the impact of this factor, state Departments of Transportation (DOTs) must monitor the friction of their pavement networks systematically and regularly. Several devices are used around the world for measuring friction. Locked-wheel skid trailers are the predominant technology for roadways in the U.S. However, Continues Friction Measuring Equipment (CFME) is emerging as a practical alternative, especially for network-level monitoring. This type of technology has been used for monitoring runway friction for many years and is starting to be used also for measuring roadway friction. This thesis evaluates the different operational characteristics of CFME to provide guidelines for highway agencies interested in using this technology for supporting their friction management programs. It follows a manuscript format and is composed of two papers. The first part of the thesis presents a methodology to objectively synchronize and compare CFME measurements using cross-correlation. This methodology allows for comparing the “shape” of the friction profiles, instead of only the average friction values. The methodology is used for synchronizing friction measurements and assessing the repeatability and reproducibility of the CFME using friction measurements taken on a wide range of surfaces at the Virginia Smart Road. The proposed approach provides highway agencies with a rigorous method to process CFME measurements. The second part of the thesis evaluates the impact of several operational characteristics on the CFME measurements using a field experiment. The results of the experiment confirmed that the measurements are significantly affected by (1) the direction of testing while testing on sections of road with a significant grade, (2) water film thickness, and (3) testing speed. The experiment showed that measurements taken downhill on a 6% grade were significantly higher than those taken uphill. The analysis also verified that, consistent with previous studies, the measured friction decreases with higher water depth and testing speeds. It also showed that the change of friction with speed is approximately linear over the range of speeds used in the experiment. In general, the thesis results suggest that CFME can provide repeatable and reproducible friction profiles that can be used to support friction management programs and other asset management business functions. However, care should be taken with regard to the operational conditions during testing since the measurements are affected by several factors. Further research is needed to (1) quantify the effect of these, and potentially other, operational factors; and (2) establish standard testing condition and approaches for correcting measurements taken under other conditions.en
dc.description.degreeMaster of Scienceen
dc.format.mediumETDen
dc.identifier.otheretd-12132010-111100en
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-12132010-111100/en
dc.identifier.urihttp://hdl.handle.net/10919/51244en
dc.language.isoen_USen
dc.publisherVirginia Techen
dc.relation.haspartNajafi_Shahriar_T_2010.pdfen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectlocked wheelen
dc.subjectCFMEen
dc.subjectrepeatabilityen
dc.subjecttesting devicesen
dc.subjectsafetyen
dc.subjectpavementen
dc.subjectreproducibilityen
dc.subjectfrictionen
dc.titleEvaluation of Continuous Friction Measuring Equipment (CFME) for Supporting Pavement Friction Management Programsen
dc.typeThesisen
thesis.degree.disciplineCivil and Environmental Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.levelmastersen
thesis.degree.nameMaster of Scienceen

Files

Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Najafi_Shahriar_T_2010.pdf
Size:
7.84 MB
Format:
Adobe Portable Document Format
Download
License bundle
Now showing 1 - 1 of 1
Name:
license.txt
Size:
1.5 KB
Format:
Item-specific license agreed upon to submission
Description:
Download

Collections

Masters Theses