Mean Flow Characteristics and Turbulent Structures of Turbulent Boundary Layers in Varying Pressure Gradients and Reynolds Numbers

dc.contributor.authorSrivastava, Surabhien
dc.contributor.committeechairLowe, K. Todden
dc.contributor.committeecochairDevenport, William J.en
dc.contributor.committeememberSzőke, Mátéen
dc.contributor.departmentAerospace and Ocean Engineeringen
dc.date.accessioned2023-02-01T20:41:04Zen
dc.date.available2023-02-01T20:41:04Zen
dc.date.issued2023en
dc.description.abstractTurbulent boundary layers flowing over a smooth surface were studied to understand the influence of varying pressure gradients and flow Reynolds number on the boundary layer growth and mean turbulent properties. The test was conducted in the Virginia Tech Stability Wind Tunnel with a 0.914 m chord length, NACA 0012 Airfoil in the test section. This airfoil was rotated to different angles of attack to induce varying pressure gradients on the boundary layer developing on the test section walls. Mean pressure measurements, boundary layer pressure measurements, and time-resolved, wall-normal, stereoscopic particle image velocimetry (TR-PIV) measurements were made. The TR-PIV data was acquired at a chord-based Reynolds number of 1.2 million, 2 million, and 3.5 million, at a sampling rate of 1 kHz, in two different camera configurations. The boundary layer pressure measurements were acquired at different flow Reynolds numbers ranging between 0.76 million and 3.5 million. Both adverse and favorable pressure gradients of varying intensities were imposed on the boundary layer by rotating a 0.914 m chord NACA 0012 airfoil to angles of attacks between -{10}^o and {12}^o. Measurements at varying streamwise locations enabled the study of boundary layer flow development under changing pressure gradients. The pressure gradient influences were observed in the boundary layer characteristic properties, on the mean velocities, and on the Reynolds stresses present in the flow. The pressure gradient influences were found to be consistent at varying Reynolds numbers, but the intensity of their effects was influenced by the flow Reynolds number. Moreover, the influence of pressure gradients and flow Reynolds numbers was evident in both outer and inner scales. The test data acquired was also validated with previous works.en
dc.description.abstractgeneralThe interaction of turbulent boundary layers and smooth surfaces is prevalent in our world. It plays a vital role in various phenomena, such as, aircraft stall, cabin noise, and structural vibrations. Varying flow conditions influence the behavior of boundary layers and the extent of their implications. The effects of pressure gradients and the level of turbulence, described by the Reynolds numbers, on turbulent boundary layer flow was studied. This was done through an experiment conducted at the Virginia Tech Stability Wind Tunnel facility. The test data was acquired through boundary layer pressure measurements and Time-Resolved, Stereoscopic Particle Image Velocimetry (TR-PIV) at varying streamwise locations in the test section. A 0.914 m chord, NACA 0012 airfoil was placed in the test section and its angle of attack was varied to -{10}^o,0^o,\ \ and\ {12}^o to induce a favorable, minimum, and an adverse pressure gradient, respectively. The TR-PIV measurements were acquired at a sampling rate of 1 kHz and in two different camera configurations. The flow Reynolds number was based on the airfoil chord length (Re_c) and was varied to 1.2 million, 2 million, and 3.5 million for the TR-PIV tests. The boundary layer pressure measurements were acquired using an array of 30 Pitot probes placed in the boundary layer of the flow. The flow Reynolds number for these test runs ranged between 0.76 million and 3.5 million. The acquired data was used to analyze the mean statistical properties of turbulent boundary layers primarily focusing on the mean velocities, boundary characteristic parameters, Reynolds normal stresses, and Reynolds shear stresses. The results showed that the nature of pressure gradient influences on the mean properties of turbulent boundary layers remained consistent regardless of the flow Reynolds number. However, the intensity of the pressure gradient effects was influenced by the flow Reynolds number. These observations were made at various streamwise data acquisition locations through which the evolution of the flow was also studied. Lastly, the results obtained in this experiment were validated with previous works.en
dc.description.degreeM.S.en
dc.format.mediumETDen
dc.format.mimetypeapplication/pdfen
dc.identifier.urihttp://hdl.handle.net/10919/113619en
dc.language.isoenen
dc.publisherVirginia Techen
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 Internationalen
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/en
dc.subjectTurbulent boundary layersen
dc.subjectReynolds stressesen
dc.subjectPressure Gradientsen
dc.subjectReynolds number Variationen
dc.subjectTR-PIVen
dc.subjectBoundary Layer Rakeen
dc.subjectMean Pressure Measurementsen
dc.titleMean Flow Characteristics and Turbulent Structures of Turbulent Boundary Layers in Varying Pressure Gradients and Reynolds Numbersen
dc.typeThesisen
thesis.degree.disciplineAerospace Engineeringen
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen
thesis.degree.levelmastersen
thesis.degree.nameM.S.en

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Srivastava_S_T_2022.pdf
Size:
4.11 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
Name:
license.txt
Size:
1.5 KB
Format:
Item-specific license agreed upon to submission
Description:

Collections