Adaptive Mode Control in Few-Mode and Highly Multimode Fibers

Few-mode fibers (FMFs) and multimode fibers (MMFs) can provide much higher data-carrying capacities compared with single-mode fibers. But in order to achieve this goal, one must address the challenge of intermodal coupling and dispersion. Therefore the ability to accurately control the optical signal propagation in FMFs/MMFs can play a pivotal role in FMF/MMF applications. This thesis demonstrates the ability to excite, in FMFs and MMFs, the desired linearly polarized (LP) modes as well as their superpositions through adaptive optics (AO). Specifically, in the case of step-index FMFs, a phase-only spatial light modulator (SLM) is employed to manipulate the light at the fiber input end, driven by the feedback signal provided by the correlation between the charge coupled device (CCD) camera captured images at the fiber output end and the target light intensity profile. Through such an adaptive optical system, any arbitrarily selected LP modes can be excited at the distal end of the four-mode and seventeen-mode fibers, respectively. For a graded-index MMF with a uniform Bragg grating, we use a deformable mirror (DM) to perform the wavefront modulation at the fiber input end, where the feedback is based on the ratio of the grating-reflected signal power to the transmitted signal power. At the Bragg grating position of this highly multimode fiber, any desired principal mode groups can be successfully chosen. These experimental results suggest that adaptive control of optical wavefront in FMFs/MMFs is indeed feasible.